AutoCAD Inventor :: ILogic - How To Sum A Property Of All Sub Assembly
Oct 26, 2012
I got here on in my templates, two types of weight - net and gross. I've changed the main property MASS of each PART to be the GROSS weight, so when i have one assembly i always get the total gross weight.
And when i wanna get the NET, I open the BOM, show the proper column with this net weight and then export do XLS to sum all of then..
Now the doubt is, to get the things easier, is there a way to put some code in the assemblies, that could sum all the properties "X" from each part and sub assembly to get the total net weight ?
View 7 Replies
ADVERTISEMENT
Oct 25, 2012
I got here on in my templates, two types of weight - net and gross. I've changed the main property MASS of each PART to be the GROSS weight, so when i have one assembly i always get the total gross weight.
And when i wanna get the NET, I open the BOM, show the proper column with this net weight and then export do XLS to sum all of then..
Now the doubt is, to get the things easier, is there a way to put some code in the assemblies, that could sum all the properties "X" from each part and sub assemblie to get the total net weight ?
View 1 Replies
View Related
Sep 21, 2011
I would like to set the custom property format for all user paramters from an iLogic code. This is what I've come up with. It runs, but it does not seem to alter the custom property format. What am I doing wrong here?
DimoPartDocAsPartDocument
oPartDoc=ThisApplication.ActiveDocument
DimoParameterAsParameter
ForEachoParameterInoPartDoc.ComponentDefinition.Parameters
oParameter.ExposedAsProperty=True
ShowUnitString=True
ShowLeadingZeros=True
ShowTrailingZeros=False
Precision=kTwoDecimalPlacesPrecision
NextoParameter
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
View 9 Replies
View Related
Sep 18, 2012
We have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.
View 1 Replies
View Related
Nov 9, 2011
I want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies
View Related
Jun 21, 2012
Dim propertyName1 As String = "Mortise"Dim propertyName2 As String = "Cut Length"customPropertySet = ThisDoc.Document.PropertySets.Item("Inventor User Defined Properties")Try prop = customPropertySet.Item(propertyName1) prop = customPropertySet.Item(propertyName2)Catch ' Assume error means not found customPropertySet.Add("", propertyName1) customPropertySet.Add("", propertyName2)End Try'output the custom iproperties and update the fileRuleParametersOutput()InventorVb.DocumentUpdate()'set iProperties 'iProperties.Value("Custom", "Mortise") = ""'update fileiLogicVb.UpdateWhenDone = True
This code creates custom iProperties if the iProperty isn't found. I'd like to add another iProperty called "Resaw" with a Yes/No property type. Is there a way of doing this the way I have things started here?
View 3 Replies
View Related
Oct 29, 2013
I am having a problem with an assembly not showing the correct total mass of all of its components and sub-assemblies. The value is out by nearly 20%, over 3000kg!
I have narrowed the mass discrepancy down to a derived part of a sub-assembly. But this incorrect mass is only present when I navigate to the derived part's iproperites via the browser tree of the higher level assembly where I am having the mass problem. It is as though the top assembly got some of its mass property information from a previous point in time, i.e. possibly before the derived part's mass properties were updated, and now refuses to look at the current information.
By the way, I have opened up and checked the mass properties of each sub-assembly and the derived part; and when opened individually these show as correct. I have also tried 'Rebuild All' with no success.
Is it possible for mass properties in an assembly to become corrupted?
View 6 Replies
View Related
Aug 28, 2013
I need to use the property " File Subtype" for programming a function in logic, but inventor not recognise this property.
I use this function "If iProperties.Value("Project","File Subtype")=Sheet metal"
How i can do for use this property for a ilogic function?
View 3 Replies
View Related
Oct 31, 2013
I have a part number that i want to defined in custom properties.
Then would it be possible to call it out in Ilogic? that way in any drawing doesn't matter where the part number will always be the same for that part when i balloon and the same in the BOM.
View 4 Replies
View Related
Apr 8, 2013
I have a frame fabrication / assembly with a Custom iProperty called "FINISHED MATERIAL SIZE". I have set the following parameter for this property:
FINISHED MATERIAL SIZE = <Stock Number> x <G_L>mm
This returns the stock size and length to my drawing cutlist. The problem is that the <G_L> Parameter returns the trailing zeros and unit string.
I would like to set all the frame members in the assembly such that the G_L parameter returns a value rounded off to 0 decimal places with no trailing zeros and removes the unit string as well.
Is there a way I can achieve this from the assembly so I don't have to manually open each frame member and make the changes in the fx parameters dialog one at a time?
View 3 Replies
View Related
May 16, 2013
When using Inventor with Vault, we have a problem when categorizing custom content center parts in Vault. In short, custom content center parts are incorrectly categorized as "Content Center" and automatically released - as there is no property that we can use to identify these files.
I need iLogic code to trigger when custom content center files are created/saved, wich adds the following custom iproperty "IsCustomContentCenter=True".
View 1 Replies
View Related
Aug 26, 2013
I am trying to make a dxf from each sheet metal part in an assembly with ilogic: (I have cut and and paste different codes from this forum in an poor attempt...)
Sub Main
Dim oApp As Inventor.Application = ThisApplication
Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument
For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments
If oSubDoc.DocumentType = kPartDocumentObject Then
Dim oPartPropset As Inventor.PropertySet = oSubDoc.PropertySets("Design Tracking Properties")
Dim oPartParam As Inventor.PropertySet = oSubDoc.PropertySets("Inventor User Defined Properties")
[code].....
View 2 Replies
View Related
Jun 1, 2011
I wish to set the properties of an assembly using i Logic. I have the values of the properties in a part that is in the assembly. I wish to pass those values from the part to the assemblies i properties. I tried using the following code, but it gives an error saying it can not find the document "MyAssy.iam"
iProperties.Value("MyAssy.iam", ThisDoc.Path, "Part Number")=AssyNo
I'm not even sure that this is the way to do, but it's the only way I could think of to try.
View 9 Replies
View Related
Oct 3, 2011
I am very new to this whole concept of having ilogic based rules to drive your part design. I have even gotten as far as creating a ipart and having ilogic rules be able to suppress, unsuppress, change values and dimensions using ilogic rules. I now want to be able to use ilogic rules to drive some of the various(yet similiar) assemblies that I create all the time.
For instance, If I have just a flat plate as the base component with a shaft welded to it that varies in length for my assemblies. Since the shaft varies in length, I went ahead and created iparts for all the lengths of the shafts. I can manually change which shaft I want represented in the assembly, but I would like to to know how do I get Ilogic to place the different shafts based on user parameters???
I've looked into component place iparts, but can't seem to get the code to work. The list of iparts tree within the model doesn't pop up in the model tab in the ilogic rule, only the base component.
View 1 Replies
View Related
Jul 25, 2012
How to run iLogic Rule which I created for .ipt file in assembly?
As I have a myPart.ipt file with iLogic Rules which could create part1.ipt, part2.ipt, ..... (hundreds of them).
Now, I want creats iLogic Rule in myAssembly.iam to run the iLogic Rules in myPart.ipt in order I could create correct .ipt file to be used in myAssembly.iam.
View 4 Replies
View Related
Jul 26, 2012
I have the same ilogic part placed in the same assembly, and i am trying to drive two different configurations of the same part and when i apply the configuration it changes both of the parts but to only one of the configurations.
Is there a way to drive them seperately even though they are the same part.
View 5 Replies
View Related
Nov 29, 2010
My task consist in exporting a BOM of an iLogic assembly.
Is any way to get an accurate BOM of other LOD other than the master. If so, is it only available in certain Inventor releases?
I am trying to accomplish this through API, but I get error when in different LOD than master. iLogic assembly has some parts suppress thats why we need to create a new BOM.
View 9 Replies
View Related
Jul 1, 2013
I have a parent assembly that contains multiple sub assemblies, two of which need to synchronize with each other.In the parent assembly, I have created a user form that controls the sizes and quantities of all the different sub assemblies.
Sub assembly 1 contains a bracket for supporting 4 rows of pipes.Based on the width selected from the main parent assembly, the length of this bracket can vary.
The spacing of the 4 mounting positions is also determined from the length of the bracket.Sub assembly 2 is an assembly containing all the pipes.The pipes are spaced apart to suit the bracket using a component pattern, and it is this distance that I want to control from the parent assembly.This is just one of the basic scripts I've tried.
Pipe_Spacing=Parameter("SubAssembly1:1", "Pipe_Spacing_A")
Parameter("Piping assembly:1", "Pipe_Spacing_B")=Pipe_Spacing
Pipe_Spacing_A is the spacing of the bracket
Pipe_Spacing_B is the component pattern in the piping assembly
Pipe_Spacing is the parameter in the parent assembly to be driven by the bracket parameters.
I have very little iLogic experience & have being learning as I go along with this project.My best guess is that the code can't loop back on itself. On a slightly different note, I have also noticed that the sub assemblies don't update properly.
If I adjust the width to X and regenerate the model, some of the sub assembly updates. To fully update, I have to go back into the user form, change the size to Y & then change it back again to X and then regenerate.
View 1 Replies
View Related
Nov 19, 2012
I'm now having an issue accessing the features in an assembly, the error message is attached and the following is the relative code.
The error line is between the 2 Test Messages:
'Create a Component Definition relative to the Part Document
Dim oFeature As Features
Dim oAssembly As AssemblyDocument
oAssembly = oCompOcc.Definition.Document
MsgBox("Test 1")
'Cycle through all features in the Part
For Each oFeature In oAssembly.ComponentDefinition.Features
MsgBox("Test 2")
View 3 Replies
View Related
Oct 27, 2013
Is it possible to change a normal assembly into a weldment assembly through iLogic?
View 4 Replies
View Related
Jul 25, 2012
Before using iLogic, I created lot of iAssembly and iPart. I could change iPart factory member when I need in iAssembly.Now, I want to move everything to iLogic.
how could I change the part by iLogic code?
For example:
I generated "Part1.ipt" and "Part2.ipt",...... (I have hundred of member)
In my assembly, sometimes, I need use Part1.ipt, sometimes I need use Part2.ipt.
Which is the iLogic Code I should to use?
Inventor 2009, WIN XP.
Autodesk Inventor Professional 2013 (64 Bit) SP2
Windows 7 Professional Service Pack 1
Intel(R) Xeon(R) CPU E5645
12.0 GB Memory
View 9 Replies
View Related
Mar 6, 2012
I need to be able to pick a face on a part in an assembly inside a iLogic rule. How can I set up the events to suspend the code to have the user pick the face?
View 6 Replies
View Related
Jan 9, 2012
I have made an iLogic external module who copy the iProperties from an Excel files, when i open the module from the *.ipt file il works perfectly. But i need this function from *.iam files.
Something like this: when i click with right button in one selected part of assembly i can open the module only for this part and when i save it save the change for all modify part of *.
View 1 Replies
View Related
Apr 4, 2013
I want to use I logic to adjust an assembly constraint based on T/F value passed from a master sketch.
I have passed the paramater T/F and/or a user paramater as described in this thread using link (neet trick).. but when the code fires it only works on the true application and not the false.. if i open the rule and then close it the update button becomes available and when updated the false condition updates sucessfully. I have tried just re-running the rule to no avail. It seams that the only way I can get it to triger a false condition is to open the rule... close it and update.
If Parameter("iTrigger0101000") = 1 Thend37_Header1 = -.25 ind34_Header2 = -.25 inElseIf Parameter("iTrigger0101000") = 0 Thend37_Header1 = -.25 ind34_Header2 = 0.0 inEnd If
View 2 Replies
View Related
Jan 9, 2014
I would like to count all my parts in the main assembly and assign that amount to each part.
Example: Main assembly has: 10 Parts A and 5 Parts B. I would like to run a rule that "sends" that "10" to Part A.ipt and the "5" to Part B.ipt
I would like to assign it to iProperties.Status.Status. I start to understand iLogic more and more but it is nice to get a little boost in the right direction.
View 4 Replies
View Related
May 10, 2012
Change pattern ilogic. How do you change the distance and quantity in an assembly with ilogic?
It is simple in a part but in an assembly the parameters and equations do show.
View 1 Replies
View Related
Apr 23, 2013
The setup is: I have a rule which first gets a number of user parameters via input boxes.This rule then runs a number of other rules, using:
iLogicVb.RunRule("Rule 1")iLogicVb.RunRule("Rule 2")iLogicVb.RunRule("Rule 3").Each of these rules control parameters, part/feature/constraint suppression etc. in the top level and subassemblies/parts based on the previously obtained user parameters.
All the rules have the 'Don't run automatically' option selected, so all should only run as intended when I manually run the first rule.When I run the first rule, I enter all the parameters, and the subsequent rules run.The problem is, the suppression states etc. in the subassemblies/parts do not update.
Looking at the parameters dialog box after the rules have run, all user parameters have updated with the new values.If I run the first rule again the subassemblies/parts update correctly.
It appears that the rules that control the suppression states etc. of the subassemblies run using the initial values of the user parameters, i.e. the values as they were before the user input is obtained, rather than the new values.This is confusing me, as the code is structured as follows:
user_parameter_1 = InputBox("User Parameter 1", "Input", "xx")user_parameter_2 = InputBox("User Parameter 2", "Input", "xx")iLogicVb.RunRule("Rule 1")iLogicVb.RunRule("Rule 2")
View 2 Replies
View Related
Oct 6, 2011
I Created an iLogic Rule that sets up some parameters.
I want to Automatically opens each and every Part in my assembly, run this Rule, and then save it without me having to do so manually.
View 8 Replies
View Related
Jul 26, 2012
I need to modify all the ipt in an assembly, but I don't kow how many ipt I have, and I don't know the name. Can I have with iLogic the list of all the ipt used in the assembly ? For example, to modify the Part Number in all the components.
The code should be like this :
For All component in Assembly
...
...
Next component
View 3 Replies
View Related
Oct 26, 2011
Is there a way to set an assemblies bill of material setting to reference through iLogic?
View 3 Replies
View Related
Oct 25, 2011
I'm using I-logic to suppress components in an assembly. I've attached a screenshot with 3 suppressed components.
In the browser the parts are suppressed but in the BOM (items 6,7,9) they are not. Is there a piece of code for this?
View 5 Replies
View Related
