AutoCAD Inventor :: Alternate Units On Hole Notes
Oct 25, 2012I am using 2012 SP2 and when I try to place hole notes with both metric and inches it only gives me inches (in both displays)
View 4 Replies
ADVERTISEMENT
AutoCAD Inventor :: Alternate Units In Hole Notes
Sep 11, 2009When using alternate dimensions in hole notes it repeats the full note for both dimension units. I would like to only have the dimensional data have the alternate information and not repeat the full note (see attached file).
IV 2010, Vista 64
AutoCAD Inventor :: Get Hole Notes From IDW?
Aug 9, 2013I am working on some VB code to reterive the dimensions fron an IDW and put them on an excel spreadsheet for an Inspection report. I found some code to which gets the linear dimensions and have added tolerance type and tolerance bands.
I have been unable to get the hole notes off the IDW. Got the general notes to work with the following
Dim invDrawNotes As Inventor.DrawingNotes
Dim invActDrawNotes As Inventor.DrawingNote
Set invDrawNotes = invActSHT.DrawingNotes
[Code]....
AutoCAD Inventor :: Hole / Thread Notes Edits
Oct 10, 2013How can I go about editing the text for a holethread note? I want to proceed the default text w/ the quantity note.
E.g.: 7/8 THRU
What I want: ?X 7/8 THRU
AutoCAD Inventor :: Customize Hole And Thread Notes?
Dec 29, 2011What file do I edit to customize hole and thread notes?
View 4 Replies View RelatedAutoCAD Inventor :: Adding Notes To Hole Table?
Jul 25, 2013Is it possible to add notes for each hole in a hole table?
I want to add for each hole in a hole table its true position value that I decided (instead of creating feature control frame for each hole).
AutoCAD Inventor :: Hole And Thread Notes Doesn't Work
Oct 17, 2013The Hole and thread notes command does nothing in a drawing.
I point to a thread hole, the mouse cursor changes to the right simbol but no note is generated.
AutoCAD Inventor :: Save Hole Notes To Styles Library And Templates?
Jan 12, 2012Why do I have to select edit hole note each time I use the hole feature tool? It will not keep my settings to show qty.
It seems that I should be able to save it to my library and make it the default. I have saved library,templates all with zero luck.
See 2 screen shots in the attachment.
AutoCAD Inventor :: Can't Change Hole Note Units
Oct 1, 2013See attachment. I can't get the units off of inch.
View 1 Replies View RelatedAutoCAD Inventor :: Inventor Hole Table - Mixed Units - Description Cell
Dec 18, 2013Is there a way in the description field of an Inventor hole table to have mixed units? Some hole sizes at fractions, some at 2 plc, and others at 3 places.
Inventor Pro 2013 or 14
AutoCAD 2013 :: Alternate Units Placement
Feb 7, 2013Using AutoCAD 2013, I have set my the placement of the alternate units to "Below primary value" (in Dimension Style), but they do not go underneath, they remain after the primary units. I tested in 2012, and it works fine there but not in 2013.
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Brackets In Alternate Units?
Jan 30, 2002Brackets in alternate units ...?
Is there any possible way to eliminate the brackets from around Alternate Units? I could swear I've seen a routine around that enables you to do this.
Revit :: Indicate Alternate Units Imperial / Metric?
Feb 13, 2009Is it possible to indicate alternate units, imperial/metric?
View 3 Replies View RelatedAutoCAD Inventor :: Hole Table Formatting - Different Text Depending On The Type Of Hole
Nov 6, 2012I've got a template with a set of Object defaults for an Inch drawing and a set for a Metric drawing. I've just noticed that within my metric set, if I insert a hole table with tapped holes, the font on the tapped holes doesn't match the other hole types. I'm searched around, but all the settings for the hole table style reference the same text style. (Please see the attached image.)
So is there a way to set a certain hole type to have a certain font or size within a hole table? Because if there is, I'd obviously like to remove it..... But I can't seem to figure out where the issue is.
AutoCAD Inventor :: Ultimate 2013 - Cannot Add Hole To Existing Hole Chart
May 22, 2012I am trying to add a hole to an existing hole chart. I drop the part into a new drawing, set the ordinate "zero", and add a hole chart by selecting a few holes. When I attempt to edit the chart: click chart, right click "edit", click add hole, select new holes, right click to create, the "create" selection is greyed out and all I have to choose from is cancel. I searched the forum here but could not find a reference to this a know issue. Am I doing something wrong or is this a glitch of 2013.
We are running win7 x64 machines and this happens on both the 2013 Ultimate and Premium editions of the product.
AutoCAD Inventor :: Can't Select Hole Edges When Creating Hole Table
Nov 19, 2012I have had this problem intermittently for a few weeks since going to Inventor 2013 SP1.1. I have a part within an assembly and that part has holes created in it before assembling it with other parts. Now when I try and create a hole table in a drawing of the assembly I cannot select hole edges and the hole table is blank when trying to create it automatically from view selection. I originally thought it may be an alignment issue but I have since aligned everything correctly and it still persists. I can create the hole table if I import in just the part into the drawing but it will not allow me to create the table on the whole assembly.
I can also create the hole table if I use "centred pattern" and create cross hairs on all of the holes however it does not give me correct annotations for the holes as shown in attachment and I can manually change the annotations but seriously this should not be required. As shown in the screen shot it reads as A1 down to K1 instead of A1 to A10. .
AutoCAD Inventor :: Control Hole Dimensions Called Out On Hole Chart?
Nov 28, 2012Question: Is it possible to control the Hole Dimensions called out on the Hole Chart? As in controling leading/trailing zeros for main hole dim, alt home dim and tolerances? Can you combine the Main Dim with the Alt dim in a single column, separated with parentheses? (same with tolerance?)
View 5 Replies View RelatedAutoCAD Inventor :: Use Hole Command To Place A Hole In A Part
Oct 19, 2012I would like to use the hole command to place a hole in a part. When I place the hole it won't allow me to use one of the origin planes to locate the hole from. Can I only locate holes off edges?
View 4 Replies View RelatedAutoCAD Inventor :: How To Get Hole Location Without Using Hole Placement Definition
Apr 27, 2012I have an assembly that contains a part and a hole feature (the hole feature is at the assembly level). Using the api, I'm trying to get the hole location relative to the part's coordinate system in a without using the holeplacementdefinition.distance property, this way I can get the hole location regardless of the way it was defined.
View 2 Replies View RelatedAutoCAD Inventor :: How To Get Hole Names In Hole Table
Aug 28, 2013i use hole feature names in hole table.
i assign hole names attribute to hole feature but dont get attribute hole table.
how to get hole names in hole table.
AutoCAD Inventor :: Hole Count During Hole Creation?
Jun 17, 2013While creating holes in a part, a small counter shows (when you click on a point) of how many holes there are.
Programs:
Solidworks (1998-2011)
Autodesk Inventor (R8 - 2013)
Autodesk AutoCad 2D
Autodesk AutoCad 3D
Catia V5
SolidEdge
Anvil (Very old program!)
Pro/E
AutoCAD Inventor :: ILogic Code That Creates Abbreviations Or Alternate Text
Nov 22, 2013I have a lot of pre existing sheet metal parts with my material listed as Steel, Mild.
I am using this code to automatcally fill out my iproperties but the material name is not exactly what I want it to say. iProperties.Value("Project", "Description")=iProperties.Material
I'd like it so that any time it sees Steel, Mild it replaces it with the text "A36"
AutoDesk Inventor 2012
AutoCAD Inventor :: Design Notes Add-in
Mar 16, 2009Check out a new add-in to keep design notes in a running history for all Inventor file types. Also has the ability to keep track of filename changes.
View 9 Replies View RelatedAutoCAD Inventor :: Using Engineers Notes In DWG?
Dec 23, 2011How can I use engineers notes in a dwg drawing?
I want to add notes to parts and then use the notes in the 2d drawing layouts.
AutoCAD Inventor :: Editing Notes Placed In IDW
Dec 5, 2011I have placed a srting of text on an Inventor 2012 drawing howver I can't edit it once placed - double clicking / right clicking does not give me any options.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Inventor :: Bend Notes On Drawing
Aug 13, 2012Is there a way to make Inventor automatically add a note, along the bend line, indicating bend direction, number of degrees and bend radius?
Also, in 2013, where are the bend tables located? I've checked the help file, and it's telling me cprogram filesautodeskinventor 2013design data
I followed that path, but I do not have the "design data" folder it's calling for.
AutoCAD Inventor :: Writing Notes On Part / Assemblies
Jul 31, 2013When a co-worker opens an assembly or part drawing I want them to see a note regarding the model, a note that would be used for internal purpose only.
The note has to be visible on the screen when the drawing is opened, anyway of doing something like that?
AutoCAD Inventor :: Text Notes In Drawing Views?
Jan 3, 2012Is there a way to associate a text string to a drawing view so when the view is moved
around the text goes with it and remains placed in accordance with the view?
AutoCAD Inventor :: Create / Display Multiple Notes
Jan 11, 2010I am trying to create and display multiple Notes on an Inventor Part. I select the face, right click, select create note, and the note gets created perfectly. However the next note I create does not get displayed in the graphics window. It gets added to note in the browser. Is it possible to get all notes created displayed on the model?
I also see that the note automatically adds the Author and the date to the note. Is it possible to edit this information. It says the information is read only.
AutoCAD Inventor :: Editing Holes And Chamfer Notes
Oct 3, 2011Every time I create a chamfer note, I have to edit it, because I don't like '1.5 X 45° ', I like the lower case of '1.5 x 45° '. Only a small detail, maybe, but that's how I prefer it. Can I edit the template somewhere so that this happens automatically?
Similarly, can I edit the hole note so that the tolerance (6H, etc) is not shown for tapped holes?
AutoCAD Inventor :: Toggle Visibility Of Engineering Notes In Assembly?
Feb 9, 2012I have created Engineering Notes in Part and same visible in all top level assemblies (see attached image).
I searched on web for option and it is available underAplication Option>Note Tab, but I could not able to locate option in Inventor.
Inventor: Autodesk Inventor Professional 2011
