AutoCAD Inventor :: DWG Template Modification
Oct 4, 2013
I have had a dwg. template that I have used for quite some time. I recently decided I needed to update it. In doing do I added a new sheet and modified an existing title block to use on the new sheet. Now the new sheet is there when I start a new dwg. but the names are still there from the modified title block. If I open the template directly its all correct, if i start a create a new dwg only parts of it are correct. I've tried changing my styles to read/write and tried to save it as many different ways I can think of but it just won't cooperate.
Windows 7 64 bit
16 GB ram
Intel i7 2600 3.4 ghz
AMD radeon HD 6450
PDSU 2013
View 7 Replies
ADVERTISEMENT
May 18, 2012
Is there any easy way of adding custom Iprops to previously created parts and assemblies? A macro or something that could set up additional lines without having to go in and type them out all the time?
View 5 Replies
View Related
Apr 12, 2012
In trying to establish the tongue weight on a trailer modification, which inventor analysis tool would I want to use. I tried Stress analysis employing a teeter block but that only showed deflection caused by the various weights and not the affect of gravity. The gravity feature required data I don't have at present but before going through another learning curve I think it best to verify the appropriate direction.
View 8 Replies
View Related
Jul 19, 2012
I've run into an issue with the Content Center customization. I easily understand how to manipulate the table to create parts with our part numbers, different material spec, & other predetermined aspects of the included templates that were included with the Inventor 2012 update. The issue I'm running into is that we would like to add or modify the original part the table is referring to.
In my example pics there is a bushing that I would like to control the hex nut size on. In the model it was created with a tangent constraint within the sketch instead of a linear dimension from the two flat surfaces. I would like to change that, but keep getting error messages stating:
View 1 Replies
View Related
Jan 23, 2012
Converting a default part template to a custom template?
View 1 Replies
View Related
Oct 4, 2012
Our customer supplied us with an Autocad template, complete with attributes, that I would lite to use as an Inventor template.
View 3 Replies
View Related
Nov 26, 2013
My code mirrors a selection by either the x-axis or the y-axis. It is working fine. Except, the drawing shows the result, when I move my cursor to the active dwg.
How can I refresh my drawing, direct after modification of a block? I use the code below to mirror a selected block by a button on a docking pallette:
private void btn_Vertical_Mirror_Click(object sender, EventArgs e){(new Modifikation()).Mirror("v");}
the code, which is called is:
public void Mirror(String axis = ""){//---------------------------------------------------------------------------------------------------------------------------------------Document dwg = Application.DocumentManager.MdiActiveDocument;Database db = dwg.Database;Editor edt = dwg.Editor;//---------------------------------------------------------------------------------------------------------------------------------------try{Auto
[code].......
View 6 Replies
View Related
Nov 21, 2012
When an alignment needs to have stationing modified, what is the best process for this when a proposed grade line and corridor have been established? I know the proposed grade line can be edited via edit profile geometry>profile grid view.
But what from I have found each station has to be modified individually, which is cumbersome. I would hope to be able to modify the proposed grade line by changing only the beginning station and the rest would update, similar to the alignment.
C3D 2011, (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
View 8 Replies
View Related
Feb 4, 2011
I have 4 computers sharing tool palettes on a network. Whenever a user updates the palette with a new block, he has to export the .xtp file on the network and every other users has to reimport the palette in order to see the changes.
We're in the middle of a big clean up since we just got our new Autocad 2011 license and the palettes change pretty much every day, whenever we find time to reorganize it.
Is there a way to skip the export/import part when modifying a tool palette? I mean we are all using the file on the network right, so why doesn't it update on modification? At first I thought the palettes would update on startup, at least, but it seems that every single user has to export first and then import the .xtp file every morning or so.
It feels like once the palette on the network has been imported, the modifications we apply on the said palette are local, as if autocad would copy the one on the network instead of running it live, which makes it harder to keep it synchronized on every machine.
there's a way to work around that export/import sequence and get this whole palette thing to work in sync.
View 9 Replies
View Related
Jun 25, 2013
Is it possible to change the parameters of a subassembly - for example in an assembly comprising several subassemblies, can I change a parameter in Subassembly.LaneOutsideSuper, for example, to vary the Lane Width from 4m at CH90 to 3.25m at CH160m and keep it at 3.25m for the rest of the corridor.
I am new to Civil3D.
View 3 Replies
View Related
May 4, 2012
i just come across a lisp and i find it quite usefull,but then i wish to modify it abit. I have attach a sample of the lisp and jpeg to show what i require.basically all i need is the leader to be in multileader type. Is it possible? Additionally, can i set by default the coordinates to be shown in just 2 decimals?
View 9 Replies
View Related
Dec 7, 2012
Found this routine online and am hoping to modify it to my needs, just not sure how to proceed.
It exports the text out of the dims into an excel file, the issue I have is that it automatically opens a new book every time you run the lisp with the original workbook open.
I am trying to get it to automatically insert the next set of numbers on the row below the first pull.
View 9 Replies
View Related
Jun 9, 2011
Can you import layers from a template to a drawing with a different template
View 3 Replies
View Related
Jan 6, 2014
I'm recently using inventor a lot. But now IM try to make a .IDW template with my own line styles and thickness and stuff. This is what I do:
I open an exciting IDW file. I go to manage and click style editor. Then I create a new style. Called test style. I make sure I activate my new style and I go to layers, where I change the line weight from 0.51mm to 0.25 mm (example)
I save my change and close style editor... After that I save my copy as template (called test 6-1) and close the drawing. I open inventor and create a new file. Select the template I created. I get this style conflict.... I don't fully understand this error... How can I fix this problem?
When my new template opens, I check the line weight by the style editor but the weight detente change... Its still 0.51 mm.
View 4 Replies
View Related
Feb 12, 2013
Made some minor changes / updates to our .idw template and would like to update previous .idw's to the new template. Can this be done automatically? Is this done in styles?
I have opened previous .idw's and checked for updates in styles and none are shown. The changes/updates are to the title block and revision table. New drawings open with the new template changes, but we would like those changes to any previous drawings as well.
View 2 Replies
View Related
Feb 23, 2012
I'm having a problem migrating a custom idw 2011 template to 2012. When I try to open the template I get the message that I need to open and then explicitly save, but I cannot open the file. I've checked the file locations in options and in the projects, and all is correct.
View 2 Replies
View Related
Dec 5, 2012
I want to convert our drawings from one template to another (attached). Conversion is from .idw to .dwg. What's the best method?
Dell T3500
Intel Xenon CPU
15 MB RAM
64-bit operating system
NVIDIA Quadro 5000
View 2 Replies
View Related
Mar 25, 2013
How can I control placement of an DWG when i place it in a IDW. I can't see that I have a possibility to control that. How can I do that?
View 6 Replies
View Related
May 23, 2013
Is there anything wrong with creating a new template this way:
1. Create a new model for a new client.
2. Create new drawing based on the standard template.
3. Bring in model views and create new title block, notes, symbols, etc. specific to new client.
4. Save drawing as a client specific template in my template directory.
5. Open new client template and erase all drawing views but leave notes, symbols, title block, etc.
6. Save.
The question is, doing it this way, will it cause problems? Will the drawing views somehow still be linked to the template? Should I erase the drawing views BEFORE saving as a template? Is there a better way ti create a template?
View 4 Replies
View Related
Apr 11, 2012
I created a template file for the sheet material with the specified type of material, sheet thickness and the radius of bending. Placed in the Templates folder. Call the template from the menu, HED, and all settings are reset to Default? How to make a new file so that all settings are saved?
View 3 Replies
View Related
Oct 5, 2010
I have crated a drawing of the part. Now I must be updating the drawing template. How I can update the drawing templates to old drawings?
View 6 Replies
View Related
Aug 28, 2011
I included a VB code in our drawing template, but then I get the "Warning: You have a non-empty VBA project.." message. If I copy the code into iLogic, I just get an error message. Why it runs fine as a separate macro, but doesn´t work in Inventor, or how I can include the code into the template? URL....
View 2 Replies
View Related
Mar 18, 2013
Can the description be changed for custom templates (see attached image). If so, how?
View 2 Replies
View Related
Jun 15, 2013
I'm using a template file (part with just a drawing in it) for the basis of a few parts.
In one of these parts I use the template sketch for an extrude. After that I would like to use it again for some other extrude.
But I can not reference the drawing again. Normally I can 'share'a sketch. But somehow a sketch from a template file can not be shared. How can I use the template sketch for a second extrude?
View 4 Replies
View Related
Mar 25, 2013
I need to make a Template.idw file with my company logo. and i did that by using insert image options. Then i saved it as template file and when i try to use that tempate file for new drawing, it shows a message that the reference file path is not the part of active project. So there is any option availabe like copy image and paste in template in place of insert image with link option?
Inventor Professional Suite 2010
Windows 7
View 9 Replies
View Related
May 16, 2012
I was trying to make new .idw (inventor) templates based on .dwg (autocad) templates. For some reason the type face Simplex is not showing correctly on screen and on print outs. I have checked on various machines and result was same.
View 3 Replies
View Related
Oct 19, 2012
How do I set up the templates in 2013? we just migrated from 2012 and now some of the templates are not showing up. When we installed the vault we created a drive that the vault resides in. The templates also reside on this drive but outside of the vault. in 2012 when I selected the icon to create a new part/assy/drawing I would get the following drop down menu:
now in 2013 we have a new and imporved splash screen with more options, I think:
However as you can see, there is nothing to choose. If I use the drop down arrow this work, but not much as I have the 4 standard part, assy, drawing and project icons appear. We have used the options menu and changed the file search paths to point to our template folder but we still do not have any options in the new menu and the drop still does not show options for sheetmetal or square parts. The drawing does open with the correct template though. I have also opened each template in 2013 and saved it so it should be migrated to the new format. but that has not worked. How to set up the new splash menu to work?
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
View 6 Replies
View Related
Dec 12, 2011
Still working with INVENTOR 10.
When editing the Title Box in a Drawing Template and attempting to insert a LOGO (bmp file) the logo file justs show an icon for the Logo and not the Logo
View 3 Replies
View Related
Jun 21, 2013
On my company's default drawing template, I have a text block on there with some drawing notes. We often edit some of the notes on the end at each drawing so I didn't create it on the "title block" layer, rather it's on the "top" layer. I also added (in the template) a revision table with Rev. A being "Released for Production" (because we are weird). How can I constrain those on the sheet so when I change sheet size, they stay in the same position relative to the corners of the sheet?
View 1 Replies
View Related
Nov 6, 2012
A way to create a copy of an open part by starting from a template part file and recreating all the features?
Is there a simple way to copy a sketch definition from one part to another using either VBA or VB.net? Is there a way to access the browser so the order of feature creation can be copied?
View 2 Replies
View Related
Aug 2, 2013
How do I specify which template my imported components use?
View 7 Replies
View Related
