AutoCAD Inventor :: Set Assembly IProperties Using ILogic
Jun 1, 2011
I wish to set the properties of an assembly using i Logic. I have the values of the properties in a part that is in the assembly. I wish to pass those values from the part to the assemblies i properties. I tried using the following code, but it gives an error saying it can not find the document "MyAssy.iam"
iProperties.Value("MyAssy.iam", ThisDoc.Path, "Part Number")=AssyNo
I'm not even sure that this is the way to do, but it's the only way I could think of to try.
View 9 Replies
ADVERTISEMENT
Sep 19, 2013
I was looking for some iLogic Code for Inventor 2013 that would cycle through all the parts in an assembly grabbing the quantity of each part and setting it equal to the custom property "Qty" of each part.
Having a little trouble creating the for each loop and setting reference to each part without referencing each part by specific name.
View 6 Replies
View Related
Nov 11, 2013
I would like to copy and paste all iproperties from one part to another, without retyping it all.
What i was thinking about is:
1. Exporting all iproperties to .txt
2. Run a import .txt rule to iproperties.
Is it possible? If so, How could i accomplish a task such as this?
Privacy warning: Since I live in a country that has traded liberty for the illusion of security, all of your posts to me are being monitored and saved by the United States Government.
View 1 Replies
View Related
Oct 18, 2013
I am sure this is extremely simple to do but I am missing something. I am wanting to set the Description of a part in the Iproperties using values from the parameters. For instance, if the part has a length value of 10 and a width value of 5 I want the Description to say: 10 x 5 Floor Sheet
I cannot figure out how to extract the parameter values and place them into the iproperties. Here is what I have tried: iProperties.Value("Project", "Description")=" =<Length> x <Width> Floor Sheet"... This gives me the following result in my description: x Floor Sheet
View 4 Replies
View Related
Apr 2, 2013
I want to use i Logic to retreave or push the i Property of "Project" from my skeleton file to the rest of the parts and assemblies in the project.
View 9 Replies
View Related
Jan 30, 2012
My goal is to use basic ilogic to fill in some of the standard iproperty fields from parameters.I have so far managed to populate the description iproperty with one value from the parameters using this ilogic code;
iProperties.Value("Project","Description") = length
where length is a user parameter.Want I would like to do is build on this to include more parameters such as material thickness, width and depth etc so the resulting iproperty description field would read something like
1.2mm SS 50x100 @3000
How do I go about writing the ilogic string to include multiple values and end up filling in the one description field?
View 9 Replies
View Related
Jan 28, 2013
I would like to be able to add iproperty values to a derived part from the assembly..!
Breaking it down..:
When i run the rule, it creates a derived part from the Assembly i have open.
The iproperties from the assembly should be copied to the new Derived Part. or just set direclty from the rule, doesn't matter...
View 9 Replies
View Related
Aug 3, 2011
I'm trying to build a simple ilogic form to fill out iproperty infomation for parts we generate. Our company only uses a few of fields that are available. The problem is that the Physical tab is not available in the form editor. I would like to add this field to my form to be able to select the material for the part. The style/standard editor in our part template file holds all materials we use. Summary, Project, Status, and Custom are all available, why isn't Physical?
View 9 Replies
View Related
Nov 2, 2010
Is it possible to automatically add custom iproperties using iLogic?
I have a rule thats adds text to a propery, but when I run the rule in an old partfile i get the error:
"Can't find a property named DrawingNo"
Is there something like:
"Create iProperties.Value("Custom", "DrawingNo")"?
View 3 Replies
View Related
Jun 27, 2011
I am trying to use an iLogic rule to populate iProperties (some generic, some custom) from a part number spreadsheet (containing columns such as PART NUMBER, DESCRIPTION, FINISH etc) and the rule keeps throwing up the following error 'Conversion from string "" to type 'Double' is not valid.'
Here’s part of the code (would be extended for the required custom iproperties but I’m assuming the same principle is ok)
StartRule:
'read excel file
GoExcel.Open("C:DESIGNDocumentsEXCEL FILESPART NUMBERS", "PARTS")
'index row 3 through 10000
For rowPN = 3 To 10000
'find first empty cell in PART NUMBER column (Column A)
If (GoExcel.CellValue("A" & rowPN) = "") Then
[code]...
Changing the format of the excel data (number or text) has no effect. Is manipulation of the format required so that Inventor can read text and numbers to iProperties in this way?
View 5 Replies
View Related
Apr 18, 2013
how could I synchronize my drawing with the referenced part?
I have a "User Defined Propertie" called "RBMATNO" in the part and in the drawing.
View 3 Replies
View Related
Sep 19, 2012
I'm working on a main assembly. I want to edit the i properties of components within a sub-assembly, this is fine for "RING:1"
iProperties.Value("RING:1","Project", "Description")="A79-H020B001"
but I get an error message when i try to edit the iproperties of a patterned component within the sub-assembly.
View 3 Replies
View Related
Jan 10, 2007
I am trying to click on the "Iproperties" of an assembly but it is grayed out. It is not in a library, it is checked out of the vault, there is no lock icon if I use Iassembly tools (which I just installed to try the unlock.
If I place it in a parent assembly, I can then access the "properties" but it is difficult to do that workaround and I cannot do an update on the mass properties unless I can access the "Iproperties".
Inventor 11 SP2 Build 344a
Vault 5.0 Build 11.1.145.0
View 4 Replies
View Related
Jan 19, 2013
I'm using Visual Basic 2010 Express and Inventor 2013. I can get the properties such as PartName, Description information of the all sub parts using below
Dim invDocs As Documents
invDocs = inv_App.Documents
Dim i As Integer
Dim invDocument As Document
For i = 1 To invDocs.Count
[code].........
Above code works perfect. But I want to get or change i property values of the selected part or assembly in the biggest assembly. I got below information:
Dim selSet As SelectSet
selSet = asmDoc.SelectSet
Dim compOcc As ComponentOccurrence
Dim obj As Object
For Each obj In selSet
compOcc = obj
'Debug.Print(compOcc.Name)
compOcc.Visible = False
Next
But I do not know how can I get the properties of the selected part or sub-asm . How can I walk from "compOcc" to "invDocument.PropertySets.Item("Design Tracking Properties").Item("Description") "
P.S. I will check the selected part quantity. It must be only ONE! Control Code below:
Dim asmDoc As AssemblyDocument
asmDoc = inv_App.ActiveDocument
If asmDoc.SelectSet.Count <> 1 Then
MsgBox("You need to select only one part or sub-asm to change properties...!")
Return
End If
View 2 Replies
View Related
Dec 17, 2013
I want a ilogic rule syntax for following process:
I have one excel sheet it consists around 5 sheets for Plate, Flats, Rounds, etc. When i am run the rule then it will ask and do the following:
Ask the thickness value.It will search thickness value in “D:LINUS KOTTEstock numbers.xlsx” in sheet 1If thickness value found then fill the stock number in iproperty(project tab-stock number)
Here i am using different rules for plate, flat, round, etc.,
View 2 Replies
View Related
Oct 26, 2012
I have a form that is loading automatically in my part model. where i write the part number, description, project and custom titles.
my questions are:
1 - when i write the part number i would like then when i click apply it opens the save box with the same part number.
2 - it's possible to check-in the file during the saving and keeping the file checkout?
3 - i would like that some of the properties would be transfer to the drawing, like the description and the project (this two are from the part properties.
4 - transfer also for the drawing the custom titles to the custom i properties of the drawing as pre fill in.
View 1 Replies
View Related
Jun 7, 2012
I'm trying to put a little iLogic rule in my drawing template which triggers as soon as the drawing is opened. The rule asks the user whether the component he's making a drawing of needs to be painted or not. If it gets painted, the paint area (one side only or both sides) needs to be calculated. The result of this is then referenced by a text note in the title block.
I can do the radio boxes with the questions, as well as their If loops, but only when I'm in the model. Due to our, admittedly inefficient workflow, we never have time to specify "minor details" like paint area or spec during modelling, only when we get to drawing level. I'd like to put the iLogic rule inside the drawing template. I'm having trouble referencing the iProperties of the model from within the drawing's iLogic interface.
What I have so far is this rule, which I can run inside the model:
'set dummy variable equal to total areatotal_area = iProperties.Area'start radio box with questionsText1 = InputRadioBox("Will this component be painted?", "Yes", "No", Text1, Title := iProperties.Value("Project", "Description"))If Text1 = True ThenText2 = InputRadioBox("How many sides will be painted?", "Both sides", "One side only", Text2, Title := iProperties.Value("Project", "Description"))If Text2 = True TheniProperties.Value("Custom", "Paint Area") = total_areaElseIf Text2 = False TheniProperties.Value("Custom", "Paint Area") = total_area/2End IfElseIf Text1 = False TheniProperties.Value("Custom", "Paint Area") = 0End If
adding a line or two so that I can run the same rule, but from the drawing.
View 9 Replies
View Related
Jul 11, 2013
I'm trying to do this with iLogic, and i'm not getting anywhere. What I need, is to be able get to the iProperties of an associated model that is referenced into a drawing file. I want to make it easier to update the iProperties from the drawing file, without having to open the model file.
Factory Design Suite Ultimate 2012
AutoCAD 2012 | Inventor Professional 2012 | Vault Professional 2012
View 2 Replies
View Related
Nov 2, 2011
I am using ilogic in Inventor 2011 to update my iproperties when I save a .dwg file. I am having problems with some custom iProperties I have created that are of the type 'number' and are initially set to 0 (zero). After the iLogic rule has run and the user has entered a numeric value the type of the custom iproperty has changed to 'text'.
The ilogic code I am using is:
If iProperties.Value("Custom", "Nominal ID") = 0 Then
iProperties.Value("Custom", "Nominal ID") = InputBox("Enter The Nominal ID (Enter 0 if no value is available)", "Nominal ID", 0)
Custom_iProp_Nom_ID = iProperties.Value("Custom", "Nominal ID")
End If
I am using Vault 2011 and would like to map this property to a numeric property so I can perform <= and >= searches.
View 2 Replies
View Related
Sep 18, 2012
We have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.
View 1 Replies
View Related
Nov 9, 2011
I want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies
View Related
Aug 25, 2012
Any way to use iLogic to create custom iProperties from the cells in an Excel spreadsheet (both text and numbers) for a .dwg template. The only thing even close has been a user who already knew how to do it and was having a different problem. I am using Inventor 2012 and Excel 2003 and have very little experience with VB. I currently have a family of assemblies, consisting of two parts linked to an Excel spreadsheet to control the various parameters for each variation of the assembly.
I need creating an iLogic rule that will:
Go to a specific tab (I have four different tabs/worksheets) in an Excel spreadsheet.
Make a specfic row of that worksheet the current row based on the part number used to generate the models of the assembly shown in a .dwg.
Use the contents of a cell in that row (text or numeric or a combination of both) to generate a custom iProperty for the .dwg template.
Use the custom iProperties to fill in the title block of the template.
View 4 Replies
View Related
Sep 6, 2013
I would like to make a form that updates / creates custom properties for ALL parts in an assembly so that i dint have to go through them one by one.
Is there any sample code anywhere or a good code resource?
View 1 Replies
View Related
Nov 19, 2012
I'm using Inventor 2011 and when I go to change parameters using iLogic in an assembly model, (sometimes it is a component suppression, other times it is an iPart component change) it won't update the associated drawing file. I need to go into the BOM on the drawing and renumber the balloons, or change something else in order for the custom iProperties to update in the drawing template. If I just change the iPart component, then the BOM doesn't need to update making the renumbering of balloons redundant.
I'm using iLogic to update all of the iProperties and component references, then reattach balloons. What I would like to do is automatically update the custom iProperties drawing template fields, and renumber the drawing BOM.
View 2 Replies
View Related
Sep 30, 2013
I'm trying to figure out how to create an iLogic rule that would create a Custom iProperties and put in what version of Inventor the file was last updated with.
View 8 Replies
View Related
Sep 24, 2012
I want to import some of the iproperties of one ipt file into an iam file.how to do it.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
View 9 Replies
View Related
Aug 26, 2013
I am trying to make a dxf from each sheet metal part in an assembly with ilogic: (I have cut and and paste different codes from this forum in an poor attempt...)
Sub Main
Dim oApp As Inventor.Application = ThisApplication
Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument
For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments
If oSubDoc.DocumentType = kPartDocumentObject Then
Dim oPartPropset As Inventor.PropertySet = oSubDoc.PropertySets("Design Tracking Properties")
Dim oPartParam As Inventor.PropertySet = oSubDoc.PropertySets("Inventor User Defined Properties")
[code].....
View 2 Replies
View Related
Oct 26, 2012
I got here on in my templates, two types of weight - net and gross. I've changed the main property MASS of each PART to be the GROSS weight, so when i have one assembly i always get the total gross weight.
And when i wanna get the NET, I open the BOM, show the proper column with this net weight and then export do XLS to sum all of then..
Now the doubt is, to get the things easier, is there a way to put some code in the assemblies, that could sum all the properties "X" from each part and sub assembly to get the total net weight ?
View 7 Replies
View Related
Oct 3, 2011
I am very new to this whole concept of having ilogic based rules to drive your part design. I have even gotten as far as creating a ipart and having ilogic rules be able to suppress, unsuppress, change values and dimensions using ilogic rules. I now want to be able to use ilogic rules to drive some of the various(yet similiar) assemblies that I create all the time.
For instance, If I have just a flat plate as the base component with a shaft welded to it that varies in length for my assemblies. Since the shaft varies in length, I went ahead and created iparts for all the lengths of the shafts. I can manually change which shaft I want represented in the assembly, but I would like to to know how do I get Ilogic to place the different shafts based on user parameters???
I've looked into component place iparts, but can't seem to get the code to work. The list of iparts tree within the model doesn't pop up in the model tab in the ilogic rule, only the base component.
View 1 Replies
View Related
Jul 25, 2012
How to run iLogic Rule which I created for .ipt file in assembly?
As I have a myPart.ipt file with iLogic Rules which could create part1.ipt, part2.ipt, ..... (hundreds of them).
Now, I want creats iLogic Rule in myAssembly.iam to run the iLogic Rules in myPart.ipt in order I could create correct .ipt file to be used in myAssembly.iam.
View 4 Replies
View Related
Jul 26, 2012
I have the same ilogic part placed in the same assembly, and i am trying to drive two different configurations of the same part and when i apply the configuration it changes both of the parts but to only one of the configurations.
Is there a way to drive them seperately even though they are the same part.
View 5 Replies
View Related
