AutoCAD Inventor :: How To Stop Chamfer Before The Corner
Dec 27, 2011I have chamfer going around my part but I need to make it to stop 2mm's before the corner. How is this done?
View 2 RepliesI have chamfer going around my part but I need to make it to stop 2mm's before the corner. How is this done?
View 2 RepliesBeen toying with sheet metal stuff here lately. Going from solid modeling to this feels kind of backwards to how you design.
Anyways, I have part (attached). 300° round. So far checks out to how I want. Please look at chamfer #2. It is in the correct location, but it is not letting me do what I want...maybe I havent started this simple peice in the correct fashion.. What I need is the chamfer in the same 'wall' where it is, but I need it 4.97° x 23" long AROUND the part.
Inventor 2014 PDS
Is it possible to chamfer shape like this (the white line) so that the chamfer degree and top chamfer length is same all around including the part on top of the slide? My goal is to use 0,75mm chamfer. I get error when I try to do it. URL.....
View 4 Replies View RelatedIs there a way to dimension chamfers like in the second pic below so that the values update. You can do a linear dimension and then alter the text and try and find that dimension in the list, but the chamfer tool works well with two clicks but you only get it with a leader. I would like the same function but with a linear dimension sometimes. It would be good if you could choose it. 45° is probably not a really good example, but the leader version is not always so clear.
View 1 Replies View RelatedIn Autodesk Inventor 2013. I have a simple cylinder extrusion with a rectangle attached to the cylinder. Drawing file attached(extrusion 1). Whenever I apply a chamfer to one of the straight edges, Inventor generates negative taper on the cylinder wall (if you zoom in with a window, you can clearly see that their are two lines on the cylinder wall where the chamfer edges was applied).
Is there anyway to prevent this from happening? This gives me all sorts of problem in my CAM software because the tool is trying to machine in an area it cannot get to.
As a work around I have to create a new part file with a small gap between the cylinder and the chamfered edges. This keeps the cylinder edges nice and straight with no taper. The work around is attached as well. Since the tool can't go that far into the corner given the radius of the tool, the gap has no affect on me generating code. I have tried many different ways on creating this part with chamfers with no luck. Once the chamfer is generated, it should match the profile of the cylinder.
I'm wondering if there is any way to chamfer a set length along an edge (similar to what can be done with flanges in sheet metal mode), as opposed to the entire length of an edge.
View 4 Replies View RelatedI am trying to place a 5mm chamfer along edge so as it meets the cylinder....i cannot get it to work on this model but on an exact other model i can place a 5mm chamfer...
Inventor 2013/Inventor 2014
Is there a way to make the default size of a chamfer 1/16"?
View 2 Replies View RelatedWe commonly weld two half cone sections together to make a complete cone. To show the weld prep i have modeled a chamfer on the cone edges.
When i try and show the chamfer on the drawing using a section I cannot dimension the angle as the surface is viewed as a curve by Inventor.
I have attached a drawing and part file showing the problem and showing the detail I would like (I've shown the detail using a simple sketch).
I wanted to chamfer a poligonal faced part, but had to select the edges one by one.
The Edge Chain buttons were grayed out, why?
Every time I create a chamfer note, I have to edit it, because I don't like '1.5 X 45° ', I like the lower case of '1.5 x 45° '. Only a small detail, maybe, but that's how I prefer it. Can I edit the template somewhere so that this happens automatically?
Similarly, can I edit the hole note so that the tolerance (6H, etc) is not shown for tapped holes?
What might cause some parts to retain there weld prep chamfers in the part file & other parts don't show the chamfers except in the assembly like an assembly feature?
I noticed that when parts were in a pattern & Weld Prep/chamfered, they retained the chamfer feature in the part.
I have a banner heading that is more or less outlined text. I want to give all the corners a rounded corner and at the moment would just do it all by hand, one at a time. So I want to go from a to b:
But I would like to find an easy way to make all corners the same diameter regardless of the angle too.
How can I create a hem in a corner? The default setup overlaps them and throws an error. A simple "miter" will correct the problem, but I cannot figure out how to do it!
View 4 Replies View RelatedTrying to add a radius in a corner and its not cooperating. Take a look at this image. Notice how the one radius curves around the part, but the other one does not? I know these two look different because they are different sizes. I would like to get the 1in radius to go straight across like the R3/4, but it will not do it. I've tried the options under the chevron, but nothing gives me what I want.
View 9 Replies View Relateddimension bend parts with corner intersection. Is there any option in Autodesk Invenor Drawing so that i can give dimensions as shown in attached image.
View 2 Replies View RelatedI was just wondering if there is an easier method of getting a 45 degree corner on flanges of 2 different sizes. 1 flange is 1" and the other is .75". I have been cutting the .75" flange down and adding to the face of the 1" flange.
The corner I'm talking about is on the far right of the part.
How to joint this corner together for becoming 45 degree corner shape?
View 9 Replies View RelatedI have couple of problems that I haven't managed yet on my own.
1. How I can get "smooth" bends without those "steps"? See part: Smooth Bend
2. How I can round that Flange's "inside" corner? Just smooth Corner Round like those other corners have. See part: Corner Round
I draw square. The 1st point and last points are left-top and finally set 5 points.The direction is clock-wise and made closed path.To get smooth-curved polygon shape, I used API 'PointsToCurves'.But, the first and last points are connected by cornered (not smooth) point. Here's result.
Maybe, I must set that square is closed path, to API, but it seems to be no parameter to set.So, I want to know how to get smooth corner shape every corner.I use SDK CS5.
Sometimes corner snaps in sketch mode will turn off. why does this happen and how do I fix it?
View 1 Replies View RelatedI am attempting to model an existing part as it is currently being manufactured a simple hopper, and am having an issue with a corner.
Look at the converging corner of the attached file.
How could this be done to avoid the problem? Or can it? 2010 Suite-SP4 64bit
why i am getting green recyle arrows in browser and green corner incidicator in .idw file.
What does it represent? if it comes because of design error then where to look for the mistake.
I want to control the Corner Seam in the sheet metal styles but it seems not possible to do that.Now i wondering if this can controled in iLogic.
I want to control the settings which you can make in the Corner Seam.In the attachment are two drawings white different corners, overlap.Those i want to control in different sheet metal styles.Your drawings are only as good as the symbols that complete them...
For some reason the cut isn't flattened properly. How can I do it right? (attached is the part)
Inventor 2012 Pro.
I7 workstation
I wan't to make a corner seam to a sheet metal product, but I can't make the last 2 corner seams.
View 6 Replies View RelatedI'm trying to place my ordinate dimension to a theoretical sharp corner and the dimension will only go to the end of the arc (see pict). I try and drag the dimension end point by selecting the end of on line and dragging it over, select the other line and drag it till the two yellow dots meet at the intersection.
When I let go of the mouse button to place the dimension it pops to one side or the other of the arc.
Is there any way to set the default corner seam behavior in the sheet metal template? Right now a simple corner seam always puts a gap approximately the metal thickness, I need to make that smaller as the default behavior.
View 4 Replies View RelatedI am working through JD Mathers tutorials and got stuck on Tutorial 4, Figure 16, adding a .75 mm chamfer. How is that added?
View 9 Replies View RelatedI have defer updates set to on yet every time I drag a part in an assembly inventor rebuilds everything, even though the part being moved has no adaptivity, no mates and no derived parts. It's rebuilding over 300 unrelated and unaffected parts every time.
I just want to drag parts around for concept layout and lying so I don't want mates just yet. How can I make it stop?
(2011 XP64)
how to chamfer an isometric box. I need to do the 2 front edges but unsure.
View 9 Replies View Related