AutoCAD Civil 3D :: Get Constraint Type
Dec 2, 2013
I have a profile with entities.
using (Transaction trans = HostApplicationServices.WorkingDatabase.TransactionManager.StartTransaction()){
Autodesk.Civil.DatabaseServices.Profile perfil = default(Autodesk.Civil.DatabaseServices.Profile);
perfil = trans.GetObject(entRes.ObjectId, OpenMode.ForWrite) as Profile;
foreach(ProfileEntity entity in perfil.Entities)
[Code] .......
or I could save TypeCode in my List.
aB.TypeCode= entity.Constraint2.GetTypeCode, but I don´t have the table of those codes. ¿?
I would like write with "typeof(.....)" and put my own code in my List.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
View 1 Replies
ADVERTISEMENT
Aug 31, 2012
I would like to determine the Proxy ObjectType returned from Constraint.EntityOne (i.e. If oConst.EntityOne = kWorkPointProxyObject Then ....)
Property EntityOne() As IDispatch**
how IDispatch works.
Dim oAsmDef As AssemblyComponentDefinitionSet oAsmDef = oAsmDoc.ComponentDefinition
Dim oConst As AssemblyConstraint
For Each oConst In oAsmDef.Constraints'Below will print the Enum 67120288 (kEdgeProxyObject) or 67119520 (kFaceProxyObject) if
'it is constrained. It will Err if a Work or Sketch Proxy Object is Constrained Debug.Print oConst.EntityOne Debug.Print oConst.EntityTwo Next
View 2 Replies
View Related
Jul 30, 2012
I am designing a vertical axis wind turbine just for some practice (just started using Inventor) and everything was going smoothly until I tried to "animate" it spinning. First, I set up a work plane that goes through the center of the structure, and then I clicked angle constraint "explicit reference vector." After watching several youtube videos, I figured that I should click on the work plane, click on another reference point, and then click another point that would be orthogonal to those two (right?). Well after I choose the first point, Inventor will only allow me to choose the center axis as the second option (which I think should be the third option).
View 6 Replies
View Related
May 6, 2013
I'd like to have a linetype that is a solid polyline with open circles every so often indicating a proposed field tile line. I'd also like to have the same line filled in circles to indicate existing tile.
How do I go about creating each line?
I'm in 2010 C3D.
View 2 Replies
View Related
Dec 9, 2011
I am trying to create a new line type for water, drain, and sanitary. i want the lines to have letters on them
-----------W-------------W-----------
------------S--------------S-----------
------------D--------------D-----------
View 4 Replies
View Related
Feb 1, 2012
I'm having trouble with the line type dissappearing or showing as Continuous when I print. It also does not appear to be the same size on different lines, even though the type, scale etc. are all the same.
View 9 Replies
View Related
Sep 5, 2013
I'm setting a layout - I choose plan view for my viewport, save the template and .... I have set it again to unspecified.
Civil 3D (2013) how much you have to improve....
View 1 Replies
View Related
Mar 6, 2013
I have a few custom linetypes created for the cut and fill daylight boundary on a grading and corridor. I have it set up to put these lines on different layers than the rest of the grading. I can turn the rest of the grading off and just have my surface created from the grading and these daylight lines on that are linked to the grading. Everything looks good when I go to paperspace to print, except when I actually print the daylight lines do not. They appear in paperspace but not on an actual hard copy. I do not need the grading, I have tried extracting the lines and deleting the grading. This presents another problem. When I extract the lines the come in as a solid line and I cannot get my custom linetype to show despite changing LT scale, etc. How can I make these lines appear in the fashion I want them to.
View 2 Replies
View Related
Mar 22, 2012
where can I get custom line type for asphalt? Made my own with back slashed but they are all the same length and I saw one that looks better with shorter slashed on the ends and longer in the middle.
View 2 Replies
View Related
Sep 20, 2011
drawing a view port with Polygonal option. When completed it defaults to Dash dot line type which can not be changed in the properties dialog. Civil 3D 2012
View 4 Replies
View Related
Jun 28, 2013
I need change type for Alignment with NET API. Alignment has property AlignmentType, but this property is read only!
In COM API Alignment not has this property. And with user interface to make it easy!
View 5 Replies
View Related
Aug 3, 2012
How to make a table from a type of label (ex: a secondary road who is intersect my design road).
I make a lot a labels to define different locations with some texts to understand the type of labels that are containing different stations.
View 9 Replies
View Related
Jun 20, 2013
I am working on a commercial development with multiple large tenants with multiple standards. To begin to verify the preliminary grading is in compliance, I use the slope arrow surface analysis type.
Due to my multiple standards, I find myself changing these values frequently. My question : Is there a way to make the slope arrow the default analysis type when you are in the surface properties dialog box?
I know it is not a major issue, but it is annoying and repetitive, having to go to the list box, and select slope arrow over and over again. One workaround I have considered to avoid this maddening situation is to make two surfaces, with each criteria assigned to the surface properties and simply paste the main surface into each. Then control which is visible based on what I need to look at.
View 1 Replies
View Related
Dec 2, 2013
When I work on a site I need to identify several different situations and organizing those situations is getting hard, how do you do it?
The land usually has multiple soil types, a max of 4 types A, B, C, D
I also need to track the impervious, grass and tree areas going to an unknown number of outfalls
The impervious area can be broken down into structures, roadway, parking lots, sidewalks and other
Also you need to have this information for your existing conditions and your impervious conditions.
Usually I just delineate everything and hatch them with a layer like C-IMPV-A for proposed impervious soil type A
I have also tried creating parcels to represent the areas delineated, but when you get a couple hundred parcels it gets confusing.
View 2 Replies
View Related
Oct 29, 2012
I have been working in Civil 3D 2013 for about two weeks and everything was going smooth until I got a fatal error message while trying to rotate a basic rectangle. When I reloaded AutoCAD Civil 3D my command line displayed the following error message: "AutoCAD menu utilities loaded.; error: bad argument type: input-streamp: nil”. My drawing loaded normally but when I tried to draw a line using L+Enter I got a note saying “Command: L Unknown command "L". Press F1 for help.” Now none of my aliases work and when I go to Express -> Tools -> Command Alias Editor from the menu bar, I get the windows that are on the attatched screen shot. The PGP files wont work and importing aliases gives me the top right box on the attatched image. I have tried adding a Support File Search Path from the options menu and that too has failed.
View 2 Replies
View Related
Apr 25, 2013
I am in the process of creating a .dwt to be used to generate plan & profile sheets. I have attempted to set the viewport type to either plan or profile (depending on the viewport) but it keeps resetting itself to "undefined".
View 1 Replies
View Related
Jul 3, 2013
I have got a drawing with an alignment containing spiral-curve-spiral entities. I need to find what type of spirals are used in these entities - clothoids, cubic parabolas or other. Is there any way, to find it? In panorama and sub-entity editor there is only spiral description without exact type.
View 2 Replies
View Related
Oct 16, 2012
I can't remember how to change a pipe end section type. I have concrete and want a metal one. I right click and went to swap part, but the metal end section is not listed. The block is fine; all I need to do is to change the material type in the callout. I am using the C3D flared end section with modified text in the callout. Where to I go to change the definition?
View 3 Replies
View Related
Apr 16, 2012
Typically when setting up a viewport in paper space I can change the viewport type at the bottom of the properties dialog box. In 2013 the option is available, but it will always snap back to undefined. I'm sure it is a setting somewhere.
View 9 Replies
View Related
Jul 15, 2013
Is there any way to change a Profile Type that has "File" assigned to it to"Layout"?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
View 9 Replies
View Related
Dec 13, 2012
What type of objects can be projected into a profile view? I know that points, feature lines, and multiview blocks can be projected with variable results. I can't even find a simple list within Civil 3D's.
-Civil 3D 2012
Fred
-Civil 3D 2013 sp2
-Windows 7 64-bit
-Intel i7 Dual Core with 2.40 GHz
-8 GB of RAM
-AMD Radeon HD 6770M
-Civil 3D user since 2007
View 9 Replies
View Related
Sep 28, 2009
I want it to be "Angle Right" instead of "Azimuth".
View 6 Replies
View Related
Jan 22, 2013
I was wondering if there exists a library for pipe network parts for items such as a standard type 1 catch basin that I can add to the existing autocad pipe network parts library. Basically I'm trying to find a shortcut so that I don't have to build all of the catch basins that I need.
View 3 Replies
View Related
Feb 27, 2013
Is it possible to define custom Rail Types in Rail Track Layout Utility for AutoCAD® Civil 3D® 2013?
There is only combobox with predefined Rail types 49, 54, 60.
I found: "The rail type defines the standard turnout types (e.g. 49, 54, 60 etc.)or other user defined types "
, also there is mentioned, that "...pre-prepared turnout types that are written in the XML file ara_switch.xml"
I can't find that ara_switch.xml file.
View 2 Replies
View Related
Jul 25, 2012
In my line of work, the constraints are fantastic. I do use them a lot for the design and drafting.But, somehow, they are slightly buggy. I wanted to know if there is something I can do to make them better.The problems are:
1- Sometimes I can't add a constraint that I KNOW will not overconstraint and that CAN be added. This happens for all the constraints types. For example, sometimes I have one big block with the plot plan of the factory and I want to make a constraint of one other smaller block (an equipment, for example). The constraint is a simple coincident. The plotplan has several objects constrained to it (blocks, lines, etc.) but the smaller equipment block has no constraint whatsoever. Why doesn't it work?
View 3 Replies
View Related
Aug 14, 2012
I have an assembly which has components mated to a radial surface, I need to locate the center of a round slot against an axis, I have X Y coordinates, how can I constrain that part to those X Y coordinates?
Attached is a picture of the assembly.
View 3 Replies
View Related
Nov 28, 2011
I am currently creating a chain block to be animated later on. But, I do not know how to constraint it.
I have attached a zip file of the .ipt and .iam
View 2 Replies
View Related
Mar 10, 2010
Maybe I've just been doing it wrong for the last 5 years, but the Angle constraint is obnoxiously unpredictable. When I constrain a part in an assembly with an angle constraint from the assembly origin plane (or anything else), Inventor always has two solutions; a positive and negative.
Is there something I'm missing here, or is just a design flaw we have to live with?
View 9 Replies
View Related
Feb 25, 2013
I am attempting to Constraint a ling to a length. Can I add several lines to the same constraint, if so how would that be done.
View 2 Replies
View Related
Sep 20, 2012
Coincident Constraint to be offset? I'm trying to constrain a table and a MTEXT object together but they are "mating" at their Insertion Points. I cannot successfully "move" these two points, keeping them constrained.
View 2 Replies
View Related
Jun 1, 2012
I am trying to place a tubes cylindrical surface to another tubes cylindrical surface using add constraint. How do I specify which side of the target surface to apply the constraint ?
View 4 Replies
View Related
