If my style library is enabled in project it always refresh definitions whenever i create a document using template and press update the window in snapshot shows up.
Is there any way to do vice versa - i.e. get all these items updated in style library as per the current document setting.
Just noticed 'use style library = No?' no longer exists in 2012 only 'read only' and 'read-write' are come uo when you RMB 'use style library' in the Projects dialog, is this correct or have I made an error during installation?
View 4 Replies View RelatedIs it possible to get export media to respect the in / out of a clip thats been set in the library? My work around of chopping up shots or chopping off slates and saving those out to the library seems a clunky.
View 3 Replies View RelatedI have been recently put in charge of all things Autodesk at my company. We have just installed 2014 software on our machines and I'm told that I need to migrate the styles library from 2013 to 2014. Here's the thing though, we have our Inventor templates and design data on a network drive for all to access.
I see where there is a style manager included in the Tools of Inventor but I open it up and I can't make heads or tails of it.
Can't save to Style Library
View 2 Replies View RelatedI made some changes to layers and line scales in our idw template and then saved them to the style library to keep things synchronized. When I started a new drawing I got a style conflict message as if I had not saved the changes to the style library (see attached). My project file is set to Use Style Library =Yes, and what's more strange is that only six of the layers didn't update in the style library while the rest did? These six layers indeed show they need to be updated in the style library when I went back into the template, but when I update them the same thing happens.
View 9 Replies View RelatedI make an idw template at home and at work i get this message that says style library will override the listed styles, and enables me to choose if i want to impose the style library or the styles in the template.
I want to impose the styles in the template and the message says that in order to achieve that i have to delete the styles.
Which styles to delete and how?
When i use the purge styles command it's empty.
I understand that duplicate names of styles make the problem, but at home i checked 2 of the styles and found them the same as at work, but maybe i don't remember all the changes.
Is the solution simply to make new styles with new names?
How do I make a style in the library standard? I made new styles in the library for a revision table and parts list, but when placing them in an IDW I always get the standard tables.
It's not a big deal to change it in the format tab after placement, but when having 50+ sheets/daily its getting annoying.
I am looking at moving from controlling my Styles in template files into a Style Library. So how exactly would I best do this? Create a new Style Library in the Style Library Manager, set it in "Style Library 1" (this makes the new Style Library "active", yes?), open my template files, and under the Manage tab, "Save" the document styles to the new Style Library? Should I then delete my Document Styles from the template?
When you get a new release of Inventor, how do you generally go about pushing your Style Library into the new release? Do you just copy-paste the old Style Library from the old release "Design Data" folder into the new release "Design Data" folder? Do you start a new Style Library in the new release, compare to the old Style Library, and push the old into into the new?
I am trying to turn the style library off in inventor 2012, I can't seem to be able to do this. I know in the past version I simply turned it off in the project editor, but I only have the read-write option now. All my drawing settings are saved to my Template, when i open the template, it changes to the style library settings, which I don't want.how to save my settings to style library this is why I have never used it.
View 2 Replies View RelatedIs it possible to add all RAL colors to the Inventor style library?
(IV10 SP1)
I want to change the default precision shown in my drawing from two decimal places to three. In my .idw file the "Units" tab does not seem to be there. I see Standard, Sketch, Drawing, Sheet. I could change each dimension one by one, but there's got to be an easier way.
View 2 Replies View RelatedI am trying to implement our new Styles Library for our Dimension styles. I keep getting this error (see attached).
I have done everything I can think of, I have mapped the default library to the new styles library location on the server. I have tried everything.
I can’t figure out how to copy a material (outside style library) from one part to another. Or how to do it with exporting and importing the material through a styxml file.
View 6 Replies View Relatedinfo on the following error message when saving to the style library.
View 5 Replies View RelatedI have copied the "Diamond Plate" from the Inventor Apperance Library to my document. Now I want to edit the texture that this style is using.
1. Where is the texture map that this style using located? When I edit the style, I can't tell what is telling it the filename. I have mundged every file on my hd that it could possible be (hoping it would cause an error), but that didnt work either. Another thing I tried was in the QAT "Duplicate as Generic", but that did not show me the texture file either.
2. Is there a way to change the angle of the texture?
Where did they put it in IV 2013?
View 9 Replies View RelatedI want to set Default BOM Structure (Document Settings/Bill of Materials) in my own Form (with Rule) for active part/assembly.
This Form (Rule) will be in template. Is there any simple way to do this (picture is in attachment)?
Is there a way in iLogic to change the document setting for an .idw file?
Inventor 2013
I'm trying to utilize the piping and routed systems tool to run some pipe, but when I setup my pipe styles, it cannot find the xml files for the pipe, fittings, etc. I know I am connected to my content server as I can insert individual fittings and manually place pipe lengths. I am running Inventor Professional 2009
View 6 Replies View RelatedI use a style library. Have it in a read-only mode in the ipj file. My drawing created a new template with a rev table with required columns.
Now, I create a new drawing file and choose this template. add few views, insert a rev table. The rev table columns headings are the same as in the template. But the column widths aren't same as in the template.
I use manage->update. It warns me that the drawing would be matched as per the style library. I agree & OK.
No use, the columns are not same size? Though the style is read only from the drawing, I go to open the style editor to check the column widths. They are different from the template.
I cant change this to read / write. I'm using a vault project. Anyway of doing this so I can save materials to the style library using a vault project?
View 2 Replies View RelatedIm looking to make a simple ilogic rule that can toggle an option in the document settings, the setting I would like to change is the Document settings> Modeling> Participate in assembly and drawing sections
I would like a form to switch the option on and off quickly, its a really usefull function however I know a few of my colleagues wont use if they cant find it easly.
Im adjusting the CAD setup in our company, and therefore im looking for a way do change the document settings on all parts in an assembly (or the whole CAD directory) the easiest way possible.!
I have attached a picture of the setting i would like changed.
Is it possible with some Autodesk task scheduler tools..?
or can it be done with an ilogic rule?
ilogic function to update local styles to match Style Library?
I have a snippet of code that, on a drawings, deletes the current parts list (if one exists), then inserts a new parts list which I want to be up to date with the Style Library.
Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit
We have, as our standard library default dimension style, a 1/32 fractional style, called "1/32-FRACTION". Various Object Types, like Linear Dimension are set to this Object Style. When I create a drawing, then these Object Defaults are in effect.
This means that, doing nothing while executing a dimension command, I get fractional dimensions by default. This works good.
However, sometimes I want to create a drawing where the default dimension style is "X.XXX-DECIMAL" without changing the Object Defaults found in the style library. I've tried to make the changes from within the style library and then save this as a template. However, when I try to make a drawing based on this template, Inventor states that the styles in the template differ from the styles in the library" and then busily goes about undoing what I careful did.
So I'm hoping there is something in the API I can call on to do this with a macro. Is it possible to write a macro that after you start a drawing, flips all the various Object Styles from "1/32-FRACTION" to "X.XXX-DECIMAL"?
When I add "Document Settings" to the quick acess toobar it causes Inventor to Crash when I close the active .ipt, idw, etc.
View 6 Replies View RelatedIs there a way that we can set the view label in the style library to show custom/user Properties?
We have set our iam/ipt templates to have some custom properties which we wish to display in the view label when the view is created however there this no way to add these properties to the label.
I find this a little strange as you can add these user Properties to the parts list in the style library? (I've added some screen caps to show what I am talking about)
I made a new rows in family table of my custom library, because use various material for beam. (By means Material Guide) Everything is working properly, but not in environment of Frame Generator.
When I insert some beam with first material, everything is OK.
Then I insert the same beam, but with other material, FG respect this my selection, but for mass calculation he use generic material with density 1g/ccm. In Parts List I can see for example stainless steel AISI 304 - it is correct, but mass is incorrect.
is there a way to tell Inventor to align the view to be perpendicular to the Origin axes when View Face or Sketch on face is selected?
It is most disturbing to have to work with the view cube once in the Sketch just to have it make sense?
This is in Inventor Pro 2012.
I work with a AutoCAd drawing that's been drawn in LisCad, then Output to AutoCAD for continuing work.
I want to use a font that a collegue used on his drawing (he used Microstation but all our drawings are first done in LisCad), I have it in the AutoCAD font library, but for some reason it doesn't show under properties in the STYLE drop box in my drawing... Is that because my drawing comes from Liscad?
I guess I can copy a word from another AutoCAD drawing to get it in, but if I can get in into my drop list it would be handy!