I'm trying to bind a site survey produced in Land Autodesk to my drawing, however when I try I get this error message:
'Some objects in specified Xref(s) failed to bind' I've tried purging the survey prior to binding, but have had no success.
I'm attempting to bind an xref into a drawing. I keep getting an error message: "Some objects in the specified xref failed to bind." Any reason why some objects couldn't bind? I've thawed all layers in the drawings..
View 3 Replies View RelatedI am trying to bind a floor plan into a drawing an I get the error: at least one of the specified xrefs failed to bind due to a problem with a proxy object. The floor plan was created by an outside company and we did the electrical engineering. Now that our files are due to the customer, i have to get our drawings to bind.
View 3 Replies View RelatedI am trying to bind an Xref into my working drawing. Whenever I try to perform this command, an error message appears that says "Some objects in the specified Xref(s) failed to bind." No list of objects has been provided. I have tried exploding, purging and auditing both the Xref and the working drawing to make sure there are no extranneous objects in the files, but the message keeps appearing.
View 6 Replies View RelatedI cannot find my point settings.
View 7 Replies View RelatedIs there a way to bind a PDF to a drawing? I don't want to keep the original PDF
View 9 Replies View Related Is there anyway to bind a raster image to a drawing?
Everytime I bind/insert my title block the images dont bind in and also the file paths get deleted. Asked most of the drafters I know and everyone says it cant be done, which is what i think.
Normally I would use a CAD version of the Logos (for the client/architect,etc.) but sometime there isnt one available so have to use raster images.
I have been able to insert a PDF into an AutoCAD 2013 dwg but only as an attachment. This seems to be similar to xref but I can't seem to bind the pdf to the dwg. Therefore when I send the dwg to a client and they open it, they only see the drawing format and no PDF attachment. Sending the PDF as a separate file is not an acceptable solution.
Is there a way to insert a PDF and bind it to the dwg so an external reference file is not required?
I'm not interested in converting the PDF to a dxf or any other format. Just interested in knowing whether there is a way to insert and bind a PDF to an ACAD dwg.
How do I bind an ex referenced image file?
View 1 Replies View RelatedI'm using C3D 2013. I received a survey drawing (unknown version) from a third party. I tried both xref'ing and inserting as block into my drawing and it was over 7,100' SW from my site. BUT when I copy from 0,0,0 in his drawing and paste 0,0,0 in my drawing, it lands on my site. If I xref my drawing into his drawing, it lands on his survey information. Why doesn't his drawing land on my site when I xref or insert as block?
View 6 Replies View RelatedTypically at my company we rotate our drawing orientation under the Projects - Drawing Setup - Orientation. Rotate the drawing to a known basis of bearings. Then we label the boundary and the bearings are rotated to match the basis of bearings without having to rotate the drawing in model space. Just reciently my labels havne't been holding the orientation. So when I add a static or dynamic label the bearing reads as though my orientation is due north. BUT, when I loook at the line priperties, the bearing is correct, as it has held the orientation.
View 4 Replies View RelatedAs I can't bind a Tiff file (X-Ref) within AutoCad 2010, Is there another way to fully embed a tiff file into drawing file, so I only have to email one file to my client?
View 2 Replies View RelatedI have a full set of water drawing that need to be submitted to the City’s Water Department. We have to include DWF and DWG drawings on a CDRom, but that is easy. The issue is that there is a stand-alone submittal set. Now, this is not hard to do with Sheet Set Manager; that is not the problem. The problem is that the Water Department has a special set of layers that they want any Civil to use for submittal. These layers are of course different from the NCS we are using now and in our CD submittal set.
Is there a better way than to insert or bind the drawings to a special set of drawings and then change the names? I would most likely use either the “rename” command or the “layer translator” function in Civil 3D 2012. However, if I ever had a revision that affects the base drawing and the CD set; I would have to re do all this binging/inserting and renaming over as well.
I am currently updating and coming up with a better system for are plant layout file for AutoCAD. When this project is complete, it will be set up so if someone needs to make a change they can just make a copy of the X-Ref file for the area they will be updating and hand it back in when there done. I will review the updated X-Ref then switch out the old X-Ref file for the updated one.
Problem: the problem I am having is when I am in the master drawing that contains all the X-Ref files, the layers list becomes enormous. There are about 30 to 40 different X-Ref files with 15 layers each. Those 15 layers contain the exact same information but you have to edit them individually.
Question: Is there a way to make the 15 layers in the master effect the corresponding layer in all the X-ref files? For instance, you hide the “Machines” layer in the master and it hides the “Machines” layer in all the X-ref.
Side Note: If you were going to make the suggestion “use Xbind” I’ve tried it and it doesn’t work well because “Xbind” creates a new layer you have to assign to things instead of making the layers relate to one another.
Eventually after I copy and paste with the clipboard enough times within one drawing, the ability goes away and I can no longer copy and past one item from one drawing to a separate drawing. I need to use the clipboard function because that is the only way of getting an item from one drawing to another.
I have download a clear clipboard function but it doesn't work. Closing CAD and restarting does not reinstate the function.
My Autocad has started a new behavior. When (in Win7) I double-click on a drawing file in Windows Explorer, Autocad opens the drawing file and also starts a new drawing, all in the same session of Autocad. Is there some system variable or Windows variable that controls this?
View 1 Replies View RelatedI realize it may be a Civil3D question. When I change my drawing scale in the "Drawing Settings" dialog box to 1"=40', for example. The Annotative scale in the Properties Palette changes to 1"=40'_XREF.
View 2 Replies View RelatedI'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:
1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.
2. I wrote this in the heading of the form's
- Imports Autodesk.AutoCAD.Interop
-Imports Autodesk.AutoCAD.Interop.Common
3. In the event Click of the Button1 I put this:
Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application
AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application
Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document
acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2
'Draw a line
Dim PT1(2) As Double
[code].....
I am quite new with autoCAD and am catching up pretty well but the problem now is this. I need to make a building plan for a land measuring 100 x 75 ft but I do not know how to draw the scale on my work space using autocad 2012.
View 9 Replies View RelatedDoes AutoDesk's ScriptPro will run on AutoCAD LT for drawing conversions? We have some CNC equipment which uses DXF files. We have had to convert the DXF files generated by our steel detailing software to DXF2000 using ScriptPro and AutoCAD in order for the CNC equipment to accept the file. ('Wondering if LT's lesser cost will be able to perform the same function.)
View 5 Replies View RelatedOK, I just did a new install of Civil 3D on a clean machine, were might I find the XML Reporting for 2013 so that I can edit the format and percision of the reports.
View 1 Replies View Related Last week I could import xml files just fine. Now when I go to import a xml I get
"_AeccLandXMLIn Unknown command "AECCLANDXMLIN". Press F1 for help."
what happens when we try to export corridor to Land XML file? Do we get design cross sections that surveyors can import in the equipment? I need to export my cl alignment with the design cross sections.
View 9 Replies View RelatedI have bearings and distances but I am wondering if using PLIN is the best method to draw parcels in AutoCad Map 2012. I have a layer of the Townships, Ranges and Sections that I hope to align with the drawings. Most of the time it looks okay meaning they line up and for the most are where they are suppose to be but ever so often I have problems.
View 2 Replies View RelatedI customer sent me a drawing template I need to use to submit a drawing to them. It is a ProE template which has a file extension of .frm.1 How to open this file extension and use it using either Autodesk Inventor or AutoCad?
View 1 Replies View Relatedwhen I open up the xref dialog box, i am right clicking on the xref and for the love of god, it won't let me bind the thing. Bind is ghosted...
View 2 Replies View RelatedI have 2011 LT and am trying to BIND a file. It says it can't because of Proxy Objects. I have tried to download enabler, that does not work. I have put on the web live enabler, that does not work. how I can bind these files?
View 1 Replies View RelatedHow do i bind some images to an AutoCAD drawing so when i send it to a company, they can view the images ?
View 9 Replies View RelatedWhen converting Land Desktop Points to Civil 3D, it doesn't display point labels, descriptions, elevations, or point numbers. How do I correct this?
View 9 Replies View RelatedI would like to export feature lines out as land xml file. Can this be done in Civil 3D or is there another work around.
View 5 Replies View RelatedI brought a site into a drawing by LandXML which had 35 feature lines in it. How do you get the actual linework of the feature lines to show up in your drawing? It shows them in the site but the linework is not there.
View 1 Replies View Related
