Why do I have to select edit hole note each time I use the hole feature tool? It will not keep my settings to show qty.
It seems that I should be able to save it to my library and make it the default. I have saved library,templates all with zero luck.
See 2 screen shots in the attachment.
I am working on some VB code to reterive the dimensions fron an IDW and put them on an excel spreadsheet for an Inspection report. I found some code to which gets the linear dimensions and have added tolerance type and tolerance bands.
I have been unable to get the hole notes off the IDW. Got the general notes to work with the following
Dim invDrawNotes As Inventor.DrawingNotes
Dim invActDrawNotes As Inventor.DrawingNote
Set invDrawNotes = invActSHT.DrawingNotes
[Code]....
When using alternate dimensions in hole notes it repeats the full note for both dimension units. I would like to only have the dimensional data have the alternate information and not repeat the full note (see attached file).
IV 2010, Vista 64
I am using 2012 SP2 and when I try to place hole notes with both metric and inches it only gives me inches (in both displays)
View 4 Replies View RelatedHow can I go about editing the text for a holethread note? I want to proceed the default text w/ the quantity note.
E.g.: 7/8 THRU
What I want: ?X 7/8 THRU
What file do I edit to customize hole and thread notes?
View 4 Replies View RelatedIs it possible to add notes for each hole in a hole table?
I want to add for each hole in a hole table its true position value that I decided (instead of creating feature control frame for each hole).
The Hole and thread notes command does nothing in a drawing.
I point to a thread hole, the mouse cursor changes to the right simbol but no note is generated.
How do update the styles library to keep from getting the Styles Conflict error box. I have used the Standard.dwg file that loaded with Inventor 2012 but everytime I change styles and save the changes in a new template in reverts back to the library definitions.
I used to be able to select 'NO' in the LIbrary option of the Projects Folder but that optiion no longer exists.
I changed jobs about three weeks ago, and went from AutoCAD 2012, to Mechanical 2009. The transition has been seamless, except for one thing: text. The templates here are set up with generic notes etc, using single line text. I can't stand it.I tried the txt2mtxt trick, but it didn't work. Anytime I convert existing text to mtext, or try to create new, mtext, the editor window will come up, but not allow me to type anything.
View 2 Replies View RelatedI am in the middle of an upgrade from 2009 to 2012 and have a styles use question. I am running three flavors of Inventor: Inventor, Inventor Professional, Inventor Factory (based on Pro). The styles library that I am starting with was migrated from 2009 to 2012 and was running both IV series and Pro Seats. Although no real Pro functionality was ever used so any associated styles were still as delivered for the most part. My working environment is a single Vault project setup where all the styles and libraries are local copies on each workstations drive. All the standard content (styles and libraries) stay checked out to myself on my machine for protection.
So here is what I did to make an all inclusive styles library that all flavors of products will use. pick this apart if you see something wrong with the method.
1) I started with the migrated styles library from 2009
2) As I installed the different flavors I copied the new styles libraries over the existing migrated one without allowing it to "overwrite" any existing styles files. This only populated the styles libraries with any thing I was missing from any of the flavors.
3) I use this combined library on all station regardless of the flavor installed. So some stations have styles on them that are not in use by the installed software.
I make an idw template at home and at work i get this message that says style library will override the listed styles, and enables me to choose if i want to impose the style library or the styles in the template.
I want to impose the styles in the template and the message says that in order to achieve that i have to delete the styles.
Which styles to delete and how?
When i use the purge styles command it's empty.
I understand that duplicate names of styles make the problem, but at home i checked 2 of the styles and found them the same as at work, but maybe i don't remember all the changes.
Is the solution simply to make new styles with new names?
We have three divisions in my company. Each division uses a different set of drawing templates.
With all of that said, in my division we are trying to setup a certain said standard that was copied from the out of the box standard ANSI one as a starting point. We were hoping to have this standard reside only in our drawing templates, but the way the styles is handling it, it would appear that this standard has to be updated/added to the global styles library.
Is this a true statement that this has to be a global styles update or is there a way to have a said standard be the default setting within just certain drawing templates without being seen or affecting other drawing templates?
My program is missing a few material styles from the content library, whenever I use them on a part they just stay the default color. How do I replace them without having to re download the whole program?
View 3 Replies View RelatedI am trying to implement our new Styles Library for our Dimension styles. I keep getting this error (see attached).
I have done everything I can think of, I have mapped the default library to the new styles library location on the server. I have tried everything.
I have custom material, appearance, and sheet metal libraries. I exported all my sheet metal styles. When I try to import them, I get this message:
Error loading file 'file:///M:/00_Styles/SheetMetalStyles.styxml'.
Cannot find reference to Colors style named 'Stainless - 2B' in file:///M:/00_Styles/SheetMetalStyles.styxml.
Style 'Materialstainless Steel, 304 2B' has not been loaded from file:///M:/00_Styles/SheetMetalStyles.styxml.
The color and material it is looking for are both in the active style library.
Inventor 2013
Win 7 Pro SP1 (x64)
what this error message means and how to fix it?
View 2 Replies View Relatedilogic function to update local styles to match Style Library?
I have a snippet of code that, on a drawings, deletes the current parts list (if one exists), then inserts a new parts list which I want to be up to date with the Style Library.
Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit
We have, as our standard library default dimension style, a 1/32 fractional style, called "1/32-FRACTION". Various Object Types, like Linear Dimension are set to this Object Style. When I create a drawing, then these Object Defaults are in effect.
This means that, doing nothing while executing a dimension command, I get fractional dimensions by default. This works good.
However, sometimes I want to create a drawing where the default dimension style is "X.XXX-DECIMAL" without changing the Object Defaults found in the style library. I've tried to make the changes from within the style library and then save this as a template. However, when I try to make a drawing based on this template, Inventor states that the styles in the template differ from the styles in the library" and then busily goes about undoing what I careful did.
So I'm hoping there is something in the API I can call on to do this with a macro. Is it possible to write a macro that after you start a drawing, flips all the various Object Styles from "1/32-FRACTION" to "X.XXX-DECIMAL"?
I used "project geometry" in an assembly to locate and place a hole from one part to another. How do I save the new hole back to the original solid?
View 5 Replies View RelatedI've got a template with a set of Object defaults for an Inch drawing and a set for a Metric drawing. I've just noticed that within my metric set, if I insert a hole table with tapped holes, the font on the tapped holes doesn't match the other hole types. I'm searched around, but all the settings for the hole table style reference the same text style. (Please see the attached image.)
So is there a way to set a certain hole type to have a certain font or size within a hole table? Because if there is, I'd obviously like to remove it..... But I can't seem to figure out where the issue is.
I am trying to add a hole to an existing hole chart. I drop the part into a new drawing, set the ordinate "zero", and add a hole chart by selecting a few holes. When I attempt to edit the chart: click chart, right click "edit", click add hole, select new holes, right click to create, the "create" selection is greyed out and all I have to choose from is cancel. I searched the forum here but could not find a reference to this a know issue. Am I doing something wrong or is this a glitch of 2013.
We are running win7 x64 machines and this happens on both the 2013 Ultimate and Premium editions of the product.
I have had this problem intermittently for a few weeks since going to Inventor 2013 SP1.1. I have a part within an assembly and that part has holes created in it before assembling it with other parts. Now when I try and create a hole table in a drawing of the assembly I cannot select hole edges and the hole table is blank when trying to create it automatically from view selection. I originally thought it may be an alignment issue but I have since aligned everything correctly and it still persists. I can create the hole table if I import in just the part into the drawing but it will not allow me to create the table on the whole assembly.
I can also create the hole table if I use "centred pattern" and create cross hairs on all of the holes however it does not give me correct annotations for the holes as shown in attachment and I can manually change the annotations but seriously this should not be required. As shown in the screen shot it reads as A1 down to K1 instead of A1 to A10. .
Question: Is it possible to control the Hole Dimensions called out on the Hole Chart? As in controling leading/trailing zeros for main hole dim, alt home dim and tolerances? Can you combine the Main Dim with the Alt dim in a single column, separated with parentheses? (same with tolerance?)
View 5 Replies View Relatedwe have just upgraded from Inv 2011 to 2013. I am trying to create the drawing templates in 2013 by using the blank 2013 template and then copying our border from 2011 onto it. This works a treat apart from 1 thing.
The i properties do not get copied over as well so the sheet is blank from drawing number, title and the custom properties etc.
I would like to use the hole command to place a hole in a part. When I place the hole it won't allow me to use one of the origin planes to locate the hole from. Can I only locate holes off edges?
View 4 Replies View RelatedI have an assembly that contains a part and a hole feature (the hole feature is at the assembly level). Using the api, I'm trying to get the hole location relative to the part's coordinate system in a without using the holeplacementdefinition.distance property, this way I can get the hole location regardless of the way it was defined.
View 2 Replies View RelatedI have a user that has created a new material which is now sitting as a local style. We require this new material in the library so that everyone can use it. I tried RMB on it but the save to library functon is greyed out. This is due to the styles being read only in the project file. So I have tried to change the project file so we can add the style and then I'd change it back again, but, even though I have checked out the project file from vault, it won't allow me to edit it. What else can be locking the project file? Is there some other way I can place the new material into the style library in the project file? There are quite a few of us that use the project file since we use vault, so I'm not sure I should create a new one with the same name and save over it.
View 3 Replies View RelatedCan't save to Style Library
View 2 Replies View Relatedi use hole feature names in hole table.
i assign hole names attribute to hole feature but dont get attribute hole table.
how to get hole names in hole table.
While creating holes in a part, a small counter shows (when you click on a point) of how many holes there are.
Programs:
Solidworks (1998-2011)
Autodesk Inventor (R8 - 2013)
Autodesk AutoCad 2D
Autodesk AutoCad 3D
Catia V5
SolidEdge
Anvil (Very old program!)
Pro/E