AutoCAD Inventor :: Using ILogic To Fill Out IProperties
Jan 30, 2012
My goal is to use basic ilogic to fill in some of the standard iproperty fields from parameters.I have so far managed to populate the description iproperty with one value from the parameters using this ilogic code;
iProperties.Value("Project","Description") = length
where length is a user parameter.Want I would like to do is build on this to include more parameters such as material thickness, width and depth etc so the resulting iproperty description field would read something like
1.2mm SS 50x100 @3000
How do I go about writing the ilogic string to include multiple values and end up filling in the one description field?
View 9 Replies
ADVERTISEMENT
Sep 19, 2013
I was looking for some iLogic Code for Inventor 2013 that would cycle through all the parts in an assembly grabbing the quantity of each part and setting it equal to the custom property "Qty" of each part.
Having a little trouble creating the for each loop and setting reference to each part without referencing each part by specific name.
View 6 Replies
View Related
Nov 11, 2013
I would like to copy and paste all iproperties from one part to another, without retyping it all.
What i was thinking about is:
1. Exporting all iproperties to .txt
2. Run a import .txt rule to iproperties.
Is it possible? If so, How could i accomplish a task such as this?
Privacy warning: Since I live in a country that has traded liberty for the illusion of security, all of your posts to me are being monitored and saved by the United States Government.
View 1 Replies
View Related
Oct 18, 2013
I am sure this is extremely simple to do but I am missing something. I am wanting to set the Description of a part in the Iproperties using values from the parameters. For instance, if the part has a length value of 10 and a width value of 5 I want the Description to say: 10 x 5 Floor Sheet
I cannot figure out how to extract the parameter values and place them into the iproperties. Here is what I have tried: iProperties.Value("Project", "Description")=" =<Length> x <Width> Floor Sheet"... This gives me the following result in my description: x Floor Sheet
View 4 Replies
View Related
Jun 1, 2011
I wish to set the properties of an assembly using i Logic. I have the values of the properties in a part that is in the assembly. I wish to pass those values from the part to the assemblies i properties. I tried using the following code, but it gives an error saying it can not find the document "MyAssy.iam"
iProperties.Value("MyAssy.iam", ThisDoc.Path, "Part Number")=AssyNo
I'm not even sure that this is the way to do, but it's the only way I could think of to try.
View 9 Replies
View Related
Apr 2, 2013
I want to use i Logic to retreave or push the i Property of "Project" from my skeleton file to the rest of the parts and assemblies in the project.
View 9 Replies
View Related
Jan 28, 2013
I would like to be able to add iproperty values to a derived part from the assembly..!
Breaking it down..:
When i run the rule, it creates a derived part from the Assembly i have open.
The iproperties from the assembly should be copied to the new Derived Part. or just set direclty from the rule, doesn't matter...
View 9 Replies
View Related
Aug 3, 2011
I'm trying to build a simple ilogic form to fill out iproperty infomation for parts we generate. Our company only uses a few of fields that are available. The problem is that the Physical tab is not available in the form editor. I would like to add this field to my form to be able to select the material for the part. The style/standard editor in our part template file holds all materials we use. Summary, Project, Status, and Custom are all available, why isn't Physical?
View 9 Replies
View Related
Nov 2, 2010
Is it possible to automatically add custom iproperties using iLogic?
I have a rule thats adds text to a propery, but when I run the rule in an old partfile i get the error:
"Can't find a property named DrawingNo"
Is there something like:
"Create iProperties.Value("Custom", "DrawingNo")"?
View 3 Replies
View Related
Jun 27, 2011
I am trying to use an iLogic rule to populate iProperties (some generic, some custom) from a part number spreadsheet (containing columns such as PART NUMBER, DESCRIPTION, FINISH etc) and the rule keeps throwing up the following error 'Conversion from string "" to type 'Double' is not valid.'
Here’s part of the code (would be extended for the required custom iproperties but I’m assuming the same principle is ok)
StartRule:
'read excel file
GoExcel.Open("C:DESIGNDocumentsEXCEL FILESPART NUMBERS", "PARTS")
'index row 3 through 10000
For rowPN = 3 To 10000
'find first empty cell in PART NUMBER column (Column A)
If (GoExcel.CellValue("A" & rowPN) = "") Then
[code]...
Changing the format of the excel data (number or text) has no effect. Is manipulation of the format required so that Inventor can read text and numbers to iProperties in this way?
View 5 Replies
View Related
Apr 18, 2013
how could I synchronize my drawing with the referenced part?
I have a "User Defined Propertie" called "RBMATNO" in the part and in the drawing.
View 3 Replies
View Related
Jul 12, 2013
I have just managed to create my own title block and have an area within for material. I always use the iProperties to populate the titleblock but there isnt a field for material? Is there a way to add a field so it does what i need?
View 4 Replies
View Related
Sep 19, 2012
I'm working on a main assembly. I want to edit the i properties of components within a sub-assembly, this is fine for "RING:1"
iProperties.Value("RING:1","Project", "Description")="A79-H020B001"
but I get an error message when i try to edit the iproperties of a patterned component within the sub-assembly.
View 3 Replies
View Related
Dec 17, 2013
I want a ilogic rule syntax for following process:
I have one excel sheet it consists around 5 sheets for Plate, Flats, Rounds, etc. When i am run the rule then it will ask and do the following:
Ask the thickness value.It will search thickness value in “D:LINUS KOTTEstock numbers.xlsx” in sheet 1If thickness value found then fill the stock number in iproperty(project tab-stock number)
Here i am using different rules for plate, flat, round, etc.,
View 2 Replies
View Related
Oct 26, 2012
I have a form that is loading automatically in my part model. where i write the part number, description, project and custom titles.
my questions are:
1 - when i write the part number i would like then when i click apply it opens the save box with the same part number.
2 - it's possible to check-in the file during the saving and keeping the file checkout?
3 - i would like that some of the properties would be transfer to the drawing, like the description and the project (this two are from the part properties.
4 - transfer also for the drawing the custom titles to the custom i properties of the drawing as pre fill in.
View 1 Replies
View Related
Jun 7, 2012
I'm trying to put a little iLogic rule in my drawing template which triggers as soon as the drawing is opened. The rule asks the user whether the component he's making a drawing of needs to be painted or not. If it gets painted, the paint area (one side only or both sides) needs to be calculated. The result of this is then referenced by a text note in the title block.
I can do the radio boxes with the questions, as well as their If loops, but only when I'm in the model. Due to our, admittedly inefficient workflow, we never have time to specify "minor details" like paint area or spec during modelling, only when we get to drawing level. I'd like to put the iLogic rule inside the drawing template. I'm having trouble referencing the iProperties of the model from within the drawing's iLogic interface.
What I have so far is this rule, which I can run inside the model:
'set dummy variable equal to total areatotal_area = iProperties.Area'start radio box with questionsText1 = InputRadioBox("Will this component be painted?", "Yes", "No", Text1, Title := iProperties.Value("Project", "Description"))If Text1 = True ThenText2 = InputRadioBox("How many sides will be painted?", "Both sides", "One side only", Text2, Title := iProperties.Value("Project", "Description"))If Text2 = True TheniProperties.Value("Custom", "Paint Area") = total_areaElseIf Text2 = False TheniProperties.Value("Custom", "Paint Area") = total_area/2End IfElseIf Text1 = False TheniProperties.Value("Custom", "Paint Area") = 0End If
adding a line or two so that I can run the same rule, but from the drawing.
View 9 Replies
View Related
Jul 11, 2013
I'm trying to do this with iLogic, and i'm not getting anywhere. What I need, is to be able get to the iProperties of an associated model that is referenced into a drawing file. I want to make it easier to update the iProperties from the drawing file, without having to open the model file.
Factory Design Suite Ultimate 2012
AutoCAD 2012 | Inventor Professional 2012 | Vault Professional 2012
View 2 Replies
View Related
Nov 2, 2011
I am using ilogic in Inventor 2011 to update my iproperties when I save a .dwg file. I am having problems with some custom iProperties I have created that are of the type 'number' and are initially set to 0 (zero). After the iLogic rule has run and the user has entered a numeric value the type of the custom iproperty has changed to 'text'.
The ilogic code I am using is:
If iProperties.Value("Custom", "Nominal ID") = 0 Then
iProperties.Value("Custom", "Nominal ID") = InputBox("Enter The Nominal ID (Enter 0 if no value is available)", "Nominal ID", 0)
Custom_iProp_Nom_ID = iProperties.Value("Custom", "Nominal ID")
End If
I am using Vault 2011 and would like to map this property to a numeric property so I can perform <= and >= searches.
View 2 Replies
View Related
Apr 18, 2013
I have made this rule, that should fill out a cell in a spreadsheet with a text from IProperties.. but it seem to work only the first time. 2nd time i run it, nothing happends... not even the msgbox at the end...?!
GoExcel.Open("I:TEGNINGSNUMRE SKEMAERStandard nummer udtagning-test.xlsx", "80000")'Get new partnumber from Excel'Find next empty row in Column BFor RowPN = 2 To 1000RowPN = RowPN + 1If GoExcel.CellValue("B" & RowPN) = 1 Then'Insert title from open DocumentGoExcel.CellValue("C" & RowPN) = iProperties.Value("Summary", "Title")End IfNextGoExcel.Save()
View 3 Replies
View Related
Aug 25, 2012
Any way to use iLogic to create custom iProperties from the cells in an Excel spreadsheet (both text and numbers) for a .dwg template. The only thing even close has been a user who already knew how to do it and was having a different problem. I am using Inventor 2012 and Excel 2003 and have very little experience with VB. I currently have a family of assemblies, consisting of two parts linked to an Excel spreadsheet to control the various parameters for each variation of the assembly.
I need creating an iLogic rule that will:
Go to a specific tab (I have four different tabs/worksheets) in an Excel spreadsheet.
Make a specfic row of that worksheet the current row based on the part number used to generate the models of the assembly shown in a .dwg.
Use the contents of a cell in that row (text or numeric or a combination of both) to generate a custom iProperty for the .dwg template.
Use the custom iProperties to fill in the title block of the template.
View 4 Replies
View Related
Sep 27, 2013
Is there any way to automatically fill in description in iProperties (.idw) from model description?
View 7 Replies
View Related
Sep 30, 2013
I'm trying to figure out how to create an iLogic rule that would create a Custom iProperties and put in what version of Inventor the file was last updated with.
View 8 Replies
View Related
Nov 4, 2011
I try to filter an Excel List and therby fill certain Multivalue Parameters with the filtered data.
The filter works fine an provides me a string looking like the sytax for the MULTIVALUE.SETLIST command.
B6string = FilterReturn & Chr(130) & B6String = 75‚80‚250‚65‚45‚250
Unfortunatly this string gets exactly as ONE entry in the Parameters Value listing !
MultiValue.SetList("B6_Lochbild_Länge", B6String)
I also tried
MultiValue.List("B6_Lochbild_Länge") = New Integer () {B6String}
and also
B6string = Chr(148) & FilterReturn & Chr(148) & Chr(130) & B6String
with the same effect !
View 2 Replies
View Related
Sep 7, 2013
Okay, so it's been a while since I've done one of these, and I haven't done one on 2014 at all yet.
I've got a fairly simple part, it's about 6" long x 3" wide, less than 3/8" thick, without a whole lot of complex geometry to work with. I've built up my whole mold for it, and that went okay, but the fill analysis seems like it's taking forever. Like hours. It gets to the "Fill" stage, gets just a sliver of green on the progress bar, and then sits.
Last time I tried this was on my workstation at the office, using 2013. It didn't take nearly this long, and the part was much larger and far more complex, with a significantly slower computer.
Is something broken with this in 2014? I guess I can just let it run overnight, see what happens in the morning ...
Product Design Suite Ultimate 2013, 2014
Autodesk Inventor 2013
Work: Dell Precision T1600 (Xeon E3-1280 / 16GB / 512 GB SSD / 250 GB (Internal) / 1 TB (External) / Quadro 600)
Home: i7-4770k / ASUS Z87-Pro / 16GB / 250 GB SSD / 1 TB HDD / 3 TB USB3 HDD / 2xRadeonHD 4870 in CrossfireX
Laptop: Toshiba Satellite P755-S5269 (i7-2630QM / 8 GB / 250 GB SSD / 750 GB HDD / GT540M)
View 9 Replies
View Related
Aug 19, 2013
how can I close an iLogic Form from either an iLogic Rule, or a VBA Rule (VBA is the Preferred method)?
View 5 Replies
View Related
Apr 10, 2013
I want to make popup the i properties windows to fill or change in 2 ways:
» when creating a new ipt, iam and idw
» just before saving all 3
the properties I want to validate are
- the title not filled
- if there is more than one line filled in comments
View 1 Replies
View Related
Mar 7, 2013
I am opening, using VBA, the iProperties "Pop Up" box, using the following code....
ThisApplication.CommandManager.ControlDefinitions.Item("AppiPropertiesWrapperCmd").Execute
If it is possible to open the iProperties "Pop Up" box at a specific Tab, for example, "Physical" or "Status" etc?
View 1 Replies
View Related
Dec 5, 2012
Is there any way to add an "iProperties" item to the context menu in the drawing environment, so that I can select a part on the drawing and access its iProperties, instead of having to "Open, edit iProp, Close," for each individual part? - Using Autodesk Inventor Professional 2012
View 2 Replies
View Related
Jul 3, 2012
Any way of having 2 files with different file name but identical designs what automatic updates the other one?
I need the same valve design with different materials, stock number and part names but I would like to make sure that both files are always updated to latest rev. Without having to remember to do it my self every time.
We are using vault?
View 4 Replies
View Related
Jul 9, 2012
Is it possible to create a new TAB in the standard iProperties dialogue box for Inventor Models and Drawings? I want a completely new TAB to hold unique company information fields without having to create Custom Property fields.
View 2 Replies
View Related
Aug 26, 2013
While in assembly, i would like to select a subpart and be able to clear or delete the value of ex description without opening the part file.
I can delete properties in custom prop but i cant do it in description....
I've use design tracking properties but to no avail....
View 3 Replies
View Related
