AutoCAD Inventor :: Loft Won't Work With Important Rail
Dec 7, 2012
I'm trying to produce this loft but the rail I really need it to follow won't produce any results. The other ones on the 3d sketch will work just fine but not the regular sketched one. It seemed to work when I made the rail a straight line but I need it to follow the edge of the surface which is a line, tangent to small r3 arc, tangent to line and connected through projective geometry from the original surface sketch.
View 2 Replies
ADVERTISEMENT
Sep 14, 2013
I edit Sweep1, select path with guide rail, try to select the curve in 3D sketch 2, but don't succeed.
First, it selects both, the path and the guide rail, and when it offers me to select the path alone, i don't know how to call it in english, again it gives a warning.
View 8 Replies
View Related
Feb 27, 2013
Is it possible to define custom Rail Types in Rail Track Layout Utility for AutoCAD® Civil 3D® 2013?
There is only combobox with predefined Rail types 49, 54, 60.
I found: "The rail type defines the standard turnout types (e.g. 49, 54, 60 etc.)or other user defined types "
, also there is mentioned, that "...pre-prepared turnout types that are written in the XML file ara_switch.xml"
I can't find that ara_switch.xml file.
View 2 Replies
View Related
Jun 13, 2012
We have a project that has been upgraded to Revit 2013. When creating railings using the new railing types, top rails and hand rails disappear/are not visible seemingly at random. For instance, when a railing is created that contains railing profiles in the non-continous rails dialog box in addition to a top rail, the top rail and extensions are not visible in plan, but the rails created in the old non-continous dialog are visible.
This seems to occur only in our upgraded file. New projects seem to display the top rails and hand rails consistently.
Also, with railings that contain a "Wall" type extension, the extension return occurs at a 90 degree angle even if it is set to have a fillet. Further, in some instances, regardless of whether the rail is flat or sloped, the end wall extension return will display as two separate rectangles overlapping (i.e. it looks "broken"), instead of a clean, continuous railing. This seems related to the "direction" that the rail sketch line is drawn (a line drawn from the bottom of the screen to the top will have a broken railing, one drawn from the top of the screen to the bottom will not).
I know that scolding the Autodesk software developers isn't going to change anything, but I feel the need to blow off a little steam. The railing and stair "improvements" for this release are really not worth much. It's still much more time consuming (and frustrating) to model these elements, and with poorer results graphically, than it is to simply draw them. It's still not possible to dimension them properly, place balusters where you want them, make multi-level stair towers join properly, get the up/down arrows to display correctly, and a host of other issues. It's incredibly frustrating and baffling that there are so many issues with such a core component of the software's functionality.
View 9 Replies
View Related
Nov 6, 2012
am using Inventor 2012. Is there any way to select two rails when sweeping? One for the x and one for the y. I can only select one rail. If I choose Profile Scaling X & Y, it does not sweep the way I want to.
View 1 Replies
View Related
Jun 29, 2012
We are developing an equation driven 3d spline using VBA.
It generates a 3D spline, guide rail, and tool profile, but we're having trouble figuring out how to do the actual "sweep with guide rail" using the API.
Attached is an .ipt of the shapes our program is generating automatically. The problem is we are having to manually create the sweep after the geometry is created.
How can we automate the sweep with guide rail process?
Autodesk Inventor 2012
View 3 Replies
View Related
Jan 4, 2013
I'm trying to apply the right constraint in stress analysis environment.
How would I apply the right constraint? And to which face of the wheel or axle should I apply the constraint to get right results.
If I'm applying the sliding connection to the face of the wheel in z direction, the model will stop stress analysis with an error of "not enough constraints"
if I apply the sliding constraint to the inside of the wheel on the surface of the circle, I get the result as attached. I get 0 reaction in the Z direction which is wrong and should be zero reaction in x direction. How do I get it right?
The correct way to me would be a constraint that would only take forces in the -Y direction, same direction as gravity.
The wheel should not have any other reaction than in the Y direction. Hoe do I define that constraint? In my model the wheel are free to rotate on the axle.
I'm attaching both the general arrangement and the reaction report.
View 2 Replies
View Related
Sep 18, 2012
I am trying to model a forged steel table base so I can create some tooling to reproduce it. See the attached photo of the base. I am able to sweep along my 3D projected sketch path but there is a twist at the center that I believe I need a guide rail to control. I have tried to draw a rail but it fails.
I suspect I am not drawing my guide rail correctly as to create the slight twist. I was considering drawing a shallow helix along the 3d sweep path but not sure that this is the best direction to head next. I have attached the .ipt with the sweep (without guide path being used).
View 5 Replies
View Related
Oct 24, 2012
The wheels on the side need to roll inside the guide rail. I can let them roll in each part separately but not in the entire rail.
I already tried with transitional constrains but then inventor says that there are some problems.My project needs to become a sectional gate so there's going te be lots more than just 2 wheels in it..
View 5 Replies
View Related
Feb 27, 2012
I need to shell out a Loft in the attached IV 2012 part file.The Loft i tried also as a new solid but the shell also cuts into the cylinder ( revolution 1 ) . I only want the 2 sides and bottom of the Loft to be Shelled, not the cylinder. What do i need to change to get the shell to work?
View 4 Replies
View Related
Mar 21, 2013
I had a hdd crash, I took the hdd to data recovery and they did recover something but some of the important dwg files are invalid.
From my understanding, computers use two files: pagefile.sys and hiberfil.sys to store data used at a given time, for quick access (and other reasons). I have these files from the broken hdd but I don't know how to open them.
How they can be opened? How to successfully recover dwg files from them? the computer does it all the time so there must be a way.
View 1 Replies
View Related
Nov 7, 2009
I'm loft retarded. What I did here was loft to a tangent work plane, then did a sketch on the top surface and extruded the shape that I want. There has to be a better & easier way.
View 9 Replies
View Related
Nov 6, 2011
I have a cylinder on top of a curved surface; I want to make the cylinder land adaptively to the surface, so I projected the circular face of the cylinder in the surface, which ended up being a 3D sketch. I tried to loft a solid between both curves, but it always gives me errors. Some examples are:The attempted operation did not produce a meaningful result. Try with different inputs.Multiple disjoint loops found in a profile section.
I have had success when trying to do the same thing with curved surfaces in two dimensions only (e.g. extruding a 2D curve), but I think the error is produced since the curved face I am trying to use belongs to an elipsiod.
View 9 Replies
View Related
Jul 24, 2012
Okay I've been building random things to teach myself how to use Inventor and right now I'm stuck on a rim I'm creating. My question is.. is there a way to copy and paste a lofted item since there are three parts to it (2 planes and 1 guide) because I need 4 more spokes and if I copy the loft it copies all three parts seperately. Then when I paste and orientate the small end of the loft to the plane I want it tells me "Unsatisfied Geometric Inputs".
View 4 Replies
View Related
Aug 29, 2011
I am having trouble trying to get the Loft-1 to run the same shape as Revolution-2 .Picture 1-1 shows how Loft-1 is slightly off centre to Revolution-2 at the top .could i model the Loft-1 and Revolution-2 using different tools in one command making it a smooth shape. Another problem i have is how do i make Revolution-2 at the end terminate into Revolution-1 smoothly.I tried using Loft but it kept getting fail message.Picture 1-2 shows where to terminate the end into the Revolution-1 body.
Inventor 2012
View 9 Replies
View Related
Nov 22, 2013
I have created a loft from 4 different sketches. Now I want to make a drawing with the front, side view and the dimensions of the 4 profile sketches from the loft. But I can’t find a way to put the sketches from the part on my paper. It works with copy-paste ;^) but this is not the way I want it (it’ll not change when I change the profiles in the part).
View 6 Replies
View Related
Aug 30, 2013
this message appear with "loft" between blade sections the attempted loft operation resulted in self intersecting surfaces.Try with different inputs
View 9 Replies
View Related
Jan 24, 2013
I was wondering if it is possible to make a surface loft go from 1 square section to 2 round sections.
So 1 ingoing section en 2 outgoing sections.
I've attached a simple drawing.
View 5 Replies
View Related
Oct 8, 2012
I am following the U-Tube exercise called "Emergency Light (Cabinet) volume 1". I am at time stamp 1 hour 26 minutes, exactly.
In the video they use a Loft command in order to cut a shape out of two sketches numbered 10 & 11. I have been copying exactly and am having difficulty at this stage of the model.
Is there any reason why I am managing to use the Loft command earlier perfectly but not at this point.
View 6 Replies
View Related
Jul 5, 2013
Using the image below, I want to removed the yellow extrusion up to the red circular edge, I assumed split tool would do this.
And I don't require this but i would like to show the splines on the ends to "feather" out to the round like the actual axle does. (this is just for aesthics) I have the extrusion done, But I can't figure out feature is requied to do this, loft?
View 7 Replies
View Related
Apr 16, 2012
I have a part that I'm trying to loft using 3d sketches for the rails will this work? Everything is fine till I try to add the rails, As you can see the loft works with out the rails.
Windows 7 x64
IV 2012
View 4 Replies
View Related
Jan 20, 2013
Im struggling coming up with a loft or sweep to get the design effect I need. see on the pic how the profile terminates to a point.
View 4 Replies
View Related
Jul 19, 2013
how to loft from 2d sketch to circular surface.
I have attached the model in this model I tried to loft Sketch 6 to Sketch 19.
View 2 Replies
View Related
Jan 3, 2012
attached are 3 files that demostrate what is happening when I select a profile to loft and the rails of the Surface and how it changes the profile and how I can get a straight back edge not bowed in like it did to the front
View 4 Replies
View Related
Apr 27, 2012
I want to create a solid using VB and loft definition.
I creat each time different planes that have a constant distance in x dimension and a steady rotation each time φ (deg).
On each each plane i sketch the same profile and that is happened for 360 deg.
The problem is that Loft is not made because a line of the profile must follow a line tragectory and all other points must follow a circular tragectory. Also, there is a problem from 180 deg to 360 because there is intersection of profiles.
The result must be a solid similar to snail shell but all the same solid, as a cylindar whith a half sphere in the bottom.
View 2 Replies
View Related
Nov 13, 2011
In the attached sample file if you edit the sketch in the first surface feature and change the dimension of 600 to 700, both the patch and loft features fail. It seems to be the curved edge that is the problem in both cases.
I cant see anything wrong with either way of modelling this so assume its a bug.This causes other problems in my real model with parts that reference these types of surfaces falling apart further down stream and is wasting heaps of $$$.
View 2 Replies
View Related
May 1, 2012
I made this part, which is a loft consisting of five symmetric squares. I plan on laser cutting each side, which would be exactly the same.
I can't seem to figure out how to make a flat projection of one of the sides. I have tried in sheet metal, but I don't use that feature in my line of work.
View 2 Replies
View Related
Jun 10, 2012
I am trying to loft a port shape for a project. I have been able to loft pretty much the same thing when part of a larger model but this time around it keeps giving me an error.
In the past i will loft the whole part then remove the inner portion to get the port.
View 5 Replies
View Related
Feb 16, 2012
I work at a car seat company, and we are just now, starting to draw in Inventor. I have problems drawing the seat belt. Here is my first try:
I have tampered with this one! From this angle it looks ok, but it isn't right. I have tried using Loft and Sweep, but with no good results! The seat belt is static in the shown position, but should be able to adjust onto another seat.
View 2 Replies
View Related
Jul 18, 2012
I am having to model a spiral slide in sections, and the top piece has this weird angled lip where the opening distorts. Im simply trying to take the face of the extruded part (in three sections) and loft it to the sketch on a different plane. And use the sketched curve as the centerline.
View 5 Replies
View Related
Jul 30, 2013
The rotor is composed of cylinder and a solid lofted between two 3D profiles. The attached part file is correct. To reproduce the error- change the "inlet_width" parameter from 12mm to 10mm or less (it is a parameter in "Blade Profile" sketch). On updating the part there will be infinitesimally thin solid layer on outer diameter of the cylinder.
-3D Sketch profile is a projection not from the "Blade Profile" sketch, but from a plane offset from it. This was first attempt at a fix. I suspected the original tangent work plane to intersect the cylinder.
-Creating a new solid body from loft was the only way to avoid errors such as "non-manifold solid".
I will be creating multiple versions of this part and I need to be able to safely adjust the "inlet_width" and "outlet_width" parameters. I will be grateful of any proposed fixes/workarounds to that glitched behaviour.
EDIT: The version is Inventor 2014 Educational.
View 2 Replies
View Related
