I would like to count all my parts in the main assembly and assign that amount to each part.
Example: Main assembly has: 10 Parts A and 5 Parts B. I would like to run a rule that "sends" that "10" to Part A.ipt and the "5" to Part B.ipt
I would like to assign it to iProperties.Status.Status. I start to understand iLogic more and more but it is nice to get a little boost in the right direction.
I Created an iLogic Rule that sets up some parameters.
I want to Automatically opens each and every Part in my assembly, run this Rule, and then save it without me having to do so manually.
I have a iLogic assembly with some parts and sub assembly. I need to do a copy of this " Generator " to apply the result later in other assemblies. (something like a member of a ipart or i assembly).
Is there any way to do the copy the assembly to a new folder without the suppressed parts and subassemblies (wich are suppressed in the initial main assembly by iLogic rules)?
I tried to use "Pack and go" and "iLogic design copy", but they always bring the suppressed parts and assembly's, to the new folder and which i don't need to apply in the other assemblies.
How to use different configuration of parts made with iLogoc in assembly? I want to have equal part with different configuration. I have a problem with the equal files.How to use different configuration of an assembly made with iLogic in assembly?
View 4 Replies View RelatedI have used Inventor for quite a while but never for much more than the odd 3D model.
I have recently created templates that allow me to use Inventor to create detailed fabrication drawings rather than relying on AutoCAD. But I have run across a question with regards to the BOM. Let me try and explain my issue.
I currently create assemblies for fabricated items. However, in the complete (or top level assembly) there may be multiple fabricated items (assemblies required). At the moment I create the BOM and manually edit the quantities required to reflect the number of assemblies (and resulting parts) that are required.
In my assembly file I created a parameter called "AssemNo" which is meant to reflect the number of assemblies required. In my part files I created a parameter called "AssemQty". I would insert the following iLogic code for each part in the assembly:
quantity - This.BOM.CalculateQuantity("Model Data", "PartNumber")*AssemNo
Parameter("Part Name:1", "AssemQty") = quantity
This works but it requires me to create that line of code for every part in my assembly. I know an iLogic code can be created to search an assembly and change parameters of all parts (see below as an example to copy Occurence name to iProperties >
' set a reference to the assembly component definintion.
' This assumes an assembly document is open.
Dim oAsmCompDef As AssemblyComponentDefinition
oAsmCompDef = ThisApplication.ActiveDocument.ComponentDefinition
'Iterate through all of the occurrences
Dim oOccurrence As ComponentOccurrence
For Each oOccurrence In oAsmCompDef.Occurrences
Dim oName As String
oName = oOccurrence.Name
iProperties.Value(oOccurrence.Name, "Project", "Part Number") = oName
MessageBox.Show(oOccurrence.Name, "iLogic")
Next
Can the two be combined?
Is there a way using ilogic,that when you select/highlight a part within an assembly and run the code that it will turn on the Origin planes only and also turn turn them off ?
View 5 Replies View RelatedWe have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.
I want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies View RelatedI'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies View Relatedit is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
Can I select a bunch of parts in an assembly and say "save these pieces as a new assembly"?
It is just such a needed tool but I cant find an easy way to accomplish this.
i placed an ilogic component (wich i use as a template to later change dimentions) into an assembly file after changing dimentions i placed the same "template" ilogic component into the assembly but when i want to change something on the second component it also changes the first one and that only happens with only one feature of the component the other features work fine.
View 2 Replies View RelatedI have numerous step files which I have imported into an assembly. I now need to move all the imported files to a predefined UCS (not 0,0,0). I can do this manually by using the assemble command and selecting the centre point then selecting the centre point of the pre-defined UCS.
I have potentially thousands of parts to move in various assemblies, is there a way to do this using iLogic and if so, how?
I am trying to suppress part that are labeled as "Reference" on the BOM Strutcture and I can't get the program to cycle through the subassemblies. The following code runs through all the components on the top-level assembly but I can't get it to cycle through the subassemblies.
oCompDef = ThisDoc.Document.ComponentDefinitionoAssemblyComponents = oCompDef.OccurrencesDim oOccurrence As ComponentOccurrenceDim oSubOccurrence1 As ComponentOccurrenceFor Each oOccurrence In oAssemblyComponents If (oOccurrence.BOMStructure = BOMStructureEnum.kReferenceBOMStructure) Then Component.IsActive(oOccurrence.Name) = False Else Component.IsActive(oOccurrence.Name) = True End IfNext
I curently have a rule that generates a part list automatically in a drawing. the problem is that I want the rule to be continuisly running but it keeps generating 2,3,5... parts lists. I need an if statment to check if a parts list already exists.
iLogicVb.UpdateWhenDone = True On Error Resume Next ' Set a reference to the drawing document. ' This assumes a drawing document is active. Dim oDrawDoc As DrawingDocument oDrawDoc = ThisApplication.ActiveDocument 'Set a reference to the
[Code].....
If I draw a flat square, and then a flat circle next to it, can I do things using iLogic that will make the two seperate parts interact? such as say 'if the circle contacts the square, then make the square become a circle too' or something like that?
View 3 Replies View Relatedim trying to programatically add a parts list into a drawing whilst programatically creating the drawing - the code works fine without the parts list code. The error its showing is 'Parameter incorect' on the line that sais PartsList.add(... In the past when ive got this error with other code it has been because ive used an incorrect parameter (e.g. decimal instead of an integer).
My error is somewhere inside the oPartsList.add(>>ERROR SOMEWHERE HERE<<<)
oDrawDoc = InvApp.Documents.Add(Inventor.DocumentTypeEnum.kDrawingDocumentObject,AssyTemplate,True)
oSheet = oDrawDoc.Sheets.Item(1)
[Code].....
Is it possible to replace sub assemblies using ilogic - I can only see a link to replace parts?
View 1 Replies View RelatedI need to generate an iLogic rule exporting Parts List (not BOM) from a IDW to a specific folder in XLS format.
Using Autodesk AutoCAD Inventor 2011
I need to use/write a iLogic code. I have a assy, in this assy i have parameter Height and Width. And it´s no problem to controlls this two rules/value.
But I have a problem with the rule when my height will control the number of parts
If my height is 500-1000, one part.
If my height is 1000-1500, two parts.
If my height is 1500-2000, three parts.
Is it best to use suppress or use a pattern in this case?
I am looking for a rule that will search assembly down all levels and find .ipts with the material of plywood and when found change all plywoods to color Clear - Light.
View 9 Replies View RelatedI want to measure the minimum distance between 2 parts. But I want Ilogic to know what parts to measure according to what i've selected.
I have something like this but its not working... gives me always this error "
Measure.MinimumDistance: No entity named "System.__ComObject" was found."
Dim oOccurrence As ComponentOccurrenceDim oOccurrence2 As ComponentOccurrenceTry oOccurrence = ThisDoc.Document.SelectSet.Item(1)oOccurrence2 = ThisDoc.Document.SelectSet.Item(2)Catch MessageBox.Show("Please select a component before running this rule.", "iLogic") ReturnEnd Try Dim doc As DocumentDim CurFileName As String oOccurrence = ThisApplication.ActiveDocument.SelectSet.Item(1) oOccurrence2 = ThisApplication.ActiveDocument.SelectSet.Item(2) distance = Measure.MinimumDistance(oOccurrence,oOccurrence2)MsgBox(distance)
I have got some ilogic code that i have patched together to sort my parts list in inventor which works great but it will not update all sheets at the same time as when we design we have multiple sheets with parts list on and the odd one without.
add to this code to update all sheets partlists and also recognise that some sheets will not have partslists on so this will need to skip.
below is code that is used to sort
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 4558 StartFragment: 314 EndFragment: 4526 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 4558 StartFragment: 314 EndFragment: 4526 StartSelection: 314 EndSelection: 314
[Code] ...........
I have a part file XXXXYYYY.ipt and I would like an ilogic code that searches if my file name contains "XXXXYYYY" to replace the X's and Y's with 1244SIMS and moves that file to a specified folder. Is there any code out there that will allow me to do this?
View 5 Replies View RelatedI am trying to make a dxf from each sheet metal part in an assembly with ilogic: (I have cut and and paste different codes from this forum in an poor attempt...)
Sub Main
Dim oApp As Inventor.Application = ThisApplication
Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument
For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments
If oSubDoc.DocumentType = kPartDocumentObject Then
Dim oPartPropset As Inventor.PropertySet = oSubDoc.PropertySets("Design Tracking Properties")
Dim oPartParam As Inventor.PropertySet = oSubDoc.PropertySets("Inventor User Defined Properties")
[code].....
I wish to set the properties of an assembly using i Logic. I have the values of the properties in a part that is in the assembly. I wish to pass those values from the part to the assemblies i properties. I tried using the following code, but it gives an error saying it can not find the document "MyAssy.iam"
iProperties.Value("MyAssy.iam", ThisDoc.Path, "Part Number")=AssyNo
I'm not even sure that this is the way to do, but it's the only way I could think of to try.
I got here on in my templates, two types of weight - net and gross. I've changed the main property MASS of each PART to be the GROSS weight, so when i have one assembly i always get the total gross weight.
And when i wanna get the NET, I open the BOM, show the proper column with this net weight and then export do XLS to sum all of then..
Now the doubt is, to get the things easier, is there a way to put some code in the assemblies, that could sum all the properties "X" from each part and sub assembly to get the total net weight ?
I am very new to this whole concept of having ilogic based rules to drive your part design. I have even gotten as far as creating a ipart and having ilogic rules be able to suppress, unsuppress, change values and dimensions using ilogic rules. I now want to be able to use ilogic rules to drive some of the various(yet similiar) assemblies that I create all the time.
For instance, If I have just a flat plate as the base component with a shaft welded to it that varies in length for my assemblies. Since the shaft varies in length, I went ahead and created iparts for all the lengths of the shafts. I can manually change which shaft I want represented in the assembly, but I would like to to know how do I get Ilogic to place the different shafts based on user parameters???
I've looked into component place iparts, but can't seem to get the code to work. The list of iparts tree within the model doesn't pop up in the model tab in the ilogic rule, only the base component.
How to run iLogic Rule which I created for .ipt file in assembly?
As I have a myPart.ipt file with iLogic Rules which could create part1.ipt, part2.ipt, ..... (hundreds of them).
Now, I want creats iLogic Rule in myAssembly.iam to run the iLogic Rules in myPart.ipt in order I could create correct .ipt file to be used in myAssembly.iam.
I have the same ilogic part placed in the same assembly, and i am trying to drive two different configurations of the same part and when i apply the configuration it changes both of the parts but to only one of the configurations.
Is there a way to drive them seperately even though they are the same part.