AutoCad :: Inverted Text In Custom Line Type
May 14, 2012MEP 2013
I have a three point arc, and the custom line type has text that is not only inverted, its backwards.
ADVERTISEMENT
AutoCad 2D :: Custom Line Type With Alternating Text?
Jul 19, 2012How do I create a custome line type with alternating text as description like this:
-------- - e -------- - (oh) -------- -------- e
AutoCAD 2010 :: Custom Line Types Will Not Appear On Line Type Manager
Jun 14, 2012I created some new custom line types using express tool featute in autocad and I saved it with a .lin extension. It is only available in that drawing itself. How I canget those line type in all my new drawings.
I tired to edit the default linetype file even it doesnot appear in the linetype manger windo.
*IRRIGATION,IRRIGATION LINE
A,1,-.066042,["IRR",Standard,y=-.104589,s=.25],-.493243,1
*SEWARAGE,SEWARAGE LINE
A,1,-.031293,["SEW",Standard,y=-.104589,s=.25],-.651197,1
AutoCad :: How To Create Custom Line Type
Jan 9, 2012I want to make custom line type in auto cad 2012 . Any lisp or external utility software or with auto cad without any application
for example
___x_______x____x -------AFRAZ---------afraz----------
-----r----------r---------r-------- -------0---------0----0
AutoCAD Civil 3D :: Custom Line Type With Grading?
Mar 6, 2013I have a few custom linetypes created for the cut and fill daylight boundary on a grading and corridor. I have it set up to put these lines on different layers than the rest of the grading. I can turn the rest of the grading off and just have my surface created from the grading and these daylight lines on that are linked to the grading. Everything looks good when I go to paperspace to print, except when I actually print the daylight lines do not. They appear in paperspace but not on an actual hard copy. I do not need the grading, I have tried extracting the lines and deleting the grading. This presents another problem. When I extract the lines the come in as a solid line and I cannot get my custom linetype to show despite changing LT scale, etc. How can I make these lines appear in the fashion I want them to.
View 2 Replies View RelatedAutoCAD Civil 3D :: Get Custom Line Type For Asphalt?
Mar 22, 2012where can I get custom line type for asphalt? Made my own with back slashed but they are all the same length and I saw one that looks better with shorter slashed on the ends and longer in the middle.
View 2 Replies View RelatedAutoCAD 2010 :: Create A Custom Line Type
Aug 2, 2012How can I create a line type for a PID software signal using a dash line and a filled in circle dash line? I have tried to use the donut feature as a shape file and a filled in circle as a shape file to define my line and neither has worked. what I am trying to create for a line type.
View 3 Replies View RelatedAutoCAD Inventor :: ILogic Changes Custom IProperties Type From Number To Text
Nov 2, 2011I am using ilogic in Inventor 2011 to update my iproperties when I save a .dwg file. I am having problems with some custom iProperties I have created that are of the type 'number' and are initially set to 0 (zero). After the iLogic rule has run and the user has entered a numeric value the type of the custom iproperty has changed to 'text'.
The ilogic code I am using is:
If iProperties.Value("Custom", "Nominal ID") = 0 Then
iProperties.Value("Custom", "Nominal ID") = InputBox("Enter The Nominal ID (Enter 0 if no value is available)", "Nominal ID", 0)
Custom_iProp_Nom_ID = iProperties.Value("Custom", "Nominal ID")
End If
I am using Vault 2011 and would like to map this property to a numeric property so I can perform <= and >= searches.
AutoCad :: Change The Line Type Text Style
Mar 18, 2012How do I edit line types? whenever I copy this particular existing line type into the other drawing the text style changes. There is no way of editing it when I go to the line's properties. I want to change the line type's Text style.
View 2 Replies View RelatedAutoCad :: Create Custom Line Types That Have Specific TEXT In It?
Mar 22, 2011I’ve got some questions about custom line types:
1.How do I create Custom Line types that have specific TEXT in it? Like -----L-I-N-E-----
2.Then How do I load that Custom Line type every time I open a new CAD File Dwg.?
Photoshop :: Convert Line Of Type Into Text Box
Jun 9, 2009way to quickly "convert" a line of text, created by just clicking with the text tool, and typing, into a text block? Other than copy and pasting the text in to a new, drawn out text box?
View 2 Replies View RelatedIllustrator :: Type Quickly Numbers Separated By A Space On Text Line?
May 31, 2013For example from 1 to 100 or more like this 1 2 3 4 5 ..... 101 102 103 and so on.
I need this to end up in Illustrator but I also have the office programs Word, Excel, Access but I'm not advanced user there.
Photoshop Elements :: When Select Text Layer And Invert It (black To White) The Whole Picture Gets Inverted
Oct 11, 2013when i select a text message an invert it, the whole picture gets inverted - waht am I doing wrong?
View 2 Replies View RelatedAutoCAD .NET :: Changing Color / Line Type And Line Weight
Mar 8, 2012How to change the Color, line type and Line weight for the Line using .Net.
View 9 Replies View RelatedAutoCAD LT :: Continuous Line At Beginning And End Of Custom Hidden Line
Jul 9, 2013I made this custom hidden line, here is the defiinition:
*SCADA_FO_HL, - - - -SCADA-FO- - - -SCADA-FO- - - -SCADA-FO- - - -SCADA-FO- - - -SCADA-FO- - - -SCADA-FO- -
A,0.2,-0.4,0.2,-0.4,0.2,-0.4,0.2,-0.4,0.2,-0.4,0.2,["SCADA-FO",STANDARD,S=.375,U=0.0,X=1.0,Y=-.1],-5
It leaves a continuous line at the beginning and end of the line. Is there a way to get rid of that?
AutoCAD 2010 :: Make Line Boundary Around Multi-line Text Region Corresponding To Text Mask?
Apr 27, 2010I need to do it quickly with many text regions. How to make line boundary around multi-line text region corresponding to text mask?
View 9 Replies View RelatedPhotoshop :: Existing Type Layer Replaced By Text With Other Type Layer Text Upon Changing Properties?
Jun 6, 2012I have a type layer with some text in it (a headline, let's say). I click on the layer, I click on the Character Panel, and first thing I see is the color in the Panel is not the color of the font in the layer.
I then click on any Panel property, and the text in this layer is replaced by text from another layer in my document ( a paragraph layer, let's say), but the color is not the same as the layer the text came from.
AutoCAD LT :: Convert Single Line Text To Multi Line Text
Oct 7, 2011I need to convert single-line text into multi-line text (AutoCAD LT 2009). Will this version allow you to do so?
View 2 Replies View RelatedAutoCAD Architecture :: Single Line Text To Multi Line Text?
Dec 14, 2011I know that there was a command that would convert single line text to multi-line text but I can not find it. It use to be tt2mt or something like that.
I can not find this command in the help either. Did they get rid of this command like zoom center?
how to take multiple single line text and add them together into one multi-line text?
AutoCAD Inventor :: Adding Custom Fastener Type To Clearance XLS File
Jan 24, 2013I added a new "Standard" and "Fastener Type" to the Clearance.xls file for my Inventor 2013. This was done in an effort to create a standard set of dowel hole sizes in our design department. So far it is working, however I have a few improvements I need implementing.
Changing the "Fit" name from "Close/Normal/Loose" to "Press/Nominal/Slip" to make it more user friendly in the hole wizard.DeterminE how to create a custom hole callout in .idw drawings for this new hole type. I would like to use the Hole Callout feature and have it automatically place our specific hole information/text for the machine shop to create the hole.
Ex..
Drill and ream for 1/4" Dowel hole
Press Fit
.2495 +0 -.0005
I have attached the clearance.xls file we modified to get this new fastener type to show up in our hole wizard.
AutoCAD Inventor :: Custom Feature Control Frame Type Annotation?
Nov 4, 2013I'm looking to do sort of an adaptive annotation thorugh vb.net.
Essentially i'd like it start with a leader and instead of your normal text dial that appears, you get a box to punch in values in a grid. 5 columns across, as many as two rows.
The idea being if i punch in 1, 2, 3, 4, 5, 6 in the first six boxes all 5 in the first row appear with boxes around each number and then only the 6 has aa box around it on row 2.
I can see it as a table 5x2, and the format option being if the cell has text, the border type is outline. Although i don't think those options exist for inventor.
AutoCAD LT :: Custom Text For Custom Buttons
Dec 18, 2012how to place a 2 line text under a custom button.I tried to mimic some of the std button but it didn't work.
Attachment 1 is the std Tool Palette and User Interface buttons in the Manage Panels.
You can notice that the name is User Interface on the left and UserInterface on the right.
Attachment 2 is my button, on the left I CANNOT edit the name and on the right any changes automatically edit the left name.
At the end I would like my button the appears with one line: Extract and under Maint.
AutoCAD Civil 3D :: Add New Line Type?
May 6, 2013I'd like to have a linetype that is a solid polyline with open circles every so often indicating a proposed field tile line. I'd also like to have the same line filled in circles to indicate existing tile.
How do I go about creating each line?
I'm in 2010 C3D.
AutoCAD VB :: Line Type Creating?
Oct 20, 2011How can create in vba with line type ?
View 4 Replies View RelatedAutoCad 2D :: How To Create Line Type
Nov 17, 2011I want to create my choice line type so any lisp to create line type ok.
View 1 Replies View RelatedAutoCAD LT :: Creating Line Type
Jul 12, 2012how do you put a “>”. I’m trying to make a linetype that looks like -> -> -> i know 2,(but i don’t know what goes here),-2
View 7 Replies View RelatedAutoCad :: How To Create Line Type
Jan 12, 2012how can i create this line type which attached?
View 4 Replies View RelatedAutoCAD 2013 :: Line Type With Two Colors
Aug 6, 2013I need to represent some lines, in model space, that alternate in color, yellow/red, that are "scalable" with respect to different scale view ports in paperspace.
my initial idea was to use two lines, each in which the dash and space between were the same distance, then just offset the yellow/red lines enough for each to fill the others gaps. But, wondering if it was possible to represent that in a single linetype?
AutoCAD Architecture :: Out Line Of Wall Type
Mar 30, 2012My boss wants me to make the most outside line of a walltype to be the heaviest pen. If I go to the properties of the wall and changethe boundary it changes the boundary of the item in the wall, each boundary independentfrom the other. Such as a wall made of the following: BRICK, AIR SPACE, SHEATHING,STUD AND GYPSUM BOARD. In this wall theexterior face of the brick and gypsum board need to be heavy.
View 4 Replies View RelatedAutoCAD 2010 :: Creating A Line Type
Oct 23, 2012I am trying to create a new linetype. It is a simple linetype, made up of a continuous chain of capsules that I've attached here. I understand that linetypes require shape files and line definition files. However, AutoCAD isn't even telling me how to create the shape file(s) I need to begin making the linetype.
The capsule is .12 units long at its widest, and will need to connect end-to-end.
AutoCAD LT :: Changing Line Type Toolbars
May 17, 2012For years we've had a line type change toolbar that worked just fine. This years update may have changed something that the old macro is missing or doesn't need anymore because none of the commands work anymore. One of the macros reads:
^C^Cselect chprop;previous;;ltype;dashed;ltscale;4;;