Is there any easy way of adding custom Iprops to previously created parts and assemblies? A macro or something that could set up additional lines without having to go in and type them out all the time?
View 5 Replies
I was looking for some iLogic Code for Inventor 2013 that would cycle through all the parts in an assembly grabbing the quantity of each part and setting it equal to the custom property "Qty" of each part.
Having a little trouble creating the for each loop and setting reference to each part without referencing each part by specific name.
Is there a way to display the mass of a selection of parts through iProperties ? Similarly to the way to show the mass of a single part but but selecting multiple parts and getting their collective mass ?
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I would like to make a form that updates / creates custom properties for ALL parts in an assembly so that i dint have to go through them one by one.
Is there any sample code anywhere or a good code resource?
I've run into an issue with the Content Center customization. I easily understand how to manipulate the table to create parts with our part numbers, different material spec, & other predetermined aspects of the included templates that were included with the Inventor 2012 update. The issue I'm running into is that we would like to add or modify the original part the table is referring to.
In my example pics there is a bushing that I would like to control the hex nut size on. In the model it was created with a tangent constraint within the sketch instead of a linear dimension from the two flat surfaces. I would like to change that, but keep getting error messages stating:
I am using some code from the June 2010 "Mod the machine" posted by Brian Erkins.I keep getting an error in C# (express 2010), Please see attached screen dump.
I don't see any obvious difference in my code when compared to Brian's (in fact at one point I copied and pasted his code and still had the same error). Here is the
private void button1_Click(object sender, EventArgs e)
{
Inventor.Application invApp = null;
invApp = (Inventor.Application)System.Runtime.InteropServices.Marshal.GetActiveObject("Inventor.Application");
Inventor.Document doc = invApp.ActiveDocument;
Inventor.PropertySet customPropSet;
customPropSet = doc.PropertySets["Inventor User Defined Properties"];
how to change the order of custom iProperties. I would like to group like iProperties together to make editing a bit easier.
Windows 7 Pro, SP1
Inventor 2012 SP1
Due to the nature of our business, I am not permitted to attach any files showing models or .idw environments of any actual work-related components.
we have a part file that has 2 custom iproperties in it.
Length and Width.
If I delete these properties its fine and the properties are removed.
However if I then save the file, the properties become available again.
Is it possible to automatically add custom iproperties using iLogic?
I have a rule thats adds text to a propery, but when I run the rule in an old partfile i get the error:
"Can't find a property named DrawingNo"
Is there something like:
"Create iProperties.Value("Custom", "DrawingNo")"?
Copy custom iproperties from one part to the other - possible?
View 6 Replies View RelatedI'm importing custom iproperties from an excel document into inventor using the code I've written below. I've figured out how to bring up a dialog box to select the excel file I need, but I'm completely stumped when it comes to selecting the sheet within the file. As it is now, I'm specifying the sheet in the code itself (Str. C). My goal is after selecting the excel file from the dialog box, have ilogic list all the sheets within the excel file, then be able to select which sheet I need using a radio box, list box or some sort of prompted entry.
DimfdAsOpenFileDialog=NewOpenFileDialog()
DimstrFileNameAsStringfd.Title="Open File Dialog"fd.InitialDirectory="C:"
fd.Filter="All files (*.*)|*.*|All files (*.*)|*.*"
fd.FilterIndex=2
fd.RestoreDirectory=True
[code]....
I'm using 2011 and I would like to add a drop down menu under the cost center box so I pick from a list of processes we use for purchasing. Is it possible to add a drop down list there?
View 1 Replies View Relatedhow to make a multi-value drop down menu in drawing iProperties?
I want to make a list with aluminum extrusion sizes where I can pick it's name from a list of names. Similar to the custom iProperties "Design State".
I have two part files: Part A and Part B. Part A contains a sketch block, Block A, which will be used as a basis for Part B.
I derive Part B from Part A using a "Derived Part" to bring in only the sketch block (Block A) from Part A. When I do this, Inventor sets every dimension in Block A to "Export" and creates a custom iProperty for it. Then the Custom iProperties list in both Part B and Part A is cluttered with every dimension from Block A.
Is there any way to prevent it from creating all of these custom iProperties?
Inventor 2013
I have a form that is loading automatically in my part model. where i write the part number, description, project and custom titles.
my questions are:
1 - when i write the part number i would like then when i click apply it opens the save box with the same part number.
2 - it's possible to check-in the file during the saving and keeping the file checkout?
3 - i would like that some of the properties would be transfer to the drawing, like the description and the project (this two are from the part properties.
4 - transfer also for the drawing the custom titles to the custom i properties of the drawing as pre fill in.
I am trying to export a user parameter that is a text string to a custom I property. I am able to export other parameters to custom properties that are numarical values. I export check box is missing on the text user parameter.
Is there a way to acomplish this with I-logic?
I am using ilogic in Inventor 2011 to update my iproperties when I save a .dwg file. I am having problems with some custom iProperties I have created that are of the type 'number' and are initially set to 0 (zero). After the iLogic rule has run and the user has entered a numeric value the type of the custom iproperty has changed to 'text'.
The ilogic code I am using is:
If iProperties.Value("Custom", "Nominal ID") = 0 Then
iProperties.Value("Custom", "Nominal ID") = InputBox("Enter The Nominal ID (Enter 0 if no value is available)", "Nominal ID", 0)
Custom_iProp_Nom_ID = iProperties.Value("Custom", "Nominal ID")
End If
I am using Vault 2011 and would like to map this property to a numeric property so I can perform <= and >= searches.
I'm using Inventor 2011 and when I go to change parameters using iLogic in an assembly model, (sometimes it is a component suppression, other times it is an iPart component change) it won't update the associated drawing file. I need to go into the BOM on the drawing and renumber the balloons, or change something else in order for the custom iProperties to update in the drawing template. If I just change the iPart component, then the BOM doesn't need to update making the renumbering of balloons redundant.
I'm using iLogic to update all of the iProperties and component references, then reattach balloons. What I would like to do is automatically update the custom iProperties drawing template fields, and renumber the drawing BOM.
Any way to use iLogic to create custom iProperties from the cells in an Excel spreadsheet (both text and numbers) for a .dwg template. The only thing even close has been a user who already knew how to do it and was having a different problem. I am using Inventor 2012 and Excel 2003 and have very little experience with VB. I currently have a family of assemblies, consisting of two parts linked to an Excel spreadsheet to control the various parameters for each variation of the assembly.
I need creating an iLogic rule that will:
Go to a specific tab (I have four different tabs/worksheets) in an Excel spreadsheet.
Make a specfic row of that worksheet the current row based on the part number used to generate the models of the assembly shown in a .dwg.
Use the contents of a cell in that row (text or numeric or a combination of both) to generate a custom iProperty for the .dwg template.
Use the custom iProperties to fill in the title block of the template.
I am having trouble with mass prop exporting to sheemetal parts. It did work for 2012 now its not happening iv2013. service pak 1.1
View 1 Replies View RelatedI'm trying to figure out how to create an iLogic rule that would create a Custom iProperties and put in what version of Inventor the file was last updated with.
View 8 Replies View RelatedI've been looking for a solution to remove the unit string ie Lbs, g, kg from the value given from a 'Mass' value in a text string.
As you may all know, creating text and having a 'physical property - mass' value...the unit string is there...
Lots of people on here have the problem...no-one has got a solution.
Until now...
Basically...open the part you need to get the mass property of in your text string.
Follow the instructions on this webpage...this is the first part...
[URL]
Basically, this creates a Mass property value in the parameters table that you can call on as a text parameter.
It's similar to the custom iproperty model - mass but NOT the same.
Once you have done this, you can go to the drawing of the part and create a text string in the drawing and call it up as shown in this procedure. BUT it still has the unit string.
Here's the best bit that you want to know...
To get RID of the unit string...open up the part again from the drawing...click on the parameter icon...find the user parameter...in the Nominal value column, right click on the value and you get a pop-up that gives you 3 options...
Custom Property Format, Make Multi Value & Delete Parameter.
Click on Custom Property Format.
The pop-up window comes up...showing you the property type...in my case...the 4 left columns read Text, g (grams), Format & Precision...
On the right hand side I have a Preview of the text...then 3 check boxes...Units string, Leading Zero's, Trailing Zero's.
Units string is checked.
Uncheck it.
Close it...Save your part...go back to the drawing and hey presto!...the text now shows the weight you require as a straight value...no units!
I have had a dwg. template that I have used for quite some time. I recently decided I needed to update it. In doing do I added a new sheet and modified an existing title block to use on the new sheet. Now the new sheet is there when I start a new dwg. but the names are still there from the modified title block. If I open the template directly its all correct, if i start a create a new dwg only parts of it are correct. I've tried changing my styles to read/write and tried to save it as many different ways I can think of but it just won't cooperate.
Windows 7 64 bit
16 GB ram
Intel i7 2600 3.4 ghz
AMD radeon HD 6450
PDSU 2013
In trying to establish the tongue weight on a trailer modification, which inventor analysis tool would I want to use. I tried Stress analysis employing a teeter block but that only showed deflection caused by the various weights and not the affect of gravity. The gravity feature required data I don't have at present but before going through another learning curve I think it best to verify the appropriate direction.
View 8 Replies View RelatedI want to make popup the i properties windows to fill or change in 2 ways:
» when creating a new ipt, iam and idw
» just before saving all 3
the properties I want to validate are
- the title not filled
- if there is more than one line filled in comments
I am opening, using VBA, the iProperties "Pop Up" box, using the following code....
ThisApplication.CommandManager.ControlDefinitions.Item("AppiPropertiesWrapperCmd").Execute
If it is possible to open the iProperties "Pop Up" box at a specific Tab, for example, "Physical" or "Status" etc?
Is there any way to add an "iProperties" item to the context menu in the drawing environment, so that I can select a part on the drawing and access its iProperties, instead of having to "Open, edit iProp, Close," for each individual part? - Using Autodesk Inventor Professional 2012
View 2 Replies View RelatedAny way of having 2 files with different file name but identical designs what automatic updates the other one?
I need the same valve design with different materials, stock number and part names but I would like to make sure that both files are always updated to latest rev. Without having to remember to do it my self every time.
We are using vault?
Is it possible to create a new TAB in the standard iProperties dialogue box for Inventor Models and Drawings? I want a completely new TAB to hold unique company information fields without having to create Custom Property fields.
View 2 Replies View RelatedWhile in assembly, i would like to select a subpart and be able to clear or delete the value of ex description without opening the part file.
I can delete properties in custom prop but i cant do it in description....
I've use design tracking properties but to no avail....
In the past we filled in our changes, we did on the part, in the iProperties of the IDW. In the IDW we use some Custom iProperties for this. That's not usefull because you want this data in the 3D-model. Now I have written some code to automate this, which works really great. This code works in the IPT as well as the IDW. But what I want to achieve is: When my IPT is the active document, I want to read out the iProperties from the IDW to check if there is already filled some of these properties, because I have to deal with 'old' documents as well.
So my basis question is: How can I read out iProperties from an IDW into the IPT. I have found lots of solutions which go the opposite direction, IPT -> IDW. I want IDW -> IPT.
