I am creating walls so im using mline with mstyle. the problem is when I create the mline for different walls. for example drawing mline for a wall that is 20 units and then moving to a wall that needs to be 30.
is there any way to change the mline style or offset in creation time?
I am trying to create a station-offset label style that will drop the trailing zeros in the offset section - e.g. 15' instead of 15.00', but if the offset is not at a whole number, e.g. 15.01, etc. it will display the entire offset.
I created two expressions: IF(OFFSET-TRUNC(OFFSET)=0,.1/12,.00000001/12)
and this one: IF(OFFSET-TRUNC(OFFSET)!=0,.1/12,.00000001/12)
I then created two offset components, one called truncated, and one called full, and assigned the heights to match the expressions.
I have attached the file, the style is ACHD-Sta Off-Rt [copy]
C3D 2011, Win x64
I am using AutoCAD Civil 3D 2011. I am wondering if there is a way to assign an mline to a figure style in the Figure Prefix Database. Ultimately I am trying to create storm drains that have a width automatically (ex. 12" SD would come in at 12"). Right now I have a single center line that comes in and I manually offset the line to create a width or I place an mline over the center line.
View 2 Replies View RelatedHow text style creation works. It appears that I can create a text style in a drawing but it is not session related or Global and I can switch between to Styles within a drawing but not outside within a new drawing. How do you create a Text Style that is available at any time and in any drawing. Is this generaly a system setting that is controlled by an admin.
View 7 Replies View RelatedI am looking at moving from controlling my Styles in template files into a Style Library. So how exactly would I best do this? Create a new Style Library in the Style Library Manager, set it in "Style Library 1" (this makes the new Style Library "active", yes?), open my template files, and under the Manage tab, "Save" the document styles to the new Style Library? Should I then delete my Document Styles from the template?
When you get a new release of Inventor, how do you generally go about pushing your Style Library into the new release? Do you just copy-paste the old Style Library from the old release "Design Data" folder into the new release "Design Data" folder? Do you start a new Style Library in the new release, compare to the old Style Library, and push the old into into the new?
I am trying to change the default label styles for AddSegmentLabel under general styles using .NET...
Dim X As Autodesk.Civil.Settings.SettingsCmdAddSegmentLabel = CD.Settings.GetSettings(Of Autodesk.Civil.Settings.SettingsCmdAddSegmentLabel)()
X.Styles.LineLabel.Value = strChildStyleName ... says name does not exist
or
X.Styles.LineLabelStyleId.Value = oidChildStyle ... "The type of objectId is wrong"
If I manually change it to a child style and then check the values, they are the same as what I'm trying to set them to. If you use a "parent" style then these both work. Am I doing something wrong or this another limitation?
Civil 3D 2013 - Windows 7 Pro 64 - Dell T3500 - Xeon 2.67 - 24gb - Quadro 600
I've got a scene setup with a dummy wired to a helicopters proppelors. The dummy is animated from frame 0 to 130. And it is working fine. But as soon as I want to animate the dummy to frame 200 or so the propellors stop rotating from frame 130.
Where can I adjust it to get it working again?
does smoke have a feature to do 'time offsetting' ? in connect fx (not in action), i have a clip and applied some fx node like blur , CC etc. Now i want to offset or slip the network (media and fx nodes), so not only the media but also all the keyframes from all the fx node. Can i do this ? i use foundry Nuke where this can be done easily. How about in smoke ? So maybe like attaching a 'timeoffset' node to the network.
View 1 Replies View RelatedMy dragged state leader does not display properly. The attachment runs through my first line of text. My display is set to "As Composed" I do not want the stacked text setting.
View 9 Replies View RelatedI'm attempting to create a wall style that has 2 components, a framed wall and a brick veneer. What I would like to do is have this wall react a certain way when I insert a window. Basically, I don't want the window to cut into the brick veneer, only the framing.
I have attached my attempt so far, and I have not figured out how to get the window to only cut the framed portion.
I don't use MLINE much (and thought the command was DLINE) and wanted to draw 2 parallel lines. I found I could type MLINE and do what I want.
I'm trying to get used to the Ribbon and wanted to find it there, but after several minutes wasted looking all over the Ribbon, I never found it. The Help showed the ICON of 2 parallel diagonal lines but I can't find it anywhere.
I want to use MlineStyle to custom mLine.
Here are my own codes and it does't work.
Line dashdot = new Line();
dashdot.Linetype = "Dash";
MlineStyleElement off1100 = new MlineStyleElement(3720 / 2, Autodesk.AutoCAD.Colors.Color.FromRgb(0, 0, 0), dashdot.LinetypeId);
MlineStyle mlineStyle = new MlineStyle();
mlineStyle.Elements.Add(off1100, false);
Mline ml = new Mline();
ml.Style = mlineStyle.ObjectId;
How can I use MlineStyle?
I'm trying to change "capture time" of multiple photos to a specific time.
I know that there is "Edit Capture Time" feature under Metadata. But when I try to edit multiple photos, it says that "Modify the capture time stored in the selected photos by entering the correct time adjustment for the photo displayed to the left. Other photos (but not vidieos) will be adjusted by the same amount of time". And it really does.
For example,
If A file's capture time is 1/11/2011
B file's capture time is 1/11/2012
C file's capture time is 1/11/2013
I would like to change their capture time to 1/11/2014. All the three files.
But the current "Edit Capture Time" feature of Lightroom just adds three years to each file like this:
A file's capture time -> 1/11/2014
B file -> 1/11/2015
C file -> 1/11/2016
So their capture times remain as different ones. And this is not I want...
I've googled a lot and tried several programs other than lightroom as well, but the "Capture time" recognized by lightroom could not be changed by other programs.
I have a lot surfaces. Now i need change coordinates.
[URL]
I often create points manually. You get that dialogue box where you choose the layer and the default local coordinates, etc etc.
The local coordinates setting always defaults to Northing/Easting. (ditto the grid coordinates).
I set it to Easting/Northing as is standard around these parts and do my points, but if I close the box, when I reopen it to add more points later, it is back to Northing/Easting.
I cannot find a variable to control this behaviour.
I never need points to have north first and would like it to default to Easting/Northing at all times. Yes I'm using the Metric template.
Is there a way to change this default?
I have drawings with a lot of polyline objects. I need a routine which will draw multilines by coordinates of vertexes of this polylines. For example, if there is a pline with coordinates 10,10 - 20,20 i want to draw in other layer MLINE with the same coordinates. I know it's should be simple but can not gues how to do it. I've never used LISP before.
View 5 Replies View Relatedhow do you change their layer? i have been through the settings tab under "alignment", "station offset". i also right clicked on one and went through the properties.
View 4 Replies View RelatedI need an offset lisp routine to offset a selected line a set distance on each side of the selected line and change the layer of the offset lines to the current layer, and then keep prompting me to select the next line for offsetting until I'm finished.
View 3 Replies View RelatedI am running into trouble with the mosaic filter under distortion.
I am unable to change the offset of where the tiles start, and right now they get drawn in the middle of the image. That way, they get cut off mid way through when they reach the edge of the image.
I can't easily remedy this by cutting out the center, and moving the halved pieces together because they're different tiles and have different colors.
I think I can just move it over, and do another seperate mosaic on the missing region but I'd really like to be able to change that.
Over the past year we have had a problem arise on three projects and I can't seem to track down the cause. The first job it only happened once, the second it happened a few times and now on this third project it has happened twice in three days.
The issue is the dst file becomes corrupt and all of our sheet set info is lost. The backup of the dst file is overwritten every few minutes it seems and by the time we notice a problem, the backup has been overwritten by the corrupt file.
A few questions:
1) What is causing the problem? In reading other posts it seems to have something to do with more than one user writing to the file at the same time (but, this last time it happened, only one person in the office was working on the job).
2) Can we change the time between backups?
3) Is there an easier way to rebuild the sheet set?
While i am using PEDIT command, I could not select all lines or arc? Is it possible to change all entities at one time using of PEDIT?
View 7 Replies View RelatedI'm using multileader overall scale to define ml. types for different drawing scales. For example ml. style 1_10 uses overall scale 10 and 1_20 uses overall scale 20.
When i select the ml. and change its style from 1_10 to 1_20 it also changes the overall scale to 20 which is ok.
Thing is that if i want to change it back from 1_20 to 1_10 (or something else) it only changes the dimstyle and not the overall scale(text height).
I have drawn same multyline ( style 1) in two differance layers. Now I need to change the multyline style Type 1 to Type 2 in one layer without affecting to the other layer style.
Is thear a quick way to do this.
I need a pit configuration, and I use the offset command to offset a base polyline to first 10 m and then 3 and so on.. is there a way to do this in an automatically way, that you can choose the lenght of the offset for each "offset" (i.e. 1st 10 m, 2nd 3, 3rd 10 m, 4th 3 m, and so on. I am actually using civil 3D.
View 2 Replies View RelatedI have AutoCAD Mechanical (but only use ACAD), and now every time that I try to change the color of something (line, circle, text...) my AutoCAD crashes! {This is very frustrating}
Currently the only way of changing colors is through Layers.
How do you change the palette delay time?
View 1 Replies View Relatedis there a way to change the way distance is measured in a drawing from fractional to decimal? I get drawings that always display dimensions in fractions and being an engineer not a carpenter I need dimensions to be decimal so I am not forced to look up what the decimal equivalent of a fraction is all the time. I am amazed that AC doesn't force me to input dimensions as fractions on these drawings.
This is another one of those options that appears to be hidden but should be available in a real page setup option or in the options. Unlike the current page setup which seems to be a print setup instead. I love hidden options, like when I made the mistake of changing the default fractional style that I am now stuck with. I love being caught between 2 bad options. Either I have to put up with being asked constantly if I want to change how fractions are displayed or I can't change the default ever again.
are there any possibilitys that i can change my dimension style in a way that dimensions with less than a meter are shown as centimeter, for example 0,50 (m) are shown as 50 (cm).
View 6 Replies View RelatedHow to change the MText style to Romans in vb.net. At present the text style is Standard.
View 9 Replies View RelatedMy autocad light for some reason makes all text in the vertical position. I have tried to change it but the vertical selection in the style box will not change. What do I do to highlight it to make the change.
View 4 Replies View RelatedIf I make a3d part, turn on the sky-background and illuminationand render the part AutoCAD does something odd. It defaults to perspective view and activates sky-background andillumination every time I save, or switch from a layout tab to model space. How doI get it to default to parallel view and 2d wireframe?
View 9 Replies View Related
