After installing and running the Rail Track Layout tool, the only turnouts that are available are European turnouts. Is there a way to get the standard US turnouts?
We have a project that has been upgraded to Revit 2013. When creating railings using the new railing types, top rails and hand rails disappear/are not visible seemingly at random. For instance, when a railing is created that contains railing profiles in the non-continous rails dialog box in addition to a top rail, the top rail and extensions are not visible in plan, but the rails created in the old non-continous dialog are visible.
This seems to occur only in our upgraded file. New projects seem to display the top rails and hand rails consistently.
Also, with railings that contain a "Wall" type extension, the extension return occurs at a 90 degree angle even if it is set to have a fillet. Further, in some instances, regardless of whether the rail is flat or sloped, the end wall extension return will display as two separate rectangles overlapping (i.e. it looks "broken"), instead of a clean, continuous railing. This seems related to the "direction" that the rail sketch line is drawn (a line drawn from the bottom of the screen to the top will have a broken railing, one drawn from the top of the screen to the bottom will not).
I know that scolding the Autodesk software developers isn't going to change anything, but I feel the need to blow off a little steam. The railing and stair "improvements" for this release are really not worth much. It's still much more time consuming (and frustrating) to model these elements, and with poorer results graphically, than it is to simply draw them. It's still not possible to dimension them properly, place balusters where you want them, make multi-level stair towers join properly, get the up/down arrows to display correctly, and a host of other issues. It's incredibly frustrating and baffling that there are so many issues with such a core component of the software's functionality.
So, just installed the Suite Ultimate version and couldn't find anywhere in Civil 3D 2014 some icon/window to use both... Help file and 'What's New' doesn't even mention the new features.
We are currently looking at how to model rail track in Revit to avoid a Bentley solution (Microstation / MX). A piece of track curves left and right in plan and up and down in section whilst at the same time twisting. We can ignore that it is track, effectively all want to do is extrude a shape along a 2 axis curve whilst twisting the shape.
It is possible to use a swept blend to create a twist along one curve in either axis, but not both axes as far as I have worked out. To make this more difficult the swept blend will also only let you sweep along one curve at a time, so if it was snaking in plan on a flat surface each curve would need to be set up and sweep over and over which is not really a suitable solution.
I am using civil 3d 2012 and i want to use rail assembly for my single track rail project. i want to know how can i customize my assembly. As in given defaulf assembly i can keep the width of sub base same on both side of track centerline. But my requirement is to use different widths on left and right side of centerline of track.
I work in Rail Development and I am trying to create an assembly that will automatically generate a rail/tie shape and label Top of Rail Elevations, Track name and number, and offset distance. I have been copying/pasting a block onto each track in every cross section. This takes way too long! I have attached an image of what I want the assembly to look like in the cross section.
Before now, I have been typing in all of that information, when there are 9 tracks and 77 cross sections.
So I created the rail sub assembly everything looks great in sub assembly composer.
Start a new dwg data reference in the rail alignment, Note the rail alignment type is set to rail.
Create an assembly and under the Construction tab for the assembly the Assembly Type is set to Railway. Attach my custom sub assembly to this assembly.
Created a corridor and I get this error: Something wrong with current subassembly: Operation is not valid due to the current state of the object.
So I delete my sub assembly attach the Civil 3D Rail Single sub assembly. Re run corridor and everything works fine.
So I promote the alignment change type to centerline. Delete the Rail Single sub assembly put my rail sub assembly back. Rerun the corridor and everything works.
So then I undo everything up to the point of promoting the alignment.
Opened the base file changed the alignment type to centerline.
When I tried to synchronize the references I ended up a broken reference with the following error. Invalid reference. Synchronization failed
Not good we already have plan sheets cut.
where in sub assembly composer were do I define the sub assembly to be for Rail?
am using Inventor 2012. Is there any way to select two rails when sweeping? One for the x and one for the y. I can only select one rail. If I choose Profile Scaling X & Y, it does not sweep the way I want to.
I have tried to rotate this railing in 3D so that it looks like this photo but I can't. I've tried several different things with the UCS but clearly I don't know what I'm doing. So I'm turning to the CAD community that does. I can draw the hand rail no problem. But the drawing always leaves the finished hand rail in the X,Y plane. I need to rotate it in the Z axis (I think). Here is the orientation I want the railing to look once it's drawn. I need a step by step procedure so I can learn how to do this the correct way for future reference.
We are developing an equation driven 3d spline using VBA.
It generates a 3D spline, guide rail, and tool profile, but we're having trouble figuring out how to do the actual "sweep with guide rail" using the API.
Attached is an .ipt of the shapes our program is generating automatically. The problem is we are having to manually create the sweep after the geometry is created.
How can we automate the sweep with guide rail process?
I'm trying to produce this loft but the rail I really need it to follow won't produce any results. The other ones on the 3d sketch will work just fine but not the regular sketched one. It seemed to work when I made the rail a straight line but I need it to follow the edge of the surface which is a line, tangent to small r3 arc, tangent to line and connected through projective geometry from the original surface sketch.
I edit Sweep1, select path with guide rail, try to select the curve in 3D sketch 2, but don't succeed.
First, it selects both, the path and the guide rail, and when it offers me to select the path alone, i don't know how to call it in english, again it gives a warning.
I'm trying to apply the right constraint in stress analysis environment.
How would I apply the right constraint? And to which face of the wheel or axle should I apply the constraint to get right results.
If I'm applying the sliding connection to the face of the wheel in z direction, the model will stop stress analysis with an error of "not enough constraints"
if I apply the sliding constraint to the inside of the wheel on the surface of the circle, I get the result as attached. I get 0 reaction in the Z direction which is wrong and should be zero reaction in x direction. How do I get it right?
The correct way to me would be a constraint that would only take forces in the -Y direction, same direction as gravity.
The wheel should not have any other reaction than in the Y direction. Hoe do I define that constraint? In my model the wheel are free to rotate on the axle.
I'm attaching both the general arrangement and the reaction report.
I have created an elevation of a railing with stretch and array actions, however I have not been able to figure out how to center the array'd picket on the top rail. I've added a move action to the main picket in order to manually center after the railing has been stretched between the two posts...however I'd love to have this automatically centered.
(I originally thought I could have the main picket stretch at 0.5 (so it would be centered), then array in two directions, however there is no angle option on an array paramater).
NO, I don't have any problem with making a helical hand rail along the circumference of a spiral stairway (or helical stair stringer)!
My only problem is that the method which gives the best visual results (viz. extrude or sweep circle or region along spline) will give a "HEAVY" solid model that HINDERS the performance of AUTOCAD.
Therefore I mostly use the extrusion along a 3D-polyline that gives a a lighter model but less nice visual results (especially when using flatshot for 2D model "representation").
Can I set some system parameters that increase the performance when extrude or sweep along a spline ?
Standard I use a lot of blocks to increase the 3D perfomance of AUTOCAD, this however is not possible when a visual continuous hand rail is preferred.
I am trying to model a forged steel table base so I can create some tooling to reproduce it. See the attached photo of the base. I am able to sweep along my 3D projected sketch path but there is a twist at the center that I believe I need a guide rail to control. I have tried to draw a rail but it fails.
I suspect I am not drawing my guide rail correctly as to create the slight twist. I was considering drawing a shallow helix along the 3d sweep path but not sure that this is the best direction to head next. I have attached the .ipt with the sweep (without guide path being used).
The wheels on the side need to roll inside the guide rail. I can let them roll in each part separately but not in the entire rail.
I already tried with transitional constrains but then inventor says that there are some problems.My project needs to become a sectional gate so there's going te be lots more than just 2 wheels in it..
I'm creating maps and need to create a brush in Photoshop that will draw Rail Road tracks and follow the direction of the mouse or cursor. I'm just looking for two simple lines with cross marks. I need to be able to just brush around in any direction and have the line look like a simple Rail Road graphic following the direction I draw.
I've watched the 2013 new features videos, and I can't select an individual rail in a railing by selecting the railing and then tabbing to select the rail.
I am trying to see if there is a way of distributing equally spaced lines along a curved guideline. Now there is a function to make text follow a guideline and curve in all different angles. What I want to do is the same thing but with strait lines. Is there a way to do it?
Let’s say I am doing a little model railroading and want to draw out my topographic layout first. Now think of a set of winding scale model rail road tracks with wooden rail cross tracks between the metal rail tracks. Now if my actual scale is 1 in = 10 ft and each cross track needs to be exactly 4 ft apart and the winding track has several twist and turns over a 200 in range. Because each twist and turn is made to both accomplish the turning of the track as well as to avoid obstacles, using the radius tool may not always be the best bet. In an ideal world the best way would be to take a strait track and distribute the cross tracks at 4 ft increments and then try to bend the track. However this would cause other problems and throw off the scale. The best way would be to align the perpendicular lines to the curvature of the track. Now if the track had several "S" turns, odd angled curves, or complex reverse turns, it would take forever to space the tracks evenly and cross tracks at equal distances all along the track even when using the radius tool or building in sections and then merging lines.
If there was a way to evenly space lines along a curved guide then I would not need to spend hours setting up radius and drawing lines that need to be deleted or cut short. Equal spaced lines can be accomplished along a straight line using the Align/Distribute function. Though this still has problems when distributing along angles let alone along a curve.
I am trying to somewhat avoid the radius function and lean more towards shaping a compound image set between two parallel lines and one or more perpendicular lines.
I have a utilities file with existing water and FM as shown in picture 1. But when I reference it into my sheet, the text becomes very tiny. Is there a setting for paper space I should change? The dash is correct, just the letters get small, so changing the ltscale in the original drawing blows up the dash also so that won't work.
Windows 7 x 64 Nvidia GeForce GTS 450 8 GB Ram Intel Core i5-2310 @ 2.90 GHz v. F.107.0.0 AutoCAD Civil 3D 2012 SP1
I have a few custom linetypes created for the cut and fill daylight boundary on a grading and corridor. I have it set up to put these lines on different layers than the rest of the grading. I can turn the rest of the grading off and just have my surface created from the grading and these daylight lines on that are linked to the grading. Everything looks good when I go to paperspace to print, except when I actually print the daylight lines do not. They appear in paperspace but not on an actual hard copy. I do not need the grading, I have tried extracting the lines and deleting the grading. This presents another problem. When I extract the lines the come in as a solid line and I cannot get my custom linetype to show despite changing LT scale, etc. How can I make these lines appear in the fashion I want them to.
where can I get custom line type for asphalt? Made my own with back slashed but they are all the same length and I saw one that looks better with shorter slashed on the ends and longer in the middle.
I am laying out a pressure sewer. I have defined an alignment and profile for the route. I want to show the utility crossings (electric, gas, water, etc.) in plan and profile. My thinking is to create a block and snap it to the crossing in plan view, drape it on EG and lower it by the assumed depth and then project the block to the profile view. I have this working. Now I need to label the plan view XING's with station and utility type and label the profile XING's with station, elevation and utility type. I could easily do this with station and profile labels, but as the desgin evolves, the alignment is subject to change and the crossings will need to be moved and updated. It would be nice to have the labels and symbols integrated into a single entity that updates when moved to the new location. Is there a way to do this with styles?
I've got a project that we made some changes to several of our Civil 3D styles. I'm trying to use the Manage/Import Civil 3D styles utility to update my template. It's not working. When the dialog comes up, it shows me what styles are new with a green plus sign next to it. It does not show me the items that are in conflict (changed). Once I process it, the new style does get added to my template but the modified styles did not come over.
I have a bit of a problem with Autocad map 3d 2012. When i try to insert a scale bar or a north arrow or any other carthographic element i simply can't find the layout elements that are supposed to be in layout tools tab. I've done a lot of research online and can't come up with anything.
I want to add a few new scales in layout. The new scales are: 4"=1'-0" up to 5-3/4"=1'-0" in 1/4" increments. Unfortunately when I add the scales in scale list edit while I'm in Layout, my drawing doesn't scale to any of the new scales.
