I am trying to bind an Xref into my working drawing. Whenever I try to perform this command, an error message appears that says "Some objects in the specified Xref(s) failed to bind." No list of objects has been provided. I have tried exploding, purging and auditing both the Xref and the working drawing to make sure there are no extranneous objects in the files, but the message keeps appearing.
View 6 RepliesI'm attempting to bind an xref into a drawing. I keep getting an error message: "Some objects in the specified xref failed to bind." Any reason why some objects couldn't bind? I've thawed all layers in the drawings..
View 3 Replies View RelatedHow do I bind an ex referenced image file?
View 1 Replies View Relatedwhen you bind an xref the link disappears from the xref manager.
is it possible to bind an xref, but preserve that link in the xref manager? i realize that will lead to two copies of the same object in the drawing (one xref, plus the new block). everyone's okay with that happening.
I'm trying to bind a site survey produced in Land Autodesk to my drawing, however when I try I get this error message:
'Some objects in specified Xref(s) failed to bind' I've tried purging the survey prior to binding, but have had no success.
I am trying to bind a floor plan into a drawing an I get the error: at least one of the specified xrefs failed to bind due to a problem with a proxy object. The floor plan was created by an outside company and we did the electrical engineering. Now that our files are due to the customer, i have to get our drawings to bind.
View 3 Replies View RelatedI am currently updating and coming up with a better system for are plant layout file for AutoCAD. When this project is complete, it will be set up so if someone needs to make a change they can just make a copy of the X-Ref file for the area they will be updating and hand it back in when there done. I will review the updated X-Ref then switch out the old X-Ref file for the updated one.
Problem: the problem I am having is when I am in the master drawing that contains all the X-Ref files, the layers list becomes enormous. There are about 30 to 40 different X-Ref files with 15 layers each. Those 15 layers contain the exact same information but you have to edit them individually.
Question: Is there a way to make the 15 layers in the master effect the corresponding layer in all the X-ref files? For instance, you hide the “Machines” layer in the master and it hides the “Machines” layer in all the X-ref.
Side Note: If you were going to make the suggestion “use Xbind” I’ve tried it and it doesn’t work well because “Xbind” creates a new layer you have to assign to things instead of making the layers relate to one another.
when I open up the xref dialog box, i am right clicking on the xref and for the love of god, it won't let me bind the thing. Bind is ghosted...
View 2 Replies View Relatedis it possible to bind an an xref via ObjectDBX without opening the drawing?
View 1 Replies View RelatedOur company uses xref electromechanical,
some problem we encountered after binding the xref become a block mostly like a baseplan & equipment system . can't edit block In-place in block references in latest autocad 2014 LT.
Is there a setting that would cause a xref to detach itself when the drawing is closed? I have an existing model, went through the time to relocate all the attachments.
Once everything is attached I save my work close it out and move to another area, when I open up the model I was working on before with all the attachments that I had located, the xrefs are no longer attached and I must redo all the work that was done previously.
When I either attach or overlay my Xrefs they always appear dark in my drawing; is this normal? If I open the file (that I am xreferencing in) it is very clear.
View 3 Replies View RelatedI have a drawing where I have placed all of my natural gas piping. I have all of the annotative blocks set to 3/32"=1'-0" and 1/32"=1'-0" scales. They are both correctly displayed in this drawing.
When I xref this drawing into another about half of the 1/32" blocks show up correctly. The other half are shifted to the right off of the plan. All of the 3/32" blocks show up correctly.
Any variables that would cause my XREF paths to change from Full Path to Relative Path when I save a drawing?
This is something that just started happening recently and has me completely at a loss. I haven't installed any patches or hot fixes recently and nothing else has changed that I'm aware of.
Is there a way to bind a PDF to a drawing? I don't want to keep the original PDF
View 9 Replies View Related Is there anyway to bind a raster image to a drawing?
Everytime I bind/insert my title block the images dont bind in and also the file paths get deleted. Asked most of the drafters I know and everyone says it cant be done, which is what i think.
Normally I would use a CAD version of the Logos (for the client/architect,etc.) but sometime there isnt one available so have to use raster images.
I have been able to insert a PDF into an AutoCAD 2013 dwg but only as an attachment. This seems to be similar to xref but I can't seem to bind the pdf to the dwg. Therefore when I send the dwg to a client and they open it, they only see the drawing format and no PDF attachment. Sending the PDF as a separate file is not an acceptable solution.
Is there a way to insert a PDF and bind it to the dwg so an external reference file is not required?
I'm not interested in converting the PDF to a dxf or any other format. Just interested in knowing whether there is a way to insert and bind a PDF to an ACAD dwg.
As I can't bind a Tiff file (X-Ref) within AutoCad 2010, Is there another way to fully embed a tiff file into drawing file, so I only have to email one file to my client?
View 2 Replies View RelatedI have a full set of water drawing that need to be submitted to the City’s Water Department. We have to include DWF and DWG drawings on a CDRom, but that is easy. The issue is that there is a stand-alone submittal set. Now, this is not hard to do with Sheet Set Manager; that is not the problem. The problem is that the Water Department has a special set of layers that they want any Civil to use for submittal. These layers are of course different from the NCS we are using now and in our CD submittal set.
Is there a better way than to insert or bind the drawings to a special set of drawings and then change the names? I would most likely use either the “rename” command or the “layer translator” function in Civil 3D 2012. However, if I ever had a revision that affects the base drawing and the CD set; I would have to re do all this binging/inserting and renaming over as well.
The layer merge command is not working in one particular drawing. But fine in others and new files using the acad.dwt file.Is there a setting that effects the command.
View 6 Replies View RelatedI am trying to build a 3d model and I am requirng to draw 2d sketches in the side view e.g right but all the happens is that the polylines do not go at the angle I need them at they jsut go parallel to the bottom. Also how do i create like a plane which I can draw a flat sketch on which i can set an offset from my first sketch?
View 1 Replies View RelatedI am trying to xref a file in and when I select open through _XATTACH nothing happens. No subsequent dialog box opens up asking me to choose location, rotation, attach/bind, etc. The command just dies and I am back in my dwg.
AutoCAD LT 2011
AutoCAD Civil 3D 2012
i type in xr and the box shows up but when i go to attach a dwg or image the box usually shows up so i can browse through and find the dwg i want to xref but the box doesn't show up all it says at the bottom in the command line is ATTACH
If i use the command classicxref then everything is fine i can attach anything i want. i checked the filedia and it is set to (1)
my xref reloading in acad v2011, it's not working-but the xref file is in the folder and in the right path as well.
View 9 Replies View RelatedI just tried to do an xref and the command stops everything. I get no reaction from autocad. What is wrong?
here is an update: The Xref Palette is docked to my left side and when I hover to get it to flip out I click the DWG button in the left hand upper corner. Well nothing happens from there. Now, when I type -xref the command works at the command line. How do I get the palette to work again?
xref fade control not working?In model space I have xref'd a dwg (probably 2010 format) and it positions correct and displays in the normal default faded mode. No matter where I have the slider in display options, the xref fade does not change. Even changing the system variable through the command line is ineffective.
I'm running AutoCAD 2013 with Service Pack 1.1. installed.
I have loaded an xref in to my working file. I temporarily unloaded the xref so that it would not be in the way as I was editing my drawing. Even though the xref is unloaded and I can not see it on screen it still highlights and becomes visible as if I picked it with my fence while I am trying to edit other entities to my drawing.
View 3 Replies View Relatedhere is the question,basicly, i have a folder named "A", and this folder include 5 DWGs, named 1,2,3,4,5. "1" is the main DWG, so, 2,3,4,5 is attached or overlayed to main file. First step im copying this folder from server, and im pasting to my desktop.Im doing some modifications on xref files, and im uploading "A" folder to my friend's partage from local company server. its allright till here..
my collegue is copying this same folder "A" and opening main file, and main file reading another "3" file from his desktop... this is the problem. file names are same, and it has to be this way. i want to make the main file read from its own folder. we are using 2008, 2012.
A question about ex referencing. Can it be done within a drawing. In other words, can I can Xref the plan to another part of model space to then create the elevations in UCS, and then Exref the elevations from USC to a horizontal line.
This would be very useful in the sketch plan stage.
Suppose I have a Drawing Structure like:
MasterRoot
Root1
MasterChild1
Child
MasterChild2
Child
Root2
MasterChild1
Child
MasterChild2
Child
When I use XrefGraph xg = mainDb.GetHostDwgXrefGraph(true); in Code then I get all the Files as a node including MasterRoot (say count=6).
If I want to get Only direct Children (here, Root1 and Root2)(means count=2 only), then what i have to do?
Is there any advantage when inserting someone else drawing into yours to xref it rather than copy and pasting into your drawing?
View 1 Replies View Related