AutoCAD LT :: Custom Text For Custom Buttons
Dec 18, 2012
how to place a 2 line text under a custom button.I tried to mimic some of the std button but it didn't work.
Attachment 1 is the std Tool Palette and User Interface buttons in the Manage Panels.
You can notice that the name is User Interface on the left and UserInterface on the right.
Attachment 2 is my button, on the left I CANNOT edit the name and on the right any changes automatically edit the left name.
At the end I would like my button the appears with one line: Extract and under Maint.
View 9 Replies
ADVERTISEMENT
Mar 12, 2012
I have been using AutoCAD 2006. Our company is switching to AutoCAD 2012 LT. I want to be able to add my custom toolbar buttons from the 2006 to the 2012 LT custom Ribbon Tabs & Panels. I have figured out how to make the custom ribbon, tab and panel. I just haven’t figured out what I need to do to get the old stuff to where I can add them to the panels.
I have custom 2006 buttons with and without flyouts.
View 9 Replies
View Related
Oct 24, 2012
I am trying to make some custom buttons to change some text to a different layer and then change the text height.
I cannot figure out the command line alias for "Text Height" to enter it into the macro.
I have tried the "scaletext" command but I cannot figure out how to add this command to the "Chprop" command on the macro line. The command seems to stop before performing both actions. What am I missing? Here is the button macro so far ^C^Cchprop;la;GasAban;c;g;;scaletext;c;s;12;;
View 5 Replies
View Related
Mar 16, 2012
When I make any changes to my custom toolbars, every custom toolbar that I have made will appear on the drawing after I click apply and OK. Then I have to go through and X out about 100 toolbars. I would like to be able to turn all of the custom toolbars off at one time. Then only turn on the ones that I want to use.
View 7 Replies
View Related
Mar 14, 2012
I have made a 2012 LT custom ribbon and a custom panel. I have transferred buttons from my autocad 2006 to my 2012 LT. They work just fine. The probem is that in 2006 I had drop down buttons to save toolbar space. I want to be able to add the drop down button feature to my new panel. I do not see how to create that type of button, so I can add the regular buttons to it and have one drop down button with those commands in it.
View 9 Replies
View Related
Feb 21, 2013
Is there a way to create a blank toolbar to add custom buttons to?
View 1 Replies
View Related
Nov 23, 2010
How do I create a ribbon tab and button for my application, any sample code?
How do I interact the button click with my application?
View 9 Replies
View Related
Nov 21, 2013
I am using AutoCAD 2014 and trying to create custom buttons as a short cut link to open external files, such as a link to company standards, osha, or any file in general. I basically justa want to be able to open the file from with-in autocad. Like a hyperlink without having to click an object.
View 7 Replies
View Related
May 18, 2012
I would like to build a custom button that mimics the FDO - Save as AutoCAD drawing functionality. Clicking this button brings up a wizard with too many clicks for how often the users will do it.
They will not want to load a script so a custom button is required. Also, I need to be able to dynamically set the new saved file name based on the source DWG file name.
View 1 Replies
View Related
Mar 18, 2012
I'd like to create a video with an awkward resolution: 400x70. I don't see how to do this in VS5. Even when I go to the "Share" option, my custom resolution buttons are greyed out. Is there a way to do this?
View 1 Replies
View Related
May 29, 2012
I'm working on creating a disc menu in VS Pro X4. I've customized several parts of my menu (background, music, text, etc.), but I can't figure out how to change the little highlight icons that appear next to the selected menu options. Is it even possible to customize these?
View 2 Replies
View Related
Feb 21, 2013
When inserting a content center part for which we have to choose a material, we would like to have a custom material as a default (material with name: "No material selected"). So when selecting no material for this part (for example when the user forgets to select a specific material), the default material (in this case material "No material selected") will be active. In this way, we can see in one view across the BOM which parts have no material assigned yet.
How can this be achieved in the content center (editor)?
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
View 2 Replies
View Related
May 16, 2013
When using Inventor with Vault, we have a problem when categorizing custom content center parts in Vault. In short, custom content center parts are incorrectly categorized as "Content Center" and automatically released - as there is no property that we can use to identify these files.
I need iLogic code to trigger when custom content center files are created/saved, wich adds the following custom iproperty "IsCustomContentCenter=True".
View 1 Replies
View Related
Nov 27, 2013
When I drag a previous custom command into an existing custom tool bar and edit the custom command (then rename the command in the Name and Command Name) it also changes the previous custom command that I originally drug into the toolbar. What am I doing wrong?
View 2 Replies
View Related
Apr 4, 2013
I am trying to create custom Materials in Inventor 2013. I have been able to create the custom appearances I want use on the materials and store them in the Inventor Materials Library.
After creating the custom appearance, Ive created new materials. When I try to change to new material appearance from default to my custom appearance, upon hitting the 'apply' button I get an error message which reads, 'failed to updated style'.
View 1 Replies
View Related
Nov 9, 2012
We are a firm using ACAD 2011 w/ a custom toolbar that has an Auto Purge "tool" it currently deletes duplicated layers, reg ops, duped scales etc. we are wondering what else it can do (or any other tools that may be of use) or how can we get it to do more for us, like restrict referencing files from "unwanted" locations and any other tools that are essential to reducing the size of a drawing so its now so slow
View 3 Replies
View Related
Nov 1, 2012
Is there a way to save a custom artboard setup with a custom document profile in illustrator cs5? I do technical illustrations and our page size is odd (7.19 x 8.96. It the size that our Framemaker layout is set to.). I have a custom document profile that I use, but I use the grids all the time so that my callouts are spaced out evenly around the art. I would like to have a way to set the artboard up so that the grid will align to the center of the artboard everytime I turn them on. Right now they always start from the top left and when I center art in the center of the page, the grid spacing isn't the same on each side of the art. I just want to be able to open my document profile, turn on my grids, have them start from the center, and I can get down to business. As it is now I have to go into my artboard settings and manually adjust the grid to the center. Small annoyance, but it still annoys me. I have tried to save it a few different ways, but nothing has worked. Maybe there just isn't a way.
View 4 Replies
View Related
Oct 21, 2013
Can we place a custom menu and commands in Adobe Illustrator and invoke custom actions? The need for us is to call a C# DLL from these menu commands. I see C++ support but none on COM or NET support.
View 2 Replies
View Related
Dec 28, 2004
I tryed searching for this on google and the forums but I never got a strait answer, what I need is to save some skin colors that I made into swatches, but I dont have the time or patience to delete all the other swatches in my pallette, anyone know a way of just saving my swatches i made.
View 3 Replies
View Related
May 25, 2012
My ultimate goal is to have a virtual human model that I can re-size parametrically to reflect real-world measurements. I've used MAX to make architectural models and scenes so I know how to manipulate basic shapes in MAX.
how to make some sort of basic-custom geometric shape and control that shape parametrically, like the built-in "Box", "Sphere" and "Cylinder" objects.
View 1 Replies
View Related
Oct 24, 2013
When I create custom brushes and custom brush dynamics is it possible to associate one with another? For example then I select one of my custom brushes is there a feature in gimp to load corresponding dynamics preset automatically?
View 1 Replies
View Related
Jan 13, 2012
I'm using AutoCAD LT 2012 and our client doesn't want/like sheet sets.
One item I'd love to have is the pg. number automated. In the current title block it's just text not an attribute. Is there a way I can take only a part of the file name and insert it as a field?
For example, the file name is DW_12321_12.dwg the last part of the name is the sheet number. Can I exclude everything but the 12 and insert just that into the field?
View 5 Replies
View Related
Feb 3, 2012
I have some custom texts that I use. A week or two ago they started showing up looking different and certain symbols like ' weren't showing correctly (they were displaying ? instead).
When I went into Text Style, sure enough the style being used was pointing to a file that either didn't exist or wasn't the proper format. An example is that my HS text was pointing to the Font Name HS.TTF instead of Helvetica 53 Extended which is installed as one of my Windows Fonts. When I changed the Font Name to Helvetica 53 Extended everything looked okay again.
My problem is that even after hitting apply to this change and closing the Text Style form when I open a new drawing HS text is set back to HS.TTF and not displaying properly. How do I go about permanently changing this value back to what it should be, and how did it get changed in the first place?
View 3 Replies
View Related
Mar 22, 2011
I've been customizing acad.lin like a maniac for the last couple of days and there's a recurring problem that I can't resolve by myself.I have this line...
*EX-DASH,[G] Existing - - EX - - - - EX - - - - EX - -
A,.125,-.0625,0.127,-.254,["EX",STANDARD,S=.127,U=0,X=-.127,Y=-.0635],-.2,.125,-.0625,.125,-.0625
The result is similar to...
- - EX - - - - EX - - - - EX - - - - EX - - - - EX - - - - EX - -
Let's say that the pattern of the line ("- - EX - -", because that's the part that's being repeated) takes 50 units to display at a given scale. I draw a PLINE and one section of the line is like 75 units long. If the line I'm drawing can't contain the pattern of my custom line, it won't display correctly. Given these numbers, the pattern would only display right once (75 / 50 = 1.5).
I get that and it's ok. HOWEVER, one thing I don't get is why autocad displays the pattern once and then fill the rest with a continuous line. It's okay for all my continuous custom lines with text because it keeps the same base line and it feels transparent (and it's also the reason I never realized it was reacting this way until I started working with dashed lines).
Example: I want to display "- - EX - - - - EX - -" but would only have space for "- - EX - - - - E". Acad will display "- - EX - -" once + continuous line for the remaining space.
I know that if there's no space to fit a second "EX" it can't be displayed, and that's all right, but how come it doesn't fill the rest of my line with dashes instead of a continuous line? With PLINEs, every time I turn a corner, I get this continuous line segment on each corner before it starts displaying the dashes (because I can't always draw lines that fits perfectly the pattern).
How to force it to display dashes when there's not enough space to repeat the pattern one last time?
View 2 Replies
View Related
Jan 8, 2013
I made a custom linetype to represent a pipeline. The line is abbreviated by 5 letters. My problem is when I reach and curve in the pipe (an elbow), the text string does not follow the curve. It remains straight for the remainder of the text. Is there a way (autocad 2013) to have the text follow the path of a curve?
edit: I saw one similar topic from 2008 in this thread: [URL] and the best response there is the one posted by eldon where you break the code down to each letter. Still, the picture in eldon's post makes the text a bit jagged. Have any changes been made to AutoCAD since this post that make this easier?
View 0 Replies
View Related
Feb 18, 2011
I made a custom line type called EX (for existing pipes) which looks a little bit like this: - - - EX - - - EX - - - EX - - -
Line works great when I draw from left to right. However, when I draw a line from RIGHT to LEFT, the text displays upside down a little bit like this: - - - X3 - - - X3 - - - X3 - - - ("3" representing the mirror image of "E")
Same applies when drawing from bottom to top, or top to bottom. I totally understand the behavior here, and TBH I think it's OK it behaves that way.
Let's say I'm drawing existing water pipes going in all directions with a polyline. Is there a way to make the text display upward no matter what direction the pline is going?
View 9 Replies
View Related
Aug 13, 2012
I am looking for assitance with the VB code to change the text style within a custom table when it is created from a VB standalone program. I am using Inventor 2013 and VB 2010 Express.
I have a customtable that is created within a .idw, and I would like to have the data cells set to "Table_Cells" style that I have created. I cannot find anything in the help file with a sample code to build off.
I figure it's got to be something with oCustomTable.DataTextStyle but beyond that I am lost.This is what I have, and VB is kicking it back in my face.
Dim oTextStyle As TextStyleoTextStyle = oCustomTable.DataTextStyle.StyleType("Table_Cells")
Error 2 'Public ReadOnly Property StyleType As Inventor.StyleTypeEnum' has no parameters and its return type cannot be indexed.
View 3 Replies
View Related
Apr 18, 2013
I've created my first line type (woohoo!) but the rotated V that I used as an "arrow" won't center and I'm having a difficult time understanding why so that I can fix it. I am aware that linetypes like the one I created exist but I wanted the arrows a specific size and distance apart which I couldn't do with the existing linetypes available to me (also I really wanted to try creating a custom one).
In the attached picture:
-the green line is the finished custom linetype
-the red lines are polylines
-the blue text is rotated 90 degrees, set to a text style titled Linetype (simplex font, not annotative, height set to 0 and width set to 1.0), and Justify set to Bottom Center
linetypes-Model.pdf
The finished linetype code is:
*STREAM_LINE_W_ARROW_BIG,Stream_Line_W_Arrow_Big
A,.392629,["V",Linetype,y=-.07619,s=.2,u=90],.207371,-.144393,.011213,-.138787,.011213,-.138787,.011213,-.144393,.392629,["V",Linetype,y=-.07619,s=.2,u=90],.207371
Also, this the first time I've attached a picture, I'm not sure that I did it correctly.
View 2 Replies
View Related
May 14, 2012
MEP 2013
I have a three point arc, and the custom line type has text that is not only inverted, its backwards.
View 4 Replies
View Related
Jul 19, 2012
How do I create a custome line type with alternating text as description like this:
-------- - e -------- - (oh) -------- -------- e
View 6 Replies
View Related
Sep 15, 2011
I have been trying to find a method to extract custom properties from the custom property bag.
I have been able to extract the property value, using the "GetProperty" and the associated "GetValue" method, this method works when I know exactly what property name I am looking for. What do you do when you don't know the property name?
here is my code snippet..
dim myProps as acsmcustompropertybag = mysheet.getcustompropertybag
dim myProp as iacsmcustompropertyvalue = myprops.getproperty("SOMENAME")
dim myPV as string = myProp.GetValue
what I want to do is:
dim myProps as acsmcustompropertybag = mysheet.getcustompropertybag
dim myPN as string = ??????????.tostring
dim myProp as iacsmcustompropertyvalue = myprops.getproperty(myPN)
dim myPV as string = myProp.GetValue
View 6 Replies
View Related
