AutoCAD Civil 3D :: Soils And Land Type Organization
Dec 2, 2013
When I work on a site I need to identify several different situations and organizing those situations is getting hard, how do you do it?
The land usually has multiple soil types, a max of 4 types A, B, C, D
I also need to track the impervious, grass and tree areas going to an unknown number of outfalls
The impervious area can be broken down into structures, roadway, parking lots, sidewalks and other
Also you need to have this information for your existing conditions and your impervious conditions.
Usually I just delineate everything and hatch them with a layer like C-IMPV-A for proposed impervious soil type A
I have also tried creating parcels to represent the areas delineated, but when you get a couple hundred parcels it gets confusing.
View 2 Replies
ADVERTISEMENT
Nov 18, 2013
I have downloaded the SSURGO file from Web Soil Survey. They are in .shp files, I have imported the spatial files into AutoCad Map 3d 2012. My goal is to create a Topology so that I can detemine the soil type and acres of parcels of land.
When I click on the polygon in my drawing it is a closed polygon with double line or overlapping lines and it does has object data but it is part of the line not a point as I am used to.
View 1 Replies
View Related
Jan 22, 2013
OK, I just did a new install of Civil 3D on a clean machine, were might I find the XML Reporting for 2013 so that I can edit the format and percision of the reports.
View 1 Replies
View Related
Nov 1, 2013
Last week I could import xml files just fine. Now when I go to import a xml I get
"_AeccLandXMLIn Unknown command "AECCLANDXMLIN". Press F1 for help."
View 5 Replies
View Related
Oct 24, 2012
what happens when we try to export corridor to Land XML file? Do we get design cross sections that surveyors can import in the equipment? I need to export my cl alignment with the design cross sections.
View 9 Replies
View Related
Aug 23, 2011
When converting Land Desktop Points to Civil 3D, it doesn't display point labels, descriptions, elevations, or point numbers. How do I correct this?
View 9 Replies
View Related
May 8, 2012
I would like to export feature lines out as land xml file. Can this be done in Civil 3D or is there another work around.
View 5 Replies
View Related
Oct 30, 2013
I brought a site into a drawing by LandXML which had 35 feature lines in it. How do you get the actual linework of the feature lines to show up in your drawing? It shows them in the site but the linework is not there.
View 1 Replies
View Related
Apr 22, 2013
I am fairly new to civil 3d (currently using 2012) and have been tasked with designing a proposed landfill cap. The end goal i am looking to achieve is to dertermin the amount of fill that can fit within a footprint. If approved i would then design a haul road and swales. I understand the basics of grading however i have run in to a few issues while attempting this. Let me describe what i have tried so far.
-Obtained existing contours and created a surface out of this.
-Obtained proposed footprint extents
-Attempted "grade to elevation" using the footprint to grade up to an elevation using a 3:1 slope. Learned this tool does not work as i expected and abandoned this idea
-Attempted "grade to surface" using a 3:1 slope and a top footprint with an assigned elevation.
The final step i believe is creating what i want however the surface is not very "clean". Here is an example of what i mean; [URL]....... Is my feature line not simple enough or is my existing surface perhaps too complex?
View 9 Replies
View Related
Dec 20, 2013
I am trying to find where the formatting is for the General Legal Description bearings. I am currently getting an output of NORTH 00° 12' 33" EAST, but would like to eliminate the spaces in the DMS: NORTH 00°12'33" EAST. This is also the case with the delta angle for curves. When I run the Metes and Bounds report, the bearings appear without the spaces. I think that I have changed it before, but I have switched employers since editing the files.
View 2 Replies
View Related
Mar 13, 2012
When we try to open/save a file that was started in Land Desktop, we get significant performance slowdowns, lockups, and crashes in Civil 3D 2011. Most of these files only contain simple linework, labels, etc. (no Land Desktop surfaces, alignments, profiles created in project).
We've tested purge, purge regapps, audit, recover, Export to AutoCAD, and AECOBJEXPLODE (which produces errors). WBLOCK is not really an option in this case because we may have to reference multiple projects back to these original Land Desktop files.
View 3 Replies
View Related
Oct 9, 2013
When I try to open a LDD file with C3D, the file locks up and won't open. It appears to happen only when the LDD file has an alignment defined.
View 8 Replies
View Related
Mar 23, 2013
I need to determine a limit of rock cut for a land development project. I have created surfaces for my Existing Grade and Top of Rock. Is there any way to determine the limit of rock cut within 25 ft of the existing ground, the volume of rock cut, and show the limit of rock cut on my plan view?
I could drop the Existing Grade elevations by 25 feet, but then how would I create a separate Surface from the intersection of the lowered Existing Grade surface and the Top of Rock Surface?
View 7 Replies
View Related
Apr 25, 2012
I am trying to find a volume of land cutting filling at particular level?
I import point file in surface 1
How to make surface 2 for particular level ..
View 3 Replies
View Related
Nov 26, 2012
I had inserted a Land Desktop drawing containing points in to a C3D 2012 drawing. There was a small difference in coordinates. I used Autocad move and rotate to adjust. This was fine because I only needed a visual reference. Now someone wants the information and I need to convert the Aecc points to Civil cogo points.
The problem is that the convertldtpoints command doesn't use the location of the point marker as the coordinates for the converted points. It uses the Northing-Easting stored in the AECC_Point object. Those are the pre-adjustment coordinates.
Civil 3D 2012 SP 2.1
Dell Precision T7400
Xeon CPU 3.16 GHz
Nvidia Quadro FX 4600
12 GB RAM
Win 7 Pro, 64-bit
View 2 Replies
View Related
Jun 24, 2013
I'm using C3D 2013. I received a survey drawing (unknown version) from a third party. I tried both xref'ing and inserting as block into my drawing and it was over 7,100' SW from my site. BUT when I copy from 0,0,0 in his drawing and paste 0,0,0 in my drawing, it lands on my site. If I xref my drawing into his drawing, it lands on his survey information. Why doesn't his drawing land on my site when I xref or insert as block?
View 6 Replies
View Related
Aug 15, 2012
Typically at my company we rotate our drawing orientation under the Projects - Drawing Setup - Orientation. Rotate the drawing to a known basis of bearings. Then we label the boundary and the bearings are rotated to match the basis of bearings without having to rotate the drawing in model space. Just reciently my labels havne't been holding the orientation. So when I add a static or dynamic label the bearing reads as though my orientation is due north. BUT, when I loook at the line priperties, the bearing is correct, as it has held the orientation.
View 4 Replies
View Related
Oct 3, 2013
why the label command does not work in the 2007 LandDesktop ...Instead I just get the error "AEC_CIVIL_ NONASSOCAUTOLABEL".
View 1 Replies
View Related
Feb 9, 2008
I have a LOT of fonts, and I use CS2.
Is it possible to organize your fonts under different categories (i.e. Sans Serif, Serif, Grunge, Cursive, etc) so that you can easily select them for a particular look?
For example,
While in Photoshop I write out some text and decide that for the application, a font with Serifs would be the best choice. Rather than scan through all the little samples of text in the dialog box, I would like all of the Serif fonts to be in one group, then all the Sans-Serif fonts in another, etc.
Is it possible to arrange fonts into folders as such? I've wondered if I can add folders to the Font directory, but I am unsure of the results and do not want to mess anything up.
Can you make Photoshop look in different folders for fonts? I don't know how to do this.
Other than that one idea I had was to rename all the fonts in the directory and group them through that method, i.e. "Serif_**fontname**" "Cursive_**fontname**" etc.
View 1 Replies
View Related
Oct 26, 2012
Lately I was asked to make organization chart for my assignment. Does Abode Photoshop finish my task? I means that does using this software have many step to do.
View 7 Replies
View Related
Jul 23, 2012
I created a project parameter called "Appears in Browser" as a "Yes/No" type for Views Categories. I created a custom Browser Organization for Views Filtered By "Appears in Browser" equal to "Yes"
This works great except for those views which are neither checked Yes or No... for instance any NEW view! I can get new views to appear by changing the filter to be equal to "None", but then the "Yes" views do not show up.
You would think if I set the filter to "Appears in Browser" NOT Equal to "No" this would solve the problem, but it does not.
I desperately want to change the "AND" logic to "OR" logic so I can have two filters set to "Appears in Browser" equals to "Yes" OR "Appears in Browser" equal to "None".
Two Questions:
1) Where Can I add this comment to a WISHLIST for future releases?
2) Is there any other way to acheive a "Yes" or "None" filter or filter to Show All but "No"
View 3 Replies
View Related
Jul 2, 2012
After a PURGE UNUSED it is impossible to create new LEGEND.
View 8 Replies
View Related
Mar 15, 2013
Elements 11 was just installed on my lap top and is crashing while using organization part of program. No error message.
View 2 Replies
View Related
Dec 30, 2012
Any comparison of the organization & cataloging between Adobe Photoshop Elements and Adobe Lightroom?
I'm only interested in knowing how the photo management aspects of these to programs compare...
View 1 Replies
View Related
Nov 8, 2013
I am quite new with autoCAD and am catching up pretty well but the problem now is this. I need to make a building plan for a land measuring 100 x 75 ft but I do not know how to draw the scale on my work space using autocad 2012.
View 9 Replies
View Related
Dec 16, 2013
Photoshop Elements 6
Windows 7, 64 bit
All Pictures in Folders and Sub folders on hard drive.
New installation of Photoshop Elements 6
I can import all the Picture files but they do not show up in folders. How can I import and keep current organization? Or, must I reorganize?
View 1 Replies
View Related
Mar 12, 2012
I have bearings and distances but I am wondering if using PLIN is the best method to draw parcels in AutoCad Map 2012. I have a layer of the Townships, Ranges and Sections that I hope to align with the drawings. Most of the time it looks okay meaning they line up and for the most are where they are suppose to be but ever so often I have problems.
View 2 Replies
View Related
Nov 6, 2012
I'm trying to bind a site survey produced in Land Autodesk to my drawing, however when I try I get this error message:
'Some objects in specified Xref(s) failed to bind' I've tried purging the survey prior to binding, but have had no success.
View 1 Replies
View Related
Nov 22, 2011
How to connect isohypses to make 3d land view (AutoCAD)
Here is attach of file [URL]....
View 1 Replies
View Related
Feb 8, 2012
I'm currently using Autocad 2012 to design a land layout consisting of contour lines, roads, a restaurant, 2 parking lots, 4 little shops, a common area, and a walking path. The thing is, for the class I need to present my ideas in a better fashion than just looking at a 2D schematic from Autocad. I'm looking for the best program to use to easily construct walls for the shops, have car models in the parking lots, make the grass green, etc, and be able to almost create an animation walking through the site.
View 6 Replies
View Related
Dec 2, 2013
I have a profile with entities.
using (Transaction trans = HostApplicationServices.WorkingDatabase.TransactionManager.StartTransaction()){
Autodesk.Civil.DatabaseServices.Profile perfil = default(Autodesk.Civil.DatabaseServices.Profile);
perfil = trans.GetObject(entRes.ObjectId, OpenMode.ForWrite) as Profile;
foreach(ProfileEntity entity in perfil.Entities)
[Code] .......
or I could save TypeCode in my List.
aB.TypeCode= entity.Constraint2.GetTypeCode, but I don´t have the table of those codes. ¿?
I would like write with "typeof(.....)" and put my own code in my List.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
View 1 Replies
View Related