AutoCAD Civil 3D :: Custom Line Type With Grading?
Mar 6, 2013
I have a few custom linetypes created for the cut and fill daylight boundary on a grading and corridor. I have it set up to put these lines on different layers than the rest of the grading. I can turn the rest of the grading off and just have my surface created from the grading and these daylight lines on that are linked to the grading. Everything looks good when I go to paperspace to print, except when I actually print the daylight lines do not. They appear in paperspace but not on an actual hard copy. I do not need the grading, I have tried extracting the lines and deleting the grading. This presents another problem. When I extract the lines the come in as a solid line and I cannot get my custom linetype to show despite changing LT scale, etc. How can I make these lines appear in the fashion I want them to.
View 2 Replies
ADVERTISEMENT
Dec 24, 2013
"An infill grading has no criteria applied to it. Any area bounded by feature lines or lot lines that is not already a grading can be converted to an infill grading."
So given an area enclosed by a feature line, an infill grading can be created. Using the same features line, an feature line grading can also be created. what is the difference between these two surfaces? They both have no criteria applied to them.
View 9 Replies
View Related
Mar 22, 2012
where can I get custom line type for asphalt? Made my own with back slashed but they are all the same length and I saw one that looks better with shorter slashed on the ends and longer in the middle.
View 2 Replies
View Related
Aug 24, 2012
I have feature line with elevations that represents bottom of ditch and want to go UP 3:1 slope. also i have edge of road feature line that is higher than ditch and want to go 2% down until it hits side of the ditch that is 3:1. Any easiest way in civil 3d to create intersection line between ditch bottom going up 3:1 and edge of road going down 2%?
View 2 Replies
View Related
Jun 14, 2012
I created some new custom line types using express tool featute in autocad and I saved it with a .lin extension. It is only available in that drawing itself. How I canget those line type in all my new drawings.
I tired to edit the default linetype file even it doesnot appear in the linetype manger windo.
*IRRIGATION,IRRIGATION LINE
A,1,-.066042,["IRR",Standard,y=-.104589,s=.25],-.493243,1
*SEWARAGE,SEWARAGE LINE
A,1,-.031293,["SEW",Standard,y=-.104589,s=.25],-.651197,1
View 4 Replies
View Related
Jan 9, 2012
I want to make custom line type in auto cad 2012 . Any lisp or external utility software or with auto cad without any application
for example
___x_______x____x -------AFRAZ---------afraz----------
-----r----------r---------r-------- -------0---------0----0
View 6 Replies
View Related
Aug 2, 2012
I have an existing surface with a steep slope and a feature line for the edge of a proposed walkway. I need a buffer of 25m on either side of the walkway but offsetting doesn't take the grade of the slope into account. How do I grade down the hill from the feature line at 25m to match to the existing surface?
View 3 Replies
View Related
Oct 10, 2012
why I would get gaps in my grading from a single feature line? The feature line is at the same elevation all the way around and I am trying to grade to my existing surface at a 1:1 slope. No matter what I do it continues to leave out portions of the grading. I have attached a 3d image showing what's going on.
View 1 Replies
View Related
Feb 22, 2013
I have grading style set up to create a cut/fill boundary and the same thing for my corridor. I made surfaces from my grading and corridor and no longer need them. I need to keep the cut/fill lines for my design. How can I extract these lines from these objects? I tried keeping the grading/corridor on one layer and lines I wish to use on another so I can turn pieces of the grading off. However, it will not print the cut/fill boundary without printing all the feature lines created from a grading.
View 1 Replies
View Related
Aug 22, 2012
I'm working on crane pads for a windfarm development and have run into an issue that has never happened in the other 60 or so ones I've done previously.
I have a polyline (elevation added in via Properties) that I want to convert to a feature line for use in grading but when I try to convert I get the message below
When I check the properties and do a LIST the list reports a negative elevation.
View 3 Replies
View Related
Aug 2, 2012
How can I create a line type for a PID software signal using a dash line and a filled in circle dash line? I have tried to use the donut feature as a shape file and a filled in circle as a shape file to define my line and neither has worked. what I am trying to create for a line type.
View 3 Replies
View Related
May 14, 2012
MEP 2013
I have a three point arc, and the custom line type has text that is not only inverted, its backwards.
View 4 Replies
View Related
Jul 19, 2012
How do I create a custome line type with alternating text as description like this:
-------- - e -------- - (oh) -------- -------- e
View 6 Replies
View Related
Dec 12, 2013
When we apply surface projection gradings to feature lines, we get locked vertices on the feature line wherever the grading transitions from cut to fill. In turn these vertices create segments in the feature line which influence any labels applied to the line. I don't want a bazillion segment labels on my FL. I only want segment labels between the physical vertices and elevation points. Is there a workaround or is an enhancement request in order?
View 9 Replies
View Related
Sep 4, 2013
Is there away to link a i.e. (a stoop to a finish flood elev)? So that, if I were to raise the finish floor, the stoop would move also. I understand I could possible to a create grading feature line for a stoop, but what happens if the stoop would be irregular shapped and not a rectangle?
View 5 Replies
View Related
May 6, 2013
I'd like to have a linetype that is a solid polyline with open circles every so often indicating a proposed field tile line. I'd also like to have the same line filled in circles to indicate existing tile.
How do I go about creating each line?
I'm in 2010 C3D.
View 2 Replies
View Related
Feb 1, 2012
I'm having trouble with the line type dissappearing or showing as Continuous when I print. It also does not appear to be the same size on different lines, even though the type, scale etc. are all the same.
View 9 Replies
View Related
Sep 20, 2011
drawing a view port with Polygonal option. When completed it defaults to Dash dot line type which can not be changed in the properties dialog. Civil 3D 2012
View 4 Replies
View Related
Aug 20, 2013
I am trying to figure out a way, or a best practice workflow to get my custom linetypes with shapes to begin and end with a shape.
View 4 Replies
View Related
Mar 7, 2013
i have line types i created for telco and electric...basically a letter T within lines and a letter E within lines. they look just fine in one drawing but now i'm in another drawing started by someone else and i need to use them but the letters are tiny and off center.
View 9 Replies
View Related
Feb 27, 2013
Is it possible to define custom Rail Types in Rail Track Layout Utility for AutoCAD® Civil 3D® 2013?
There is only combobox with predefined Rail types 49, 54, 60.
I found: "The rail type defines the standard turnout types (e.g. 49, 54, 60 etc.)or other user defined types "
, also there is mentioned, that "...pre-prepared turnout types that are written in the XML file ara_switch.xml"
I can't find that ara_switch.xml file.
View 2 Replies
View Related
Mar 8, 2012
How to change the Color, line type and Line weight for the Line using .Net.
View 9 Replies
View Related
May 9, 2012
Is there an easy way to raise an entire site by 1.0 foot and have the grading hit the previous targeted surface? The only way I have found is to grab all the feature lines and raise them up by the required amount, but by doing that, the grading bogs down my system and it crashes, plus, I have grading attached to 3dpoly's and not necessarily all feature lines.
View 1 Replies
View Related
Apr 25, 2013
I am drawing a pond levy. I draw the outline of the top of the fill, set that at the elevation I want, then grade it down to the existing surface on a 6:1. The grading works perfectly. The outline of the fill's footprint shows up just fine around the back of the fill, but the toe line doesn't show up all along the front side of the fill, but I still get the slope lines projecting down in the front.
View 8 Replies
View Related
Mar 6, 2012
I want to cut a channel through a existing surface; bottom width: 5 feet; at elevation 1950 and side slope 1:1 (45deg) up to existing ground.
What I am doing right now is create a feature lines 5 feet wide, at el 1950 and use grading tool to project it to existing ground with side slope at 1:1. What i am doing is correct?
View 6 Replies
View Related
Oct 16, 2013
I am working with Civil 3D 2014, I played with 2009 back in 2008 and before that it was Land desktop. I don't know if I am not following a standard workflow.
Build the EG from contours.Layout the CL for the ROW and convert to a horizontal alignments.Create the profiles.Design the vertical alignment in the profile.Create the assemblies for the different types of road sections.Full profile, pavement width assembly, the curb return assembly, the daylight left / right, 1/2 side left / right, and pavement width left / right.Build the corridor, set the target surface as EG or FG, depending on where the section of the corridor is located. (At the edge of the property to EG, then after the first building pad to FG)This is where I have a thought something is wrong. If I am grading the entire site, why would I have the ROW grade to the EG, when I will need the surface to grade from the ROW to the closest building pads?Create the intersections, using the different types of assemblies, per the ROW sections.Create feature lines and use elevation editor to set all the elevations around the pad.Using the Grading creation tool, grade to surface, using a 2:1 side slope. Then adding an infill to the pad.
I keep having the file crash after grading about 10 lots. I recover and it works find, but then the file runs very slow, and will crash. I haven't taken any classes in Civil 3d, and am looking for one in my area.
I am use to creating the vertical surface then creating points along the CL, TBC, FL, BOW then creating break lines along the points. Then create a break line for the pads, and build the FG contours from these break lines.
View 4 Replies
View Related
Aug 8, 2012
Say I have a grading that runs north south and goes down 2%, up 2% and so on waffling along. Is it a poor practice to trace the side edge of the grading (in the same site) to add another grading to pitch east west?
View 4 Replies
View Related
Mar 4, 2013
I have a building pad where I created a grading of 5:1 to existing grade. I want to change one side to 20:1. How do I go about transitioning the 5:1 to the 20:1. I create the 20:1 and the contours just dead end into the 5:1 grading area
View 1 Replies
View Related
Dec 31, 2013
I tried to work with grading but it didn't work,
1 - The square helicopter pad is flat and grading with 2:1 fill, 1:1 cut.
2- The second FL is 2% slope down and grading with 2:1 fill, 1:1 cut.
3- The third FL is slope down to meet the existing road, both sides will same cut and fill.
View 3 Replies
View Related
Dec 30, 2013
I am creating a helicopter pad, with cut slope 1:1 and fill 2:1. But when i created a transition between the pad and existing road, i don't know how to. I have added a feature lines and make a separate grading but somehow it didn't work.
I have attached here the dwg file (C3D 2014) .
View 2 Replies
View Related
Jul 9, 2013
I made this custom hidden line, here is the defiinition:
*SCADA_FO_HL, - - - -SCADA-FO- - - -SCADA-FO- - - -SCADA-FO- - - -SCADA-FO- - - -SCADA-FO- - - -SCADA-FO- -
A,0.2,-0.4,0.2,-0.4,0.2,-0.4,0.2,-0.4,0.2,-0.4,0.2,["SCADA-FO",STANDARD,S=.375,U=0.0,X=1.0,Y=-.1],-5
It leaves a continuous line at the beginning and end of the line. Is there a way to get rid of that?
View 9 Replies
View Related
