Every time I create a chamfer note, I have to edit it, because I don't like '1.5 X 45° ', I like the lower case of '1.5 x 45° '. Only a small detail, maybe, but that's how I prefer it. Can I edit the template somewhere so that this happens automatically?
Similarly, can I edit the hole note so that the tolerance (6H, etc) is not shown for tapped holes?
I have placed a srting of text on an Inventor 2012 drawing howver I can't edit it once placed - double clicking / right clicking does not give me any options.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Is it possible to chamfer shape like this (the white line) so that the chamfer degree and top chamfer length is same all around including the part on top of the slide? My goal is to use 0,75mm chamfer. I get error when I try to do it. URL.....
View 4 Replies View RelatedIs there a way to dimension chamfers like in the second pic below so that the values update. You can do a linear dimension and then alter the text and try and find that dimension in the list, but the chamfer tool works well with two clicks but you only get it with a leader. I would like the same function but with a linear dimension sometimes. It would be good if you could choose it. 45° is probably not a really good example, but the leader version is not always so clear.
View 1 Replies View RelatedI have chamfer going around my part but I need to make it to stop 2mm's before the corner. How is this done?
View 2 Replies View RelatedIn Autodesk Inventor 2013. I have a simple cylinder extrusion with a rectangle attached to the cylinder. Drawing file attached(extrusion 1). Whenever I apply a chamfer to one of the straight edges, Inventor generates negative taper on the cylinder wall (if you zoom in with a window, you can clearly see that their are two lines on the cylinder wall where the chamfer edges was applied).
Is there anyway to prevent this from happening? This gives me all sorts of problem in my CAM software because the tool is trying to machine in an area it cannot get to.
As a work around I have to create a new part file with a small gap between the cylinder and the chamfered edges. This keeps the cylinder edges nice and straight with no taper. The work around is attached as well. Since the tool can't go that far into the corner given the radius of the tool, the gap has no affect on me generating code. I have tried many different ways on creating this part with chamfers with no luck. Once the chamfer is generated, it should match the profile of the cylinder.
I'm wondering if there is any way to chamfer a set length along an edge (similar to what can be done with flanges in sheet metal mode), as opposed to the entire length of an edge.
View 4 Replies View RelatedI am trying to place a 5mm chamfer along edge so as it meets the cylinder....i cannot get it to work on this model but on an exact other model i can place a 5mm chamfer...
Inventor 2013/Inventor 2014
Is there a way to make the default size of a chamfer 1/16"?
View 2 Replies View RelatedWe commonly weld two half cone sections together to make a complete cone. To show the weld prep i have modeled a chamfer on the cone edges.
When i try and show the chamfer on the drawing using a section I cannot dimension the angle as the surface is viewed as a curve by Inventor.
I have attached a drawing and part file showing the problem and showing the detail I would like (I've shown the detail using a simple sketch).
I wanted to chamfer a poligonal faced part, but had to select the edges one by one.
The Edge Chain buttons were grayed out, why?
Been toying with sheet metal stuff here lately. Going from solid modeling to this feels kind of backwards to how you design.
Anyways, I have part (attached). 300° round. So far checks out to how I want. Please look at chamfer #2. It is in the correct location, but it is not letting me do what I want...maybe I havent started this simple peice in the correct fashion.. What I need is the chamfer in the same 'wall' where it is, but I need it 4.97° x 23" long AROUND the part.
Inventor 2014 PDS
What might cause some parts to retain there weld prep chamfers in the part file & other parts don't show the chamfers except in the assembly like an assembly feature?
I noticed that when parts were in a pattern & Weld Prep/chamfered, they retained the chamfer feature in the part.
Check out a new add-in to keep design notes in a running history for all Inventor file types. Also has the ability to keep track of filename changes.
View 9 Replies View RelatedI am working on some VB code to reterive the dimensions fron an IDW and put them on an excel spreadsheet for an Inspection report. I found some code to which gets the linear dimensions and have added tolerance type and tolerance bands.
I have been unable to get the hole notes off the IDW. Got the general notes to work with the following
Dim invDrawNotes As Inventor.DrawingNotes
Dim invActDrawNotes As Inventor.DrawingNote
Set invDrawNotes = invActSHT.DrawingNotes
[Code]....
How can I use engineers notes in a dwg drawing?
I want to add notes to parts and then use the notes in the 2d drawing layouts.
Is there a way to make Inventor automatically add a note, along the bend line, indicating bend direction, number of degrees and bend radius?
Also, in 2013, where are the bend tables located? I've checked the help file, and it's telling me cprogram filesautodeskinventor 2013design data
I followed that path, but I do not have the "design data" folder it's calling for.
When using alternate dimensions in hole notes it repeats the full note for both dimension units. I would like to only have the dimensional data have the alternate information and not repeat the full note (see attached file).
IV 2010, Vista 64
When a co-worker opens an assembly or part drawing I want them to see a note regarding the model, a note that would be used for internal purpose only.
The note has to be visible on the screen when the drawing is opened, anyway of doing something like that?
Is there a way to associate a text string to a drawing view so when the view is moved
around the text goes with it and remains placed in accordance with the view?
I am using 2012 SP2 and when I try to place hole notes with both metric and inches it only gives me inches (in both displays)
View 4 Replies View RelatedHow can I go about editing the text for a holethread note? I want to proceed the default text w/ the quantity note.
E.g.: 7/8 THRU
What I want: ?X 7/8 THRU
What file do I edit to customize hole and thread notes?
View 4 Replies View RelatedI am trying to create and display multiple Notes on an Inventor Part. I select the face, right click, select create note, and the note gets created perfectly. However the next note I create does not get displayed in the graphics window. It gets added to note in the browser. Is it possible to get all notes created displayed on the model?
I also see that the note automatically adds the Author and the date to the note. Is it possible to edit this information. It says the information is read only.
Is it possible to add notes for each hole in a hole table?
I want to add for each hole in a hole table its true position value that I decided (instead of creating feature control frame for each hole).
I have created Engineering Notes in Part and same visible in all top level assemblies (see attached image).
I searched on web for option and it is available underAplication Option>Note Tab, but I could not able to locate option in Inventor.
Inventor: Autodesk Inventor Professional 2011
The Hole and thread notes command does nothing in a drawing.
I point to a thread hole, the mouse cursor changes to the right simbol but no note is generated.
This following happened frequently.
1. We spend a lot of time creating a drawing with dimensions and leader text.
2. The part or assembly changes (feature or components are deleted or replaced)
3. Dimensions that reference deleted geometry disappear.
From what I can tell, the dimension will turn pink/purple and not disappear ONLY if one of it's attachment points is still valid. However, if all the attachment points for the dimension or leader text are gone, then the dimension or leader text simply disappears.
We spent a lot of time creatin these dimensions and/or leader text and would like to know if there is a problem. We have had many instances where we though the drawing was done only to find vital info missing. To make sure this doesn't bite us again we currently have to carefully compare archived revisions of the drawing with the current drawing to make sure everything is there.
Why do I have to select edit hole note each time I use the hole feature tool? It will not keep my settings to show qty.
It seems that I should be able to save it to my library and make it the default. I have saved library,templates all with zero luck.
See 2 screen shots in the attachment.
-Did I do the rectangular pattern correctly? If not, the correct one with step-by-step information
-Why the holes do not go through the thickness of plate?
I'm looking to find how many holes there are in a part ( and then what their diameters are). I tried using
Dim oPartDoc As Document
Set oPartDoc = ThisApplication.ActiveDocument
Dim oCompDef As PartComponentDefinition
Set oCompDef = oPartDoc.ComponentDefinition
MsgBox "there are " & oCompDef.Features.HoleFeatures.Count & " holes"
but this falls down if a hole feature created more than one hole at the same time.
