AutoCAD Inventor :: ILogic Changes Custom IProperties Type From Number To Text
Nov 2, 2011
I am using ilogic in Inventor 2011 to update my iproperties when I save a .dwg file. I am having problems with some custom iProperties I have created that are of the type 'number' and are initially set to 0 (zero). After the iLogic rule has run and the user has entered a numeric value the type of the custom iproperty has changed to 'text'.
The ilogic code I am using is:
If iProperties.Value("Custom", "Nominal ID") = 0 Then
iProperties.Value("Custom", "Nominal ID") = InputBox("Enter The Nominal ID (Enter 0 if no value is available)", "Nominal ID", 0)
Custom_iProp_Nom_ID = iProperties.Value("Custom", "Nominal ID")
End If
I am using Vault 2011 and would like to map this property to a numeric property so I can perform <= and >= searches.
View 2 Replies
ADVERTISEMENT
Sep 19, 2013
I was looking for some iLogic Code for Inventor 2013 that would cycle through all the parts in an assembly grabbing the quantity of each part and setting it equal to the custom property "Qty" of each part.
Having a little trouble creating the for each loop and setting reference to each part without referencing each part by specific name.
View 6 Replies
View Related
Nov 2, 2010
Is it possible to automatically add custom iproperties using iLogic?
I have a rule thats adds text to a propery, but when I run the rule in an old partfile i get the error:
"Can't find a property named DrawingNo"
Is there something like:
"Create iProperties.Value("Custom", "DrawingNo")"?
View 3 Replies
View Related
Oct 26, 2012
I have a form that is loading automatically in my part model. where i write the part number, description, project and custom titles.
my questions are:
1 - when i write the part number i would like then when i click apply it opens the save box with the same part number.
2 - it's possible to check-in the file during the saving and keeping the file checkout?
3 - i would like that some of the properties would be transfer to the drawing, like the description and the project (this two are from the part properties.
4 - transfer also for the drawing the custom titles to the custom i properties of the drawing as pre fill in.
View 1 Replies
View Related
Aug 25, 2012
Any way to use iLogic to create custom iProperties from the cells in an Excel spreadsheet (both text and numbers) for a .dwg template. The only thing even close has been a user who already knew how to do it and was having a different problem. I am using Inventor 2012 and Excel 2003 and have very little experience with VB. I currently have a family of assemblies, consisting of two parts linked to an Excel spreadsheet to control the various parameters for each variation of the assembly.
I need creating an iLogic rule that will:
Go to a specific tab (I have four different tabs/worksheets) in an Excel spreadsheet.
Make a specfic row of that worksheet the current row based on the part number used to generate the models of the assembly shown in a .dwg.
Use the contents of a cell in that row (text or numeric or a combination of both) to generate a custom iProperty for the .dwg template.
Use the custom iProperties to fill in the title block of the template.
View 4 Replies
View Related
Oct 31, 2013
I have a part number that i want to defined in custom properties.
Then would it be possible to call it out in Ilogic? that way in any drawing doesn't matter where the part number will always be the same for that part when i balloon and the same in the BOM.
View 4 Replies
View Related
Sep 30, 2013
I'm trying to figure out how to create an iLogic rule that would create a Custom iProperties and put in what version of Inventor the file was last updated with.
View 8 Replies
View Related
Nov 21, 2012
I am trying to export a user parameter that is a text string to a custom I property. I am able to export other parameters to custom properties that are numarical values. I export check box is missing on the text user parameter.
Is there a way to acomplish this with I-logic?
View 5 Replies
View Related
Oct 1, 2013
Im linking a prompted entry in a sketch symbol to a selection from the user in an array. The code works perfectly.
The array displays the number of sheets there are in the document, the user selects the correct one & the sheet number is displayed in the prompted entry. I need to add "SHT" before the number though in the code but I cant get it to work.
I dont want to add a text line into the symbol saying "sht"
Dim oApp As Application: oApp = ThisApplication
Dim oDoc As DrawingDocument: oDoc = oApp.ActiveDocument
Dim oSheet As Sheet: oSheet = oDoc.ActiveSheet
'This uses a sketch symbol with the name "'View On' View Label"
Dim oSymDef As SketchedSymbolDefinition: oSymDef = oDoc.SketchedSymbolDefinitions.Item("'View On' View Label")
'This is the selected view
Dim oView As DrawingView: oView = ThisApplication.CommandManager.Pick(SelectionFilterEnum.kDrawingViewFilter,"Select View To Place Symbol:")
'This takes the label items of the selected view
'And adds it To an array that will link To the prompted entry
Dim sPromptStrings(2) As String
sPromptStrings(0) = oView.Name
sPromptStrings(1) = oView.ScaleString
oDoc = ThisApplication.ActiveDocument
Dim sSheet As Sheet
'create sheet number list
Dim oSheetList As New ArrayList
i = 0
s = "-"
For Each sSheet In oDoc.Sheets
i = i +1
oSheetList.add(i)
Next
oSheetList.add(s)
'get user input
mySheet = (InputListBox("View taken form sheet number.", oSheetList, oSheetList(0), "Sheet Number Ref.", "Sheet Numbers"))
sPromptStrings(2) = mySheet
'This is the position for the sketched symbol under the selected view'
Dim oPosition As Point2d: oPosition = oView.Center
oPosition.y = oPosition.y - (oView.Height / 2 + 2.5)
'This inserts the sketched symbol and fills in the prompted entry.
Dim oSymbol As SketchedSymbol: oSymbol = oSheet.SketchedSymbols.Add(oSymDef, oPosition, , ,sPromptStrings)
View 2 Replies
View Related
Oct 26, 2012
I had wanted to find a way to engrave/emboss the part number on a part model and have it be parametrically tied to the part number iProperty. Since it doesn't appear that I can create a text box and insert the iProperty directly, here's what I did to work around this. (I setup my part templates to have this out of the box....)
1. Within, the IPT file, add a user text parameter called "PartNo" and set its initial value to any text value.
2. Create your sketch for your text to be engraved. Insert the User parameter you just created.
3. Create the engraving/embossing for your text.
4. Create the following iLogic rule:
' Requires a User Text Parameter called "PartNo" prior to running' Set the appropriate event trigger to tasteIf Parameter("PartNo") <> iProperties.Value("Project", "Part Number") ThenParameter("PartNo") = iProperties.Value("Project", "Part Number")InventorVb.DocumentUpdate()End If
5. I set this rule to fire using the "iProperty Change" event trigger. So if the iProperty is set or changed, your text will update. Obviously, you can set this to run with whatever trigger you like.
Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1
View 2 Replies
View Related
Jun 11, 2012
In the I properties project tab I would like to change the "Stock Number" name to "A.R.M.-PN:". I need to reference 2 part numbers in my IPT I properties. This will then show up on the Parts List as a column which I can add. Or I would like to add a new dialog box to the "Project Tab". Is there a easy way to do this in 2011 Inventor Professional?
View 5 Replies
View Related
Feb 26, 2013
Is there a api to read part number value in properties "Project Tab" for a drawing document?
View 2 Replies
View Related
Nov 11, 2013
I would like to copy and paste all iproperties from one part to another, without retyping it all.
What i was thinking about is:
1. Exporting all iproperties to .txt
2. Run a import .txt rule to iproperties.
Is it possible? If so, How could i accomplish a task such as this?
Privacy warning: Since I live in a country that has traded liberty for the illusion of security, all of your posts to me are being monitored and saved by the United States Government.
View 1 Replies
View Related
Oct 18, 2013
I am sure this is extremely simple to do but I am missing something. I am wanting to set the Description of a part in the Iproperties using values from the parameters. For instance, if the part has a length value of 10 and a width value of 5 I want the Description to say: 10 x 5 Floor Sheet
I cannot figure out how to extract the parameter values and place them into the iproperties. Here is what I have tried: iProperties.Value("Project", "Description")=" =<Length> x <Width> Floor Sheet"... This gives me the following result in my description: x Floor Sheet
View 4 Replies
View Related
Jun 1, 2011
I wish to set the properties of an assembly using i Logic. I have the values of the properties in a part that is in the assembly. I wish to pass those values from the part to the assemblies i properties. I tried using the following code, but it gives an error saying it can not find the document "MyAssy.iam"
iProperties.Value("MyAssy.iam", ThisDoc.Path, "Part Number")=AssyNo
I'm not even sure that this is the way to do, but it's the only way I could think of to try.
View 9 Replies
View Related
Apr 2, 2013
I want to use i Logic to retreave or push the i Property of "Project" from my skeleton file to the rest of the parts and assemblies in the project.
View 9 Replies
View Related
Jan 30, 2012
My goal is to use basic ilogic to fill in some of the standard iproperty fields from parameters.I have so far managed to populate the description iproperty with one value from the parameters using this ilogic code;
iProperties.Value("Project","Description") = length
where length is a user parameter.Want I would like to do is build on this to include more parameters such as material thickness, width and depth etc so the resulting iproperty description field would read something like
1.2mm SS 50x100 @3000
How do I go about writing the ilogic string to include multiple values and end up filling in the one description field?
View 9 Replies
View Related
Jan 28, 2013
I would like to be able to add iproperty values to a derived part from the assembly..!
Breaking it down..:
When i run the rule, it creates a derived part from the Assembly i have open.
The iproperties from the assembly should be copied to the new Derived Part. or just set direclty from the rule, doesn't matter...
View 9 Replies
View Related
Aug 3, 2011
I'm trying to build a simple ilogic form to fill out iproperty infomation for parts we generate. Our company only uses a few of fields that are available. The problem is that the Physical tab is not available in the form editor. I would like to add this field to my form to be able to select the material for the part. The style/standard editor in our part template file holds all materials we use. Summary, Project, Status, and Custom are all available, why isn't Physical?
View 9 Replies
View Related
Jun 27, 2011
I am trying to use an iLogic rule to populate iProperties (some generic, some custom) from a part number spreadsheet (containing columns such as PART NUMBER, DESCRIPTION, FINISH etc) and the rule keeps throwing up the following error 'Conversion from string "" to type 'Double' is not valid.'
Here’s part of the code (would be extended for the required custom iproperties but I’m assuming the same principle is ok)
StartRule:
'read excel file
GoExcel.Open("C:DESIGNDocumentsEXCEL FILESPART NUMBERS", "PARTS")
'index row 3 through 10000
For rowPN = 3 To 10000
'find first empty cell in PART NUMBER column (Column A)
If (GoExcel.CellValue("A" & rowPN) = "") Then
[code]...
Changing the format of the excel data (number or text) has no effect. Is manipulation of the format required so that Inventor can read text and numbers to iProperties in this way?
View 5 Replies
View Related
Apr 18, 2013
how could I synchronize my drawing with the referenced part?
I have a "User Defined Propertie" called "RBMATNO" in the part and in the drawing.
View 3 Replies
View Related
Sep 19, 2012
I'm working on a main assembly. I want to edit the i properties of components within a sub-assembly, this is fine for "RING:1"
iProperties.Value("RING:1","Project", "Description")="A79-H020B001"
but I get an error message when i try to edit the iproperties of a patterned component within the sub-assembly.
View 3 Replies
View Related
Jun 13, 2013
When you do a Save As or Save Copy As in Inventor the part number in the iProperties is automatically updated to match the new filename. I would expect the Document.SaveAs method in the API to act in a similar way. However I found out that this is not the case.
SaveAs: Document.SaveAs(filename, False) does not update the part number. The new part will still have the same part number as the original part. This can give problems since in the BOM parts with the same part number are interpreted as the same physical part.
SaveCopyAs: Document.SaveAs(filename, True) does work as expected and the part number will update correctly.
Is this a bug in the API? or is there a reasonable explanation for this?
Inventor 2013 SP2
View 5 Replies
View Related
Aug 11, 2012
I am using some code from the June 2010 "Mod the machine" posted by Brian Erkins.I keep getting an error in C# (express 2010), Please see attached screen dump.
I don't see any obvious difference in my code when compared to Brian's (in fact at one point I copied and pasted his code and still had the same error). Here is the
private void button1_Click(object sender, EventArgs e)
{
Inventor.Application invApp = null;
invApp = (Inventor.Application)System.Runtime.InteropServices.Marshal.GetActiveObject("Inventor.Application");
Inventor.Document doc = invApp.ActiveDocument;
Inventor.PropertySet customPropSet;
customPropSet = doc.PropertySets["Inventor User Defined Properties"];
View 1 Replies
View Related
Dec 17, 2013
I want a ilogic rule syntax for following process:
I have one excel sheet it consists around 5 sheets for Plate, Flats, Rounds, etc. When i am run the rule then it will ask and do the following:
Ask the thickness value.It will search thickness value in “D:LINUS KOTTEstock numbers.xlsx” in sheet 1If thickness value found then fill the stock number in iproperty(project tab-stock number)
Here i am using different rules for plate, flat, round, etc.,
View 2 Replies
View Related
Jun 7, 2012
I'm trying to put a little iLogic rule in my drawing template which triggers as soon as the drawing is opened. The rule asks the user whether the component he's making a drawing of needs to be painted or not. If it gets painted, the paint area (one side only or both sides) needs to be calculated. The result of this is then referenced by a text note in the title block.
I can do the radio boxes with the questions, as well as their If loops, but only when I'm in the model. Due to our, admittedly inefficient workflow, we never have time to specify "minor details" like paint area or spec during modelling, only when we get to drawing level. I'd like to put the iLogic rule inside the drawing template. I'm having trouble referencing the iProperties of the model from within the drawing's iLogic interface.
What I have so far is this rule, which I can run inside the model:
'set dummy variable equal to total areatotal_area = iProperties.Area'start radio box with questionsText1 = InputRadioBox("Will this component be painted?", "Yes", "No", Text1, Title := iProperties.Value("Project", "Description"))If Text1 = True ThenText2 = InputRadioBox("How many sides will be painted?", "Both sides", "One side only", Text2, Title := iProperties.Value("Project", "Description"))If Text2 = True TheniProperties.Value("Custom", "Paint Area") = total_areaElseIf Text2 = False TheniProperties.Value("Custom", "Paint Area") = total_area/2End IfElseIf Text1 = False TheniProperties.Value("Custom", "Paint Area") = 0End If
adding a line or two so that I can run the same rule, but from the drawing.
View 9 Replies
View Related
Jul 11, 2013
I'm trying to do this with iLogic, and i'm not getting anywhere. What I need, is to be able get to the iProperties of an associated model that is referenced into a drawing file. I want to make it easier to update the iProperties from the drawing file, without having to open the model file.
Factory Design Suite Ultimate 2012
AutoCAD 2012 | Inventor Professional 2012 | Vault Professional 2012
View 2 Replies
View Related
Apr 9, 2012
how to change the order of custom iProperties. I would like to group like iProperties together to make editing a bit easier.
Windows 7 Pro, SP1
Inventor 2012 SP1
Due to the nature of our business, I am not permitted to attach any files showing models or .idw environments of any actual work-related components.
View 3 Replies
View Related
May 18, 2012
Is there any easy way of adding custom Iprops to previously created parts and assemblies? A macro or something that could set up additional lines without having to go in and type them out all the time?
View 5 Replies
View Related
Sep 18, 2012
we have a part file that has 2 custom iproperties in it.
Length and Width.
If I delete these properties its fine and the properties are removed.
However if I then save the file, the properties become available again.
View 3 Replies
View Related
Mar 23, 2012
Copy custom iproperties from one part to the other - possible?
View 6 Replies
View Related
