AutoCad :: Drawing Second Floor - Xref Command?
Aug 26, 2012
I've finished drawing my ground floor and now I need to draw my second floor. I read in a tutorial that the best way to do this is using the Xref command to know where is the walls, bathrooms and etc.
But I didn't get it at all. I need to draw my second floor in the same drawing. So what's the easiest way to do that?
After that I need to have a drawing with my second floor walls in dashed thin lines over my first floor. How can it be done?
View 5 Replies
ADVERTISEMENT
Feb 1, 2013
What is the command to create an X-Ref from my drawing?
View 9 Replies
View Related
Oct 16, 2012
How to solve this problem of 'Flattening a large 3d model (hospital ground floor) to a 2d floor plan drawing'. The 3d model was made in Rhino and I saved it as a .dwg file because Rhino kept crashing with the command 'make 2d' (file too large maybe :/).
I don't know AutoCAD 3d so now, I'm trying to just change the line layers and eventually plot it all, but sometimes when I save the progress.... AutoCAD will delete sections of my work sometimes :/
View 9 Replies
View Related
Jul 11, 2012
I have created room tags and would like to use the floor plan (with room names) as Xref. Is there a way I can locate the room names in one location per room on the main floor plan and then relocate the room names on the reflected ceiling plan and NOT move the room name on the main floor plan?
View 1 Replies
View Related
Aug 2, 2013
I am trying to insert OS Tiles into a drawing using the insert x-ref command. I have managed to insert 192 tiles but still need to add 29 more tiles to complete. When I try to insert another x reference AutoCAD just goes into a continual loop. Have to force AutoCAD to crash after ten minutes.
I am using AutoCAD 2014 MAP and have just had a new system built (i5 processor, 8GB RAM).
View 9 Replies
View Related
Mar 8, 2013
Im trying to draw this floor plan, Actually I don't understand the dimensioning thats why im having a hard time . I also want to know how to draw the walls on the plan.
View 9 Replies
View Related
Aug 10, 2009
I am trying to bind a floor plan into a drawing an I get the error: at least one of the specified xrefs failed to bind due to a problem with a proxy object. The floor plan was created by an outside company and we did the electrical engineering. Now that our files are due to the customer, i have to get our drawings to bind.
View 3 Replies
View Related
Jan 4, 2013
I am trying to xref a file in and when I select open through _XATTACH nothing happens. No subsequent dialog box opens up asking me to choose location, rotation, attach/bind, etc. The command just dies and I am back in my dwg.
AutoCAD LT 2011
AutoCAD Civil 3D 2012
View 6 Replies
View Related
Jul 21, 2011
I am relatively new to Revit. How I can place an Autocad drawing into Revit. Specifically I want to place a manufacturers AutoCad 3D drawing of an appliance (refridgerator) into my Revit floor plan.
View 2 Replies
View Related
May 15, 2012
I'm using AutoCAD 2010, working with a drawing created by someone else. I'm completely green with AutoCAD -- never used 2D CAD of any kind before. (I do have 15 year of experience with 3D CAD, but that's not much use to me now!)
The drawing is a shop floor plan, with each piece of a equipment as a block. I am moving or copying these blocks, sometimes to new layers. Sometimes, after I've moved a block to a new layer, I can no longer rotate it. The rotate command seems to work, but nothing happens.
Here's what I've tried so far:
* Checked if the layer is locked. (It's not; no layers are locked.)
* Tested other blocks. (They behave normally.)
* Toggled ortho mode on and off. (No change.)
* Closed and re-opened the file. (No change.)
* Closed and re-opened AutoCAD. (No change.)
* Rebooted. (No change.)
One guy took my drawing, "exploded the blocks" (whatever that means), and gave it back to me. The blocks would then rotate but, as soon as I started working with another one the same thing happened.
View 7 Replies
View Related
Sep 5, 2013
I can use xrefs on different project but right now on autocaddLT 2014 it doesn't work.
View 9 Replies
View Related
Dec 9, 2013
what the command that controls the fade effect for xref's in LT '09?
View 2 Replies
View Related
May 6, 2011
I just tried to do an xref and the command stops everything. I get no reaction from autocad. What is wrong?
here is an update: The Xref Palette is docked to my left side and when I hover to get it to flip out I click the DWG button in the left hand upper corner. Well nothing happens from there. Now, when I type -xref the command works at the command line. How do I get the palette to work again?
View 9 Replies
View Related
Jan 2, 2012
I know how to create a block and all that is fine, but looking for detailed simple lesson on how to create a Attribute. ( I guess thats what they are called). For instance, drawing a floor plan with different room names and etc, I know there is a way to make a circle or polygon, or square and then when it is inserted in the drawing, you just have to type the new name of the room, or the window symbol, or door number and etc.
By the way, I am using a student version of AutoCAD 2010. Also, if you could also add the keyboard shortcut alias's too would be a great deal.
View 2 Replies
View Related
Jul 12, 2012
I have an autocad drawing that has a building floor plan.
I need to "rotate the building 90 degrees" or "rotate the USC 90 degrees" in order to line the building up to TRUE project north (architect has a Revit model oriented to true north that I need to match when we combine our files in Navisworks)
I have tried DVIEW > Twist.. which I thought was it, it rotated my drawing, but the USC rotated with it. I tried the USCFOLLOW with no luck.
Also tried going into UNITS > DIRECTION and tried VP with no luck.
I understand that I can just select the entire floor plan and manually rotate it BUT, the building is not easy "shape" to work with, so it is next to impossible finding the "center" of my drawing to rotate it (I need this to be brough into Navisworks WITHOUT rotating the file again)
You would think this would be very simple to do and take 30 seconds. I have googled everything with no luck. I just need to change my True north
- doing this in modelspace
- needs to be align with a Revit model already oreinted to true north
- just need to rotate the drawing OR UCS 90 degrees, but can't find the "center" of the drawing
View 3 Replies
View Related
Aug 2, 2012
While working in my topo drawing I used the "reverse" command to flip all my linetypes (water, over head wire, gas) to show correctly. My topo is x referenced into my utility drawing and my x reference lines will not flip. i have reloaded, i have closed and re opened, i have regenerated. No luck...
View 3 Replies
View Related
Jul 15, 2013
A question about ex referencing. Can it be done within a drawing. In other words, can I can Xref the plan to another part of model space to then create the elevations in UCS, and then Exref the elevations from USC to a horizontal line.
This would be very useful in the sketch plan stage.
View 9 Replies
View Related
May 25, 2012
Suppose I have a Drawing Structure like:
MasterRoot
Root1
MasterChild1
Child
MasterChild2
Child
Root2
MasterChild1
Child
MasterChild2
Child
When I use XrefGraph xg = mainDb.GetHostDwgXrefGraph(true); in Code then I get all the Files as a node including MasterRoot (say count=6).
If I want to get Only direct Children (here, Root1 and Root2)(means count=2 only), then what i have to do?
View 6 Replies
View Related
May 29, 2012
Is there any advantage when inserting someone else drawing into yours to xref it rather than copy and pasting into your drawing?
View 1 Replies
View Related
Jan 21, 2005
I have an operator here who has an XREF that he brought in and it did not line up as it should with the remainder of the drawing. He then went in to the drawing being XREF'ed and reset the origin so that it would line up properly. When he did so, the XREF did move but no to where he set the origin. The XREF is still showing the insertion point some place other than where he has the origin set on his XREF'ed drawing.
View 6 Replies
View Related
Jun 20, 2012
I have a main drawing that I want to pull into another drawing as an XRef. When I try and attach the drawing as an attachment I get then message *Invalid* in the command line.
I have taken the drawings off the network and put them directly on my computer to make sure that it is not a network issue, but I still cannot attach the drawing.
View 1 Replies
View Related
Feb 7, 2012
I'm attempting to bind an xref into a drawing. I keep getting an error message: "Some objects in the specified xref failed to bind." Any reason why some objects couldn't bind? I've thawed all layers in the drawings..
View 3 Replies
View Related
Jan 30, 2013
I'm trying to get just the filename either with or without the .dwg extension for an xref given I already have its reference (BlockReference) and its model space (BlockTableRecord) all open for read; skipping accessing any BlockTable.
Im doing something like this:
Either get the XGraph and first node or prompt user for a block reference and check it's from attachmentStart active document's database transaction, get the BlockReference.Get the BlockTableRecord only with the BlockReference's BlockTableRecord-ObjectId property.At this point I can iterate through the model space and see the nuts and bolts of the xref drawing without actually changing anything after saving my drawing, even after committing a trasaction.So what I want to know is how to get the filename of the xref'ed drawing (i.e. Original_Drawing.dwg).
I'm looking at doing this without opening the referenced drawing as a side database and checking the filename.I can't debug right now, but is it. myBlockTableRecord.Database.OriginalFileName ?
View 1 Replies
View Related
Aug 2, 2011
I make a drawing1 with layers on it and then I made another drawing2. I Xref the drawing 1 as my reference , where I put the column of the building. When I open drawing 2 referencing drawing 1, my scale is different. my inches scale is becoming feet when referencing in drawing 2. I put the same LTscale and limits in both drawing
View 4 Replies
View Related
Aug 22, 2013
How does it work? I see in the properties after I high lite it. Annotative Scale no/yes. We xref one drawing into other drawing and the view scale changes. will my hatch look the same or will the smaller view scale look really big in the drawing.
View 1 Replies
View Related
Oct 6, 2008
I'm trying to detach an Xref from my drawing, and it says xref "has multiple references. Not detached."
View 9 Replies
View Related
Oct 24, 2011
Im using autocad 2008 and i'm having difficulty in binding xref. i've been usign autocad for 3years now but sad to say, it's my first time to try binding xref.
So here's the scene, got xref file, then bind it, and then the whole xref drawing disappear but the xref filename is still in the list at the xref pallette? What should i do?
View 9 Replies
View Related
May 29, 2012
Is there a setting that would cause a xref to detach itself when the drawing is closed? I have an existing model, went through the time to relocate all the attachments.
Once everything is attached I save my work close it out and move to another area, when I open up the model I was working on before with all the attachments that I had located, the xrefs are no longer attached and I must redo all the work that was done previously.
View 3 Replies
View Related
Jun 19, 2013
Is there a way to toggle visibility of a corridor in a drawing where the model has been Xref'd into? The problem I am having is that we have one Model drawing that has a corridor.This Model is xref'd into multiple drawings. Not all drawings should show the corridor.
The only way I have found so far is to go into model and toggle the corridor on and off depending on which drawing I want to print or view. It creates problems when you want to run a Publish of multiple drawings because you always have to goof with the Model file. This seems a bit of a step back from being able to toggle visibility of objects in a drawing file with an xref atached and leaving it that way and ready to be printed at any time.
View 4 Replies
View Related
Nov 4, 2013
I’m having a user profile issue on one computer. I have a user, using windows 7 and AutoCAD Civil 3D 2014 on his work station. When using Civil 3D he has two issues: one, he cannot import Dgn’s. I’ve tried everything it just won’t work. Second, he cannot xref or insert PDF’s into a drawing. Now the reason why I say this is a profile issue is because if I log on to his computer (or anyone else log’s on his computer), I can do all those things in Civil 3D, import DGN’s & insert/xref PDF’s. If this user log’s on my computer, he can do all those things in Civil 3D. Import DGN’s & insert/xref PDF’s. Something with his profile on his computer is corrupt and I’m trying to fix it without deleting and creating another user profile.
View 5 Replies
View Related
Jul 30, 2012
How to do this?
Civil 3D 2012 SP2
View 9 Replies
View Related
