I just tried to do an xref and the command stops everything. I get no reaction from autocad. What is wrong?
here is an update: The Xref Palette is docked to my left side and when I hover to get it to flip out I click the DWG button in the left hand upper corner. Well nothing happens from there. Now, when I type -xref the command works at the command line. How do I get the palette to work again?
I am trying to xref a file in and when I select open through _XATTACH nothing happens. No subsequent dialog box opens up asking me to choose location, rotation, attach/bind, etc. The command just dies and I am back in my dwg.
AutoCAD LT 2011
AutoCAD Civil 3D 2012
I installed Infrastructure Design Suite 2013 on my pc to try, when using 2012.
F1 doesn't work and neither does any of the buttons on the Help ribbon. I haven't uninstalled the 2013 version yet. Was hoping to not have to.
We have had this problem on several computers in the office and it seems to happen at random. The existing tags in the files still read correctly, but if you try to insert a new tag, or a room name or number updates, the only way to get them to read the correct space information is to close AA and restart it. I have not been able to identify any common circumstances when this occurs.
We are on AA 2010. This morning I had barely been in the program an hour when I had to restart just to change a room name.
I must have changed some dam switch or something. DBLCLKEDIT is set to on and CUI is setup for some double click actions.
View 2 Replies View RelatedWe are have been using Inventor to draw wooden furniture for a couple years, and have a custom appearance library with several different finishes (using photos of actual finished pieces of wood). Every now and then a part (ipt) takes a notion to not change to the color we set it to, seemingly without ryhme or reason. This mostly occurs with mirrored parts, but occasionally a standard (not mirrored part) will do this as well.
We have done all the obvious things, and some not so obvious. The path to the photos and the library is added to the project, and I opened the Appearance Browser and checked to make sure appearance knows where to find its bmp file, and it still doesn't do it to change color. And yes, I tried restarting my computer, because a couple days ago I was working with the Appearance Browser, and sometimes restarting Inventor made a difference in whether certain things worked or didn't work. This is also not limited to one computer, it acts like this on all of our computers.
We are using some png files and some bmp picture files. Would the file format maybe have something to do with it ?
This may sound like a stupid question but I have been doing a bunch of work on different photos over the last few days and every thing has been working fine.
Today I had the program open and was working on a project with the eraser tool and I had to leave to answer the phone. When I left the tool was working fine while I was away from the computer it kicked into sleep mode. When I came back and went to start where I left off the eraser tool would do nothing.
I have since garbaged that whole project, restarted my computer reset all the tools you name it and I can not get that or the paint brush to work.
The eraser tool will make a very fine scratch no matter how I set it.
What happened while I was away from my desk????
I do not have any kids or anyone else that would have messed something up.
Does anyone have any ideas, is it something simple or should I try reloading the program?
I am currently using the trial version of PS CS3 on a vista machine. (my true copy is on the way) Droplets worked yesterday but suddenly don't work today.
View 1 Replies View RelatedMy adjustment brush in LR 5 suddenly quit working. It paints a white smudge instead of doing what it should. Even with the latest update, Ver. 5.2, the results are the same.
View 2 Replies View RelatedLast night, I downloaded an update for Photoshop CS6, Windows 8, 64 bit. The update failed, and I can't get PS to run at all.How can I restore my program?
View 7 Replies View RelatedPSPX5 on a Win7 machine.I've been using this program a long time. Been using this setup for almost a year. Suddenly, the "preview" pane of the the "manage" tab has just quit working. It's whited out. I click on a thumbnail and the image info shows on the side pane, but the main frame just remains white. I've tried restarting the machine, to no avail. I can try uninstalling and reinstalling, but would rather not.
View 5 Replies View RelatedAll of a sudden my Copy Function quit working in Corel x5.
I can copy from other programs and paste into Corel, but I cannot copy from one file to another file (or the same file even) within Corel.
I was told it could be a possible update from Windows 7 causing it and that I need to reinstall my software.
I can use xrefs on different project but right now on autocaddLT 2014 it doesn't work.
View 9 Replies View RelatedI've finished drawing my ground floor and now I need to draw my second floor. I read in a tutorial that the best way to do this is using the Xref command to know where is the walls, bathrooms and etc.
But I didn't get it at all. I need to draw my second floor in the same drawing. So what's the easiest way to do that?
After that I need to have a drawing with my second floor walls in dashed thin lines over my first floor. How can it be done?
what the command that controls the fade effect for xref's in LT '09?
View 2 Replies View RelatedWhat is the command to create an X-Ref from my drawing?
View 9 Replies View RelatedWhile working in my topo drawing I used the "reverse" command to flip all my linetypes (water, over head wire, gas) to show correctly. My topo is x referenced into my utility drawing and my x reference lines will not flip. i have reloaded, i have closed and re opened, i have regenerated. No luck...
View 3 Replies View Relatedi type in xr and the box shows up but when i go to attach a dwg or image the box usually shows up so i can browse through and find the dwg i want to xref but the box doesn't show up all it says at the bottom in the command line is ATTACH
If i use the command classicxref then everything is fine i can attach anything i want. i checked the filedia and it is set to (1)
my xref reloading in acad v2011, it's not working-but the xref file is in the folder and in the right path as well.
View 9 Replies View Relatedxref fade control not working?In model space I have xref'd a dwg (probably 2010 format) and it positions correct and displays in the normal default faded mode. No matter where I have the slider in display options, the xref fade does not change. Even changing the system variable through the command line is ineffective.
I'm running AutoCAD 2013 with Service Pack 1.1. installed.
I have loaded an xref in to my working file. I temporarily unloaded the xref so that it would not be in the way as I was editing my drawing. Even though the xref is unloaded and I can not see it on screen it still highlights and becomes visible as if I picked it with my fence while I am trying to edit other entities to my drawing.
View 3 Replies View Relatedhere is the question,basicly, i have a folder named "A", and this folder include 5 DWGs, named 1,2,3,4,5. "1" is the main DWG, so, 2,3,4,5 is attached or overlayed to main file. First step im copying this folder from server, and im pasting to my desktop.Im doing some modifications on xref files, and im uploading "A" folder to my friend's partage from local company server. its allright till here..
my collegue is copying this same folder "A" and opening main file, and main file reading another "3" file from his desktop... this is the problem. file names are same, and it has to be this way. i want to make the main file read from its own folder. we are using 2008, 2012.
I am trying to bind an Xref into my working drawing. Whenever I try to perform this command, an error message appears that says "Some objects in the specified Xref(s) failed to bind." No list of objects has been provided. I have tried exploding, purging and auditing both the Xref and the working drawing to make sure there are no extranneous objects in the files, but the message keeps appearing.
View 6 Replies View RelatedI am trying to insert OS Tiles into a drawing using the insert x-ref command. I have managed to insert 192 tiles but still need to add 29 more tiles to complete. When I try to insert another x reference AutoCAD just goes into a continual loop. Have to force AutoCAD to crash after ten minutes.
I am using AutoCAD 2014 MAP and have just had a new system built (i5 processor, 8GB RAM).
When I use the PLOT command in Autocad LT 2000, it isn't working. (Does nothing)
Only when I go to preview and click with right-mousebutton and use plot, the printer does his Job.
I am using AutoCAD 2008. My properties command has stopped working. I double left click - nothing! Right click and click properties - nothing! I click properties on the toolbar - nothing!
View 8 Replies View Relatedi want to divide a helix into number of segments...for this i used divide command..but its not working..what shall i do to divide the helix..no of segments or length of segment is not important.
View 9 Replies View RelatedMy ARCTEXT command won't work
View 2 Replies View Relatedif i'll press DEL button it'll not delete or E+Enter same it will not erase. after slection Commond is not working first i need to run commond then work so i want to slect then if i use any commond it should be work
View 4 Replies View RelatedMy company just switched over to AutoCAD 2014 and for some reason the PUBLISH command is not working, or following through with the printing once we complete the required steps to plot.
We are able to select the drawings to be plotted (8"x11" sheets), then successfully bring in our page setup that we created with one of the drawings to be plotted (which we use the same template with the same limits on ALL of our 'drawing templates' we design with.
After we hit the PUBLISH button at the bottom it goes into the background and just stays there with no errors or anything After a little while we end up just having to cancel and plot individually.
We used TrueView to BatchPlot which is identical to the batchplot(publishing) in ACAD 2014 WITH NO ISSUES!
i want to divide a helix into number of segments...for this i used divide command..but its not working..what shall i do to divide the helix..no of segments or length of segment is not important..
View 2 Replies View Related