AutoCAD Architecture :: Room Tags Quit Working?
Aug 15, 2011
We have had this problem on several computers in the office and it seems to happen at random. The existing tags in the files still read correctly, but if you try to insert a new tag, or a room name or number updates, the only way to get them to read the correct space information is to close AA and restart it. I have not been able to identify any common circumstances when this occurs.
We are on AA 2010. This morning I had barely been in the program an hour when I had to restart just to change a room name.
View 1 Replies
ADVERTISEMENT
Jan 16, 2013
I am editing an old file set up by another firm that is used by our clients to keep track of room sizes etc, which has a room data table and room tags tied to area polylines. It has worked just fine on our 2013 Acad Architecture, but when I sent them (saved down to 2010) back to our client, using 2012 Acad Architecture, the tags disappear and the table is unpopulated.It seems like it must have something to do with the file originally being created way back when, along with some quirk between 2012 and 2013.
View 2 Replies
View Related
Nov 20, 2013
I'm attempting to create a room schedule for my floor plan that shows Room Number, Room Name, Area, and Ceiling Height. First off, I would like to tag the rooms with just the Room Number, and not both the number and name - can that be done? Second, I'm able to schedule the Room Numbers and Names correctly, but the Area and Ceiling Height columns are filled with ? marks.
This is strange because I can clearly see the space area in the properties tab when I click on each space. *In the attached screenshot, note how both the base area and space height are visible in the properties tab when I have a space selected.
View 6 Replies
View Related
Jun 18, 2012
Room Tags.......I did the First Floor by doing the following:
Space Generate then Room Tag. All looked great. I did this a few days ago.
I go to do the same thing to the Second Floor this morning and all is not great. The First and Second Floor are in the same model space, Space Generate appears to have worked just fine; however, when I go and do the Room Tag the tag comes in huge. Why?
Also, if I do a Room Tag this morning to the First Floor the tag comes in huge too. (not shown in the attached) I must have changed a setting somewhere.
View 6 Replies
View Related
Feb 24, 2011
I have a Room Tag (multi-view block) that was created in a previous release of AutoCAD Architecture that is not coming in at the correct scale in AutoCAD Architecture 2011. When we used to insert this block into an 1/8"=1'-0" drawing, it came in at a scale of 12.0,12.0,12.0. Now when we insert it into a 1/8"=1'-0" drawing, it comes in at 9.0,9.0,9.0. So, at 1/4"=1'-0" it comes in at 4.5,4.5,4.5; when it should be 6.0,6.0,6.0. I have many custom blocks that we have created for door tags, section refs, etc. and would just like to know what scale factor needs to be adjusted to fix this small issue.
View 2 Replies
View Related
Aug 1, 2011
I have completed 4 projects with Arch 10 and this is the first project with this problem. I use Space Generate to create spaces, tag the room with Room Tag, put the room tag where I want it, close the floor plan and when I open the plan back up some of the room tags have moved to a new location. This has happened 3 times now with the same floor plan. Out of the 39 rooms 22 room names have moved their location. Please see attached partial plan.
Why?
View 4 Replies
View Related
Apr 30, 2010
An architect sent me his revit file, it contains the full model and all the floor plan views and drawing sheets. He has floor plan views set up for each floor and some enlarged views as well. On each floor plan view each room has a tag that contains room name and room number and every door has a tag that contains the door number.
When I create a new file and link in his file so I can then start working, doing what we need to do, adding devices, etc. The problem is, the architect's room tags and door tags dont link in, and if they do I cant see them. I've gone through every possible combination in the visibility/graphics options to no avail.
Room and door info linking in should be a basic function of revit; how could autodesk expect mech, elec, plumbing engineers to create drawings that have zero room and door info?
If it matters, I'm working in Revit 2010.
View 6 Replies
View Related
Feb 20, 2014
I am working with room tags that has multiple yes/no features. my problem is its hard aligning text because they wont snap to centers or refernece lines. How are people working with this. It causes for sometimes the leader line when used to not want to be straight or leaves some funky angle when change scale
View 1 Replies
View Related
Feb 5, 2014
I am creating a room tag with various family types. unlike creating other families when I am in the family editing and I click through other types it hides the objects that are only visible for the proper value. How do I do the same. Being that I have a few types its getting sort of hard to see with the different amount of texts.
View 1 Replies
View Related
Jan 31, 2014
how to make room tags than can break in two words and possibly how to remove the symbol crossing of area.
View 1 Replies
View Related
Jul 2, 2012
I installed Infrastructure Design Suite 2013 on my pc to try, when using 2012.
F1 doesn't work and neither does any of the buttons on the Help ribbon. I haven't uninstalled the 2013 version yet. Was hoping to not have to.
View 2 Replies
View Related
May 6, 2011
I just tried to do an xref and the command stops everything. I get no reaction from autocad. What is wrong?
here is an update: The Xref Palette is docked to my left side and when I hover to get it to flip out I click the DWG button in the left hand upper corner. Well nothing happens from there. Now, when I type -xref the command works at the command line. How do I get the palette to work again?
View 9 Replies
View Related
Feb 17, 2010
I must have changed some dam switch or something. DBLCLKEDIT is set to on and CUI is setup for some double click actions.
View 2 Replies
View Related
Jan 24, 2011
What woudl be the easiest/most common sense way to add wainscot to a room in CAD? If it is paneling, should it be a block, or added to the wall as a component?
View 4 Replies
View Related
Aug 11, 2013
Any routine or tool that simplifies calculating and labeling floor areas?
Currently, I draw a polyline around the desired area, list it to get the square footage and then create a text line and type in the square footage. This method takes multiple steps and is easy to mistype the area.
I would love a simple tool that would let you draw a polyline and automatically label it for you.
View 1 Replies
View Related
Nov 1, 2013
I've created a number of spaces, and I want the space name to show up in a Room schedule. Here is a picture of the Properties window with one of my spaces selected. The space name is 'Spanish 2'. see first attachment
I understand I need to add a column to my room schedule that has this value in it. Here is an image from the 'Edit Schedule Table Style' dialog and the 'add column' sub dialog.
see second attachment
which one of this rather lengthy list is the correct one? I've tried all the values that have 'name' in them but all I get is '?' in my schedule. I've attached the file I'm working on. I created the spaces by dragging and dropping from the tool palettes out of the box, and the room schedule the same way.
View 6 Replies
View Related
Mar 18, 2013
I have received drawings from someone else that utilize what I believe to be custom room tags. The tags consist of multiple lines of information e.g. Number, name line 1, name line 2, floor, base, north, south, east, west, occupancy, prog area, room area, etc. As of right now there is information in all of the data boxes as seen in the properties box.
However the only information shown in the drawing area is Number, name, and room area. What I would like to know is how would i keep the room area information, but not show it in the drawing area? Basically I would like to be able to make different pieces of information visible or invisible.
View 3 Replies
View Related
Aug 8, 2012
We are have been using Inventor to draw wooden furniture for a couple years, and have a custom appearance library with several different finishes (using photos of actual finished pieces of wood). Every now and then a part (ipt) takes a notion to not change to the color we set it to, seemingly without ryhme or reason. This mostly occurs with mirrored parts, but occasionally a standard (not mirrored part) will do this as well.
We have done all the obvious things, and some not so obvious. The path to the photos and the library is added to the project, and I opened the Appearance Browser and checked to make sure appearance knows where to find its bmp file, and it still doesn't do it to change color. And yes, I tried restarting my computer, because a couple days ago I was working with the Appearance Browser, and sometimes restarting Inventor made a difference in whether certain things worked or didn't work. This is also not limited to one computer, it acts like this on all of our computers.
We are using some png files and some bmp picture files. Would the file format maybe have something to do with it ?
View 1 Replies
View Related
Dec 2, 2004
This may sound like a stupid question but I have been doing a bunch of work on different photos over the last few days and every thing has been working fine.
Today I had the program open and was working on a project with the eraser tool and I had to leave to answer the phone. When I left the tool was working fine while I was away from the computer it kicked into sleep mode. When I came back and went to start where I left off the eraser tool would do nothing.
I have since garbaged that whole project, restarted my computer reset all the tools you name it and I can not get that or the paint brush to work.
The eraser tool will make a very fine scratch no matter how I set it.
What happened while I was away from my desk????
I do not have any kids or anyone else that would have messed something up.
Does anyone have any ideas, is it something simple or should I try reloading the program?
View 1 Replies
View Related
Jul 11, 2012
I have created room tags and would like to use the floor plan (with room names) as Xref. Is there a way I can locate the room names in one location per room on the main floor plan and then relocate the room names on the reflected ceiling plan and NOT move the room name on the main floor plan?
View 1 Replies
View Related
May 28, 2013
I have a drawing that has room spaces & tags attached to them. I can not figure out why there is an arc leading from the room tag to the space it is attached to. When I detach the room tag from the space, it disappears, but when I re-attach it, the arc from the tag to the space appears. How do you turn it off? I copied the space style from another file to over-write this one thru style manager, no luck...
View 2 Replies
View Related
Oct 12, 2011
I am using the 'Room tag with Dimensions' from the Content Browser. When it comes into the drawing, the room name is not centered above the rest of the tag text. So, I opened the block and moved the text and then saved the block. When I go to use the tag again - it tags everything - walls, doors, windows, etc...
Also, the drag and drop function does not work well - I have to drag a tool several times into the drawing from the content browser in order for it to work..
View 2 Replies
View Related
Mar 6, 2011
I need to make the door schedule have the room name in it. I am using the project based door tag so it is already numbered like the room tag.
View 2 Replies
View Related
Sep 12, 2008
I am currently using the trial version of PS CS3 on a vista machine. (my true copy is on the way) Droplets worked yesterday but suddenly don't work today.
View 1 Replies
View Related
Oct 7, 2012
I am creating a schedule to pick up the room areas and additional information to do with artificial lighting. That bit is the easy bit.
What I am trying to do is put a column in the schedule that shows how many light points are within that particular space. I have looked into ticking the quantity box, but that picks up just the spaces. If there was a way that this could be used to pick up the blocks in a particular space, and not the spaces that would be the simplest way to solve this (I think anyway).
Just to let you know, I am using Dynamic Blocks for the light fittings. As I can have all the different types within the one block. I have heard that I can do this using the MultiView blocks (I haven't explored this yet), but the amount of blocks that I need is going to be increased (from what I know about MultiView blocks). The simpler this is, the better I believe.
I have tried using Count under the Automaitc Property, but when used, adds the blocks as an extra row, not into the desired column. I may have to add something to the block to get it to do what I want it to do, but don't know how to do this. At the moment, I am putting this information manually into the space properties.
The next part to my question, and again, I maybe asking a bit too much here, but I want to take two totals from two different columns to create an average. If I could do this in the one table, fantastic! If I have to create a second schedule to pick this up, that is ok I suppose, but I would then do the math for it manually and just write it in if that was the case.
I'm using ACA 13
View 8 Replies
View Related
Oct 7, 2013
My adjustment brush in LR 5 suddenly quit working. It paints a white smudge instead of doing what it should. Even with the latest update, Ver. 5.2, the results are the same.
View 2 Replies
View Related
Jun 28, 2012
How to change the appearance of lines in a room finish schedule? I want to be able to have some appear bold, others to be a double line, and some to be thin? Currently when i load the standard room finish schedule the lines are not what i want them to look like.
View 1 Replies
View Related
Jun 7, 2013
Last night, I downloaded an update for Photoshop CS6, Windows 8, 64 bit. The update failed, and I can't get PS to run at all.How can I restore my program?
View 7 Replies
View Related
Jun 7, 2013
PSPX5 on a Win7 machine.I've been using this program a long time. Been using this setup for almost a year. Suddenly, the "preview" pane of the the "manage" tab has just quit working. It's whited out. I click on a thumbnail and the image info shows on the side pane, but the main frame just remains white. I've tried restarting the machine, to no avail. I can try uninstalling and reinstalling, but would rather not.
View 5 Replies
View Related
Oct 3, 2012
All of a sudden my Copy Function quit working in Corel x5.
I can copy from other programs and paste into Corel, but I cannot copy from one file to another file (or the same file even) within Corel.
I was told it could be a possible update from Windows 7 causing it and that I need to reinstall my software.
View 10 Replies
View Related
Apr 12, 2012
I like the usability of the door and window and section tags that come out of the box. I also love that they are on the ribbon. however, I would like to change the look of the tags. Like make smaller and change fonts, or adding info like room sq ftg.
View 4 Replies
View Related
