AutoCAD Civil 3D :: Convert Land Desktop Points
Aug 23, 2011When converting Land Desktop Points to Civil 3D, it doesn't display point labels, descriptions, elevations, or point numbers. How do I correct this?
View 9 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Point Shift On Convert Land Desktop Points?
Nov 26, 2012I had inserted a Land Desktop drawing containing points in to a C3D 2012 drawing. There was a small difference in coordinates. I used Autocad move and rotate to adjust. This was fine because I only needed a visual reference. Now someone wants the information and I need to convert the Aecc points to Civil cogo points.
The problem is that the convertldtpoints command doesn't use the location of the point marker as the coordinates for the converted points. It uses the Northing-Easting stored in the AECC_Point object. Those are the pre-adjustment coordinates.
Civil 3D 2012 SP 2.1
Dell Precision T7400
Xeon CPU 3.16 GHz
Nvidia Quadro FX 4600
12 GB RAM
Win 7 Pro, 64-bit
AutoCad :: Converting Land Desktop AECC Points To Cogo Points
May 17, 2013there is a way to convert land desktop aecc points to cogo points and use the full description?
I do not have access to the ldt files nor to the Descriprion keys file. It would be nice if there was an option to preserve full descriptions when converting (that would be just too simple).
AutoCAD Civil 3D :: Land Desktop Files In 2011
Mar 13, 2012When we try to open/save a file that was started in Land Desktop, we get significant performance slowdowns, lockups, and crashes in Civil 3D 2011. Most of these files only contain simple linework, labels, etc. (no Land Desktop surfaces, alignments, profiles created in project).
We've tested purge, purge regapps, audit, recover, Export to AutoCAD, and AECOBJEXPLODE (which produces errors). WBLOCK is not really an option in this case because we may have to reference multiple projects back to these original Land Desktop files.
AutoCAD Civil 3D :: Land Desktop Files Crash When Opened?
Oct 9, 2013When I try to open a LDD file with C3D, the file locks up and won't open. It appears to happen only when the LDD file has an alignment defined.
View 8 Replies View RelatedAutoCAD Civil 3D :: 2008 Land Desktop Companion Drawing Orientation Label?
Aug 15, 2012Typically at my company we rotate our drawing orientation under the Projects - Drawing Setup - Orientation. Rotate the drawing to a known basis of bearings. Then we label the boundary and the bearings are rotated to match the basis of bearings without having to rotate the drawing in model space. Just reciently my labels havne't been holding the orientation. So when I add a static or dynamic label the bearing reads as though my orientation is due north. BUT, when I loook at the line priperties, the bearing is correct, as it has held the orientation.
View 4 Replies View RelatedAutoCAD Civil 3D :: Why Label Command Doesn't Work In The 2007 Land Desktop
Oct 3, 2013why the label command does not work in the 2007 LandDesktop ...Instead I just get the error "AEC_CIVIL_ NONASSOCAUTOLABEL".
View 1 Replies View RelatedAutoCAD Civil 3D :: Pickets To Points Convert
Aug 4, 2013I have these pickets, and I'm trying convert to points (such as in this video [URL], but then I'm finishing every points have z coordinate "0". I think because Z coordinate is in attribute, but not in block, but don't know how fix it.
[URL]
AutoCAD Civil 3D :: Convert Points To Another Coordinate System?
Apr 22, 2013I have Points in Civil 3D that are in the Washington State South Zone NAD 83 Coordinate System and would like to get these points converted to Washington State North Zone NAD 83 Coordinate System. I am able to convert drawings entities to the new coordinate system using MAPEXPLORER but the points do not go with it.
View 4 Replies View RelatedAutoCAD Civil 3D :: Land XML Reporting 2013
Jan 22, 2013OK, I just did a new install of Civil 3D on a clean machine, were might I find the XML Reporting for 2013 so that I can edit the format and percision of the reports.
View 1 Replies View RelatedAutoCAD Civil 3D :: Unable To Insert Land Xml
Nov 1, 2013 Last week I could import xml files just fine. Now when I go to import a xml I get
"_AeccLandXMLIn Unknown command "AECCLANDXMLIN". Press F1 for help."
AutoCAD Civil 3D :: Exporting Corridor To Land XML
Oct 24, 2012what happens when we try to export corridor to Land XML file? Do we get design cross sections that surveyors can import in the equipment? I need to export my cl alignment with the design cross sections.
View 9 Replies View RelatedAutoCAD Civil 3D :: Feature Lines Export To Land XML?
May 8, 2012I would like to export feature lines out as land xml file. Can this be done in Civil 3D or is there another work around.
View 5 Replies View RelatedAutoCAD Civil 3D :: Sites / Feature Lines / Land XML
Oct 30, 2013I brought a site into a drawing by LandXML which had 35 feature lines in it. How do you get the actual linework of the feature lines to show up in your drawing? It shows them in the site but the linework is not there.
View 1 Replies View RelatedAutoCAD Civil 3D :: Designing Land Fill Expansion Cap
Apr 22, 2013I am fairly new to civil 3d (currently using 2012) and have been tasked with designing a proposed landfill cap. The end goal i am looking to achieve is to dertermin the amount of fill that can fit within a footprint. If approved i would then design a haul road and swales. I understand the basics of grading however i have run in to a few issues while attempting this. Let me describe what i have tried so far.
-Obtained existing contours and created a surface out of this.
-Obtained proposed footprint extents
-Attempted "grade to elevation" using the footprint to grade up to an elevation using a 3:1 slope. Learned this tool does not work as i expected and abandoned this idea
-Attempted "grade to surface" using a 3:1 slope and a top footprint with an assigned elevation.
The final step i believe is creating what i want however the surface is not very "clean". Here is an example of what i mean; [URL]....... Is my feature line not simple enough or is my existing surface perhaps too complex?
AutoCAD Civil 3D :: Land XML Report Bearing Format
Dec 20, 2013I am trying to find where the formatting is for the General Legal Description bearings. I am currently getting an output of NORTH 00° 12' 33" EAST, but would like to eliminate the spaces in the DMS: NORTH 00°12'33" EAST. This is also the case with the delta angle for curves. When I run the Metes and Bounds report, the bearings appear without the spaces. I think that I have changed it before, but I have switched employers since editing the files.
View 2 Replies View RelatedAutoCAD Civil 3D :: Soils And Land Type Organization
Dec 2, 2013When I work on a site I need to identify several different situations and organizing those situations is getting hard, how do you do it?
The land usually has multiple soil types, a max of 4 types A, B, C, D
I also need to track the impervious, grass and tree areas going to an unknown number of outfalls
The impervious area can be broken down into structures, roadway, parking lots, sidewalks and other
Also you need to have this information for your existing conditions and your impervious conditions.
Usually I just delineate everything and hatch them with a layer like C-IMPV-A for proposed impervious soil type A
I have also tried creating parcels to represent the areas delineated, but when you get a couple hundred parcels it gets confusing.
AutoCAD Civil 3D :: Limit Of Rock Cut For A Land Development Project
Mar 23, 2013I need to determine a limit of rock cut for a land development project. I have created surfaces for my Existing Grade and Top of Rock. Is there any way to determine the limit of rock cut within 25 ft of the existing ground, the volume of rock cut, and show the limit of rock cut on my plan view?
I could drop the Existing Grade elevations by 25 feet, but then how would I create a separate Surface from the intersection of the lowered Existing Grade surface and the Top of Rock Surface?
AutoCAD Civil 3D :: How To Find Volume Of Land Cutting Filling At Particular Level
Apr 25, 2012I am trying to find a volume of land cutting filling at particular level?
I import point file in surface 1
How to make surface 2 for particular level ..
AutoCAD Civil 3D :: Drawing Land On Site When Xref Or Insert As Block
Jun 24, 2013I'm using C3D 2013. I received a survey drawing (unknown version) from a third party. I tried both xref'ing and inserting as block into my drawing and it was over 7,100' SW from my site. BUT when I copy from 0,0,0 in his drawing and paste 0,0,0 in my drawing, it lands on my site. If I xref my drawing into his drawing, it lands on his survey information. Why doesn't his drawing land on my site when I xref or insert as block?
View 6 Replies View RelatedAutoCAD Civil 3D :: Export Points To Datacollector And Create Points List
Feb 8, 2013I had to create a boundary map and place points to all corners. How to export these newly created points back into my data collector (Ranger) and also I'm trying to figure out how to print out a points list.
I stumbled on to this thread but I guessing that it's a different CAD year because my modify tab doesn't look like this. URL.....
AutoCAD Civil 3D :: Large Surface - Converting Points To Cogo Points
Mar 5, 2013I have a large surface (over 1.5 million points and 20 000hectares)
I need to get a point file .csv from the TIN to be able to use it in another program.
-so i've extracted the points from my surface, but they are Autocad points.
-next step is to convert them to civil 3d points.
-I can not select them all when converting them or my computer crashes.
-so i select about 25 000 at a time, the converting takes roughly 10 minutes.
and i have over 1.5 million points to do.
how can i speed this up.
will more ram useful?
AutoCAD Civil 3D :: Converting Points To COGO Points Naming?
Oct 9, 2012I have recieved a file with many points and would like to convert them into COGO points in Civil 3D. The problem is; I would like to keep the hole ID's as I convert, I've made a few conversions and lose the hole ID every time (not showing in Name or Description). Is there a seting I am missing to keep these? My aim to to organize the COGO points in different point groups.
View 3 Replies View RelatedAutoCAD Civil 3D :: Designating Points As Control Points
Aug 17, 2012I have a couple points that were part of an import event (data from a previous project) which I want to assign as control points for an incoming traverse, is there any way to assign those as control points? I can't seem to find a way to do that other than perhaps re-importing the specific points as control points and overwriting the existing ones.
View 2 Replies View RelatedAutoCAD Civil 3D :: Moving Points Out Of All Points Group?
Apr 10, 2013I have a project that was started by leaving all the survey data inside the "All Points" group. So, I'm concerned that when I enter my as built survey points, that even if I put them into their own group, that the original surface will still look at them and just rebuild to my asbuilt data, effectively cancel out the purpose of the asbuilt survey. Will this happen?
I want to take the original points and put them into a group of their own, but I don't know if that will affect anything or not? I have several wetlands already designed on that surface with volume calcs already done too.
What should I do?
AutoCad 2D :: Convert Points To Blocks?
Sep 29, 2011i have 3 different cad files for lights, drains and trees and they are all located as points.
There are hundreds of these points and they all look the same, obviously I want to differentiate lights from trees so is there a way to convert these points into unique blocks?
AutoCAD 2010 :: Convert Polylines To Points
May 18, 2012I have a contour set created using polylines and I want to convert this to points. Can I do this in AutoCad 3D Map?
View 3 Replies View RelatedAutoCAD 2010 :: How To Convert Annotation Into Points
May 19, 2012i have an elevation point layer that i'm using in a project and i needed to import it to arcgis for some interpolation.
Problem is, all altimetric points are "B"s instead of being points, and arcgis doesn't recognize them as points. Is there a way of quickly converting them all of them into points?
Take into consideration that we're talking about hundreds, maybe thousands of said "B"s.
AutoCAD Visual LISP / AutoLISP :: Routine To Convert Lines To Points?
Feb 26, 2012Just going over some old stormwater flows but have some other stuff included in the coordinates I have, is their anyway to convert lines to points?
I know a long way but im just seeing if theres a quick lisp routine that can do it for me?
AutoCAD Civil 3D :: 2011 Will Not Start - Goes Right Back To Desktop
Jun 3, 2011I recently got a new computer that has Windows 7 64-bit on it. I immediately installed Civil 3d 2012 on it and it worked great. Some of our projects are in 2012 but some of them are still in 2011. So I exported the license from my old machine and tried to install Civil 3d 2011 on my new machine. I noticed that a couple SQL programs did not install because there was already a newer version on my machine. When it finished installing a tried to open it up and it acts like it is going to start ( I get the pretty Civil 3d Picture in the middle of my screen and the window pops up) but as soon at it starts it just disappears and goes right back to my desktop.
I though that maybe the problem was that I installed 2012 first so I completely uninstalled both of them and tried to reinstall just 2011 and I still have the same problem. I also tried disabling my Virus/Spyware protection software and reinstalling it. Same results.
AutoCAD Civil 3D :: Add New Section Points Or Erase Section Points
Nov 29, 2013When I change a section to static mode, I would like to add new section points or erase section points.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit