I had to create a boundary map and place points to all corners. How to export these newly created points back into my data collector (Ranger) and also I'm trying to figure out how to print out a points list.
I stumbled on to this thread but I guessing that it's a different CAD year because my modify tab doesn't look like this. URL.....
Let me make my question clearer by considering an example as follows, Assume I have points A, B, C and D in a map. Is there any command that can list the distance between any two points out of all points? e.g. distance of A-B, A-C, A-D, B-C, B-D, C-D.
View 1 Replies View RelatedI have been using the "LIST" command to get coordinates of a point. The list can be as long as my monitor is high. I need to copy the coordinates of about 3 000 points to a Microsoft Word file to manipulate with them.
The "LIST" command would show me about 4 points after which i have to press "ENTER" to get the next ones, but this is obviously pointless. How could i get the coordinates of very many points to a text file all at once?
I have a large surface (over 1.5 million points and 20 000hectares)
I need to get a point file .csv from the TIN to be able to use it in another program.
-so i've extracted the points from my surface, but they are Autocad points.
-next step is to convert them to civil 3d points.
-I can not select them all when converting them or my computer crashes.
-so i select about 25 000 at a time, the converting takes roughly 10 minutes.
and i have over 1.5 million points to do.
how can i speed this up.
will more ram useful?
I have recieved a file with many points and would like to convert them into COGO points in Civil 3D. The problem is; I would like to keep the hole ID's as I convert, I've made a few conversions and lose the hole ID every time (not showing in Name or Description). Is there a seting I am missing to keep these? My aim to to organize the COGO points in different point groups.
View 3 Replies View RelatedI have a couple points that were part of an import event (data from a previous project) which I want to assign as control points for an incoming traverse, is there any way to assign those as control points? I can't seem to find a way to do that other than perhaps re-importing the specific points as control points and overwriting the existing ones.
View 2 Replies View RelatedI have a project that was started by leaving all the survey data inside the "All Points" group. So, I'm concerned that when I enter my as built survey points, that even if I put them into their own group, that the original surface will still look at them and just rebuild to my asbuilt data, effectively cancel out the purpose of the asbuilt survey. Will this happen?
I want to take the original points and put them into a group of their own, but I don't know if that will affect anything or not? I have several wetlands already designed on that surface with volume calcs already done too.
What should I do?
Is there an easy way to export Cogo Points with attributes to a text file e.g csv file.
The attached imae shows an example of the Cogo Points I need to export and open in a spreadssheet. I need all the information (not just E,N,Z,D) of the point.
i need to export 7 million points from a tin surface to text file with only NEZ in comma delimited format for Surfer 9 software. right now i have the civil 3d surface. but the export to csv stock reporting tool sucks. why the hell do you open the file and why leave an empty row between data points? so it's not usable.
also i have 12gb ram at work and it can't export surface points to autocad format ran out of memory. this is with surface display showing points and just the "dot" style so it's autocad points after export. i was originally planning on using "dataextraction" command in autocad to export to csv. worked on a small batch of file. so i think may work for the bigger file. but i would never know because i can't even get the points into autocad.
also yeah i would love to simplify the surface but it's so buggy that you asked it to remove 80% of the points it only remove 100k points at most out of 7 million. so not usable.
last resort is i can program something in vb.net but not much motivation on doing so.
I have this attached file.
If I list one of the objects, it is defined as a block. I have repeatedly tried to explode this but to no avail.
My intention is to convert these AutoCAD "points" as points in Civil 3D to process them further. When I use Points>Convert AutoCAD points commands, it returns me a "invalid selection" message.
How do I explode these blocks and convert them to Civil 3D point objects?
I am working in a .dwg that i have previously created cogo point in, but now when i try to created cogo points manually, it goes through the prompts, but will not create the point. P.S I am using Civil 3d 2011
View 2 Replies View RelatedI am trying to utilize Trimble's ability to export Points to an XML file. The XML file contains some additional Attribute data. I have created the new Point UDP's and also Created a new Point File Format. Here lies the Problem, when I go to the Insert Tab in the Ribbon and pick import from XML. It gives me no choices to select a Point File Format? It just imports the file with just PNEZD data only, and not my additional Attributes.
View 7 Replies View RelatedI have 4 points (from "Points from file", I created Points #1, #2, #3 and #$ in the non-linear fashion).
1) I want to create 4 straight lines (connecting Pt#1-Pt#2, P#2-P#3, P#3-Pt#4, P#4-P#1) by using some Commands. What Commands in the Command Line should I use to create these 4 straight lines from these 4 points?
2) I want to create 1 parcel (connecting Pt#1-Pt#2-Pt#3-Pt#4-Pt#1) by using some Commands after "Parcel Creation Tools" => Draw Tangent-Tangent with No Curve is clicked. What Commands should I use in the Command Line to specify these points to form a parcel?
I have a line at a constant grade. I need to create points along this line. The information given is in slope distance and these vary at times.
I've tried the point create methods and they all seem to calculate points at a horizontal distance. How do you enter the slope distance?
I know I can go back to basic Acad methods of divide, changing ucs so horizontal works etc.
wondering if it can be done in the create points commands?
I have collected points across a 500m distance with easting, northing and height values. This line of points is measuring a stepped slope of a field.
I want, if possible, to create a profile (something that looks like a slice of the slope, so that the steps and profile of the slope is clear.
Can this be achieved? Will you be able to guide me through the process?
This is a fantastic option, but I have a problem the whole drawing is rounded to two decimal places.
But when I execute create block from Cogo points he round heights on all points to three decimal places,where the third decimal is 0.
Example height is H =198.36 after H=198.360.
I was wondering if there is a setting somewhere that can be turned on to display the manual points I am creating as I create them instead of having to go back and update the point group before they display in the drawing?
View 1 Replies View RelatedI have the need to put COGO points along the vertices of multiple 3D polylines in a DWG. I know how to do this individually for each 3DPL via the "Points>Create - Miscellaneous > Polyline Vertices - Automatic" or "CREATEPTPLYLNCTRVERTAUTO" command. Need tip on how to do this in a batch format for all the selected 3D PLines in the drawing without having to select each individual 3DPL and having to hit return to enter a description for each individual vertex? I can do without having to add a description and can leave each description blank or enter the same description for each.
I'm Using C3D2013.
I want to create new vertex points in feature line and 3dpol.
I have this:
try
{
if (obj.GetType() == typeof(Autodesk.AutoCAD.DatabaseServices.Polyline3d)) {
Polyline3d p3d = (Polyline3d)trans.GetObject(entRes.ObjectId, OpenMode.ForWrite);
[Code]....
In this code line:
oFtrLn.InsertFeaturePoint(punt, AeccLandFeatureLinePointType.aeccLandFeatureLinePointPI);
always catches the same Exception "the value is not within the expected range" .I have translated it because I get "El valor no está dentro del intervalo esperado". Perhaps is this: " Value does not fall within the expected range.".
I have tried it with different point3d values but always catches Exception.
With pol3d I have similar problem.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
I need to create points with surface elevations along sample lines. The points need to represent the verticies one would see in the section editor. I've attached an image of my section editor for one of my sample lines. I need to create points that represent these 24 verticies along this sample line and do so for the rest of my sample lines as well. Is there an automated process to create these points?
View 1 Replies View RelatedI have an alignment for a natural gas pipeline.
I want to use the 'Create Points at Alignment Geometry' tool in order to label only the PIs. However, when I use the tool it creates two points (one called PI and one called CPI) at each vertex of the alignment. How can I fix this issue and toggle the creation of the various other geometry points?
Is there a way to create a point group of random points within a drawing and adjust the elevations for the points within that group? Some of the points in the group may have been manually created and some may have been imported by way of "Import Events"..
View 3 Replies View RelatedIs there a way to create automatic Point Groups when importing points? Sort of like a Desc Key for layers? I know it probably is impossible but I have to ask.
View 1 Replies View Relatedcreate a quick profile using the Points method?
When I am asked for the Profile Origin the cursor is like a standard Windows Arrow pointer and won't let me select a point for the origin.If I use a polyline for the quick profile all works as expected...
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
The create points tool window doesn't use the Points Creation options I set for Default Elevation and Description, when go to create a bunch of points I have to key these in for each one. I know if I go and set these in the settings tab they will stick, but I would like for the tool window to work like it implies.
(running C3D 2012 sp4, Win7 64bit, 8GB)
I have 4 points/corners (with XYZ-coordinates) of a square shape created in the DWG of my AutoCAD Civil 3D 2013 program. I want to create 2 "triangle-shape" parcels (one parcel connects Points #1-#2-#3-#1 and the other parcel connects Points #1-#4-#3-#1. How can I create these 2 "triangle-shape" Parcels from the 4 points/corners of a squre shape?
View 9 Replies View RelatedWhen I change a section to static mode, I would like to add new section points or erase section points.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
there is a way to convert land desktop aecc points to cogo points and use the full description?
I do not have access to the ldt files nor to the Descriprion keys file. It would be nice if there was an option to preserve full descriptions when converting (that would be just too simple).
What are some techniques to import a list of points in x, y, and z? Many they be separate features or a grouped? (Manual Entry Vs. Batch Entry) (Single Entry Vs. Multple Entry)
View 4 Replies View RelatedI have a data table showing points surrounding a central source.I would like to create a calculation that adds a column in my data table of the points; that shows the distance between each respective point, and the central point.
My knowledge in expression building is limited,I assume I would be using some form of calculation using the geom, and the X and Y locations, however I'm coming up with nada.
How to list the area of a polyline or by points and have the output displayed in acres?
View 6 Replies View Related