AutoCAD Inventor :: ILogic To Edit Document Settings
Apr 3, 2013Is there a way in iLogic to change the document setting for an .idw file?
Inventor 2013
Is there a way in iLogic to change the document setting for an .idw file?
Inventor 2013
Im looking to make a simple ilogic rule that can toggle an option in the document settings, the setting I would like to change is the Document settings> Modeling> Participate in assembly and drawing sections
I would like a form to switch the option on and off quickly, its a really usefull function however I know a few of my colleagues wont use if they cant find it easly.
Im adjusting the CAD setup in our company, and therefore im looking for a way do change the document settings on all parts in an assembly (or the whole CAD directory) the easiest way possible.!
I have attached a picture of the setting i would like changed.
Is it possible with some Autodesk task scheduler tools..?
or can it be done with an ilogic rule?
I want to change the default precision shown in my drawing from two decimal places to three. In my .idw file the "Units" tab does not seem to be there. I see Standard, Sketch, Drawing, Sheet. I could change each dimension one by one, but there's got to be an easier way.
View 2 Replies View RelatedHow do I change the document units using iLogic rules.
View 3 Replies View RelatedIs there a way to set the event trigger of an ilogic file that's already inside of a document? I have code that can automatically create and populate new rules across my assembly parts, but it would be nice to set certain rules to fire every time that part gets saved.
If it can't be accomplished outright from the API, would it be possible to throw an OnEvent (save event in this case) inside of the iLogic code, to get the same results? URL...
Where did they put it in IV 2013?
View 9 Replies View RelatedI want to set Default BOM Structure (Document Settings/Bill of Materials) in my own Form (with Rule) for active part/assembly.
This Form (Rule) will be in template. Is there any simple way to do this (picture is in attachment)?
I have an assembly with a dozen or so rules and a form in it.
After selections have been made on the form, one of the rules saves the assembly as a new assembly (save as).
This closes the first assembly and opens the "saved as" assembly, BUT the form from the first assembly stays open.
It appears the first assembly gets closed so quickly the form does not close also.
I can just hit "done" button on the form to close it in new assembly, but would rather the form close automatically.
Is there code that I can add to close the form ??
If my style library is enabled in project it always refresh definitions whenever i create a document using template and press update the window in snapshot shows up.
Is there any way to do vice versa - i.e. get all these items updated in style library as per the current document setting.
When I add "Document Settings" to the quick acess toobar it causes Inventor to Crash when I close the active .ipt, idw, etc.
View 6 Replies View RelatedI have this grid template i use for my layouts I would like to edit text from my form.. How to do???
In attached part I have it to work with the number but not with letters
I got this error popping up every time I open an iLogic edit rule and all my snippets are gone. Now it has started doing it on a different computer in our office. The error dialog box is in the image below. T
View 4 Replies View RelatedI am working on Dynamic Simulation. I ran the simulation for 4 secs, in real time it took more than 4secs but on the screen it was showing it ran for 4 secs. Is it correct? Can we edit settings to make it run for real time 4 secs?
View 2 Replies View RelatedI tried to print thisdrawing.modeldocument in a vba sub, but it doesn't work.
View 4 Replies View Relatedhow can i edit on layers on a number of document
View 2 Replies View Relatedhow can I close an iLogic Form from either an iLogic Rule, or a VBA Rule (VBA is the Preferred method)?
View 5 Replies View RelatedHow or where do you set the default value under the Edit Command Settings for, say, AddContourLabeling? Right now it is saying that I'm overriding the default to our company standard, but I want the default to be the company standard not the "Standard" style. This goes for all command settings. I'm sure the default is set somewhere.
View 2 Replies View RelatedWhen I open a document that I've worked on previously, Illustrator seems to re-set its tools - presumably to default settings. For example the pen tool fill is white, the stroke is black, the point is......etc.
It's frustrating to have to change these back to the settings that I am currently using for this document.
This also seems to apply to the windows down the right hand side that seem to open in default as opposed to how I last left them when I saved and closed Illustrator.
I'd sort of assumed that Illustrator would 'remember' my previous settings etc and open in that way. Is there a way of opening with the same, previous settings?
Any way to force the checkbox in my attached pic to "Prompt to select nested objects"?
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
I've been using Illustrator for quite some time now. I recently got an assignment to design a printed banner (bunting), with the end product size of 3' x 8' (feet).
I was wondering about the document settings I should put in to illustrator before I start designing.
P.S, I'm using Illustrator CS6.
So in document color settings in color management, should the primary color mode be RGB or CMYK? I only print inkets and never send stuff out to a regular printer.
should all color settings be at RGB if the option is offered?
Can I import (or create) default Lightroom settings from an existing document and save them? Make them a personal default set opening with all future LR catalogs?
View 2 Replies View RelatedIn LDDT, I was able to create points and manually assign a point number.
I know in Civil 3D 2013, i can assign a point number also by changing a toggle under Point Creation Tools to False.
My problem is that everytime I close out of that box and get back in, it reverts the toggle back to TRUE so I have to keep changing it back to False as well as the Next Point Number. In the above example, the Next Point Number should be 1147 (which is after my manually created point 1146) but it keeps going back to 33 which is the next available number after #1.
I'm changing computers and need to transfer over my custom document output settings in Bridge but don't know how to locate them. I have several types of custom documents.
Using CS5 Windows on a Windows 7 computer.
I want to edit a smart object but without opening it in a blank file. so I can see what I am doing in relative to all the other objects in the file something like "edit in place".
View 7 Replies View RelatedWhen I go to create a new Document in Illustrator I'll select a default document type like : Mobile and Devices. Then I go down to the different sizes and bam. The problem. I can't pick a default size that "I" want to use. Yes there are preset sizes but none of them are the ones I want to use. Ok there has to be a text file or something that lets me edit/add new document sizes to illustrator. It shouldn't be this hard. I don't own CS6. I'm on an older version of Illustrator right now. I don't know if you guys fixed this in CS6. But it should be like photoshop or indesign. Why it's different baffles me.
This is a JDI if there ever is one. Make all presets in all programs the same (editing wise) and if possible make a preset manager that allows for one preset to be added or edited and all apps see these presets.
How do I go back and re edit a document that I've already exported? It will not allow me to use any of the basic tools such as the blemish tool, skin softening tool, etc....
View 2 Replies View RelatedMy InDesign CS6 cannot function hardly at all when I try to edit this one 10 page document. It has a lot of graphics, but still, what should I do? Do you think the file is corrupt? My InDesign works well with all other documents. I have seen this before with some 4 pg documents that have a lot of pictures. Should I be making them as books rather than documents? I've never used the book setting before.
View 2 Replies View RelatedI am working on a large price list document of 200 pages. Basically it's a very long table which spans the whole 200 pages and is formated to show in two columns on each page.My InDesign is working fine normally, and it allowed me to create this document ok yesterday, however, after quitting out of the document yesterday, it will no longer allow me to open it. When I try to go back into the document it crashes with the Indesign CC has stopped working error. I don't think the file is corrupt as I took a backup of it straight after quitting out of it and the backup also won't allow me back in it. (I took the backup because I had the same issue when I tried to create a similar document just after CC was launched)
Ive looked at Windows Even Viewer and the error that it shows is as follows:
InDesign.exe
9.2.0.69
5297b4c4
Public.dll
9.2.0.69
[code]....
I dont get this crash with any other documents I work on.
Its really annoying that I cant change the output settings when I save for web something. I just want to tell Illustrator that I dont want to create a new images folder everytime I save something, and I dont want to add a _N at the end of the file name...
Is there a way to change this?, I couldnt find it.