AutoCAD Inventor :: Corner Cut On A Flanged Sheet Metal Part - How To Cut Properly
Oct 3, 2011For some reason the cut isn't flattened properly. How can I do it right? (attached is the part)
Inventor 2012 Pro.
I7 workstation
ADVERTISEMENT
AutoCAD Inventor :: Flanged Sheet Metal Parts
Aug 2, 2012I recently had an issue in adding flanges to a sheet metal part. The thread for that can be seen here:
[URL].......
The problem I am having now is with the size of the part. I need the linear distance from the bottom edge of a flange to match the inner diameter of my part. As you can see, this is not the case as it stands right now.
AutoCAD Inventor :: Sheet Metal Corner Joint
Jan 13, 2013How to joint this corner together for becoming 45 degree corner shape?
View 9 Replies View RelatedAutoCAD Inventor :: Sheet Metal Corner Chamfer
Dec 18, 2013Been toying with sheet metal stuff here lately. Going from solid modeling to this feels kind of backwards to how you design.
Anyways, I have part (attached). 300° round. So far checks out to how I want. Please look at chamfer #2. It is in the correct location, but it is not letting me do what I want...maybe I havent started this simple peice in the correct fashion.. What I need is the chamfer in the same 'wall' where it is, but I need it 4.97° x 23" long AROUND the part.
Inventor 2014 PDS
AutoCAD Inventor :: Sheet Metal - Extra Material In Corner
Oct 28, 2011I am attempting to model an existing part as it is currently being manufactured a simple hopper, and am having an issue with a corner.
Look at the converging corner of the attached file.
How could this be done to avoid the problem? Or can it? 2010 Suite-SP4 64bit
AutoCAD Inventor :: Control Corner Seam In Sheet Metal Styles
Dec 7, 2012I want to control the Corner Seam in the sheet metal styles but it seems not possible to do that.Now i wondering if this can controled in iLogic.
I want to control the settings which you can make in the Corner Seam.In the attachment are two drawings white different corners, overlap.Those i want to control in different sheet metal styles.Your drawings are only as good as the symbols that complete them...
AutoCAD Inventor :: Make A Corner Seam To A Sheet Metal Product
Feb 10, 2012I wan't to make a corner seam to a sheet metal product, but I can't make the last 2 corner seams.
View 6 Replies View RelatedAutoCAD Inventor :: Set Default Corner Seam Behavior In Sheet Metal Template?
Jan 10, 2008Is there any way to set the default corner seam behavior in the sheet metal template? Right now a simple corner seam always puts a gap approximately the metal thickness, I need to make that smaller as the default behavior.
View 4 Replies View RelatedAutoCAD Inventor :: Sheet Metal From Flat Sheet To Rolled Part?
Sep 12, 2013A collegue asked me about this as he has been given a part to model and the details are for the flat sheet not the finished model. Is this possible in 'sheet metal'? I had a quick play but couldn't work it out. Im used to creating the finished part and 'un-folding' to get the flat pattern.Detail supplied below.
View 4 Replies View RelatedAutoCAD Inventor :: Unable To Derive A Part Containing Only A Block Into A Sheet Metal Part
Nov 15, 2011 I set up our company log which gets embossed on most parts as a sketch block in an .ipt. The .ipt contains nothing but the sketch block. To use it, the designer only needs to derive the Logo.ipt file into their part and then use the scale setting to set the derived block to the desired size for that part. The result is a scalable set of line geometry that can easily be used for extrusion or emboss that is standard for all users. It works beautifully, that is until you try to use it in a sheet metal part in 2012.
For some reason, when this same part, which works perfectly in normal parts, is derived into a sheet metal part an error pops up stating that, "Selected part does not have any geometry that can be derived." Say what?
I was able to find a workaround by directly copying the block into the sheet metal part, but you no longer have the ability to go back and scale it if needed. Even more strange, when the block was copied over, it could not be deleted from the new part.
Is this just a bug with 2012? Why does it work in a normal part but not sheet metal?
AutoCAD Inventor :: Make As Sheet Metal Part And Have Option To Flatten Part?
Dec 28, 2012The part i make is from solid model>The part needs to be in sheet metal.What steps do i use to make as sheet metal part and have option to flatten part.
View 1 Replies View RelatedAutoCAD Inventor :: Converting Solid Part To Sheet Metal Part?
May 4, 2012convert the part that I have drawn to sheet metal. I have tried to make the part from sheet metal and it did not work out at all. I have attached both versions of the part.
View 1 Replies View RelatedAutoCAD Inventor :: Convert Standard Part To Sheet Metal Part
Aug 29, 2012In previous releases (2009 i think) when i converted a standard part to a sheet metal part i could recall all the sheet metal styles by linking back to the sheet metal template (i can't remember exactly how this was done, but it was possible with one operation)
In 2011 i canot find a quick way of doing this, it looks like i have to open the sheet metal template and export each different style (about 40 of them) and then import each one into the converted part. am i missing something? is there a simpler way similar to how it used to be done? Why have Autodesk made this more difficult?
As it stands at the moment it would be quicker for me to remodel the parts from scratch using the sheet metal template. I know this is the obvious solution, but seems strange to change something that worked well to something that doesn't!
AutoCAD Inventor :: Bend Part Of Normal Part (not Sheet Metal)
Apr 3, 2013I have a structrual rectangular tube as shown in the picture below. I need to fold the four flanges inward to create a sort of point or pyramid.
View 9 Replies View RelatedAutoCAD Inventor :: Cuts In Sheet Metal Part
Sep 3, 2013I made a part in sheet metal and used the Cut tool for cut-outs...i tried by using flatten Patern,draw sketch but this did not cut part...is there a more better way of making these cuts?
INV 2013
AutoCAD Inventor :: Cannot Convert To Sheet Metal Part
Sep 16, 2013For whatever reason this part was not modeled as a sheet metal part from the beginning, but now we would like to convert it to one. But when the "Convert to Sheet Metal" button is pressed, an error message pops up saying "This model cannot be converted to Sheet Metal because it contains features that have created multiple bodies. In order to convert to Sheet Metal these features must first be removed". The only way I can get this message to go away is to delete all the features. This part is used in a few weldments, so I'd rather not have to redraw it, but I'm at a loss as to why it can't be converted.
Using Inventor Professional 2014.
AutoCAD Inventor :: Making Sheet Metal Part
Oct 12, 2012I have a 14 gauge sheet metal part that follows the profile in the attached picture. 7/8" legs with a 1/16" offset. Because it's 14 gauge, the contour flange won't create it. I need it to be able to be turned in to a flat pattern so that I may export it to a .dxf.
Is there another way to make this that will allow me to flat pattern it? I have a couple of pieces like this where the offset is very slim, so I am looking for a way to do all of them like this.
AutoCAD Inventor :: How To Make The Part In Sheet Metal
Jan 25, 2013I created this part with solid modelling......can / how this be made with sheet metal tools.....i do not use sheet metal tools but plan to.
View 2 Replies View RelatedAutoCAD Inventor :: Bending Sheet Metal Part?
Oct 25, 2012I want to bend the sheet metal part as on 90deg
I have tried using bend and Fold tool but it dose not produce the right model as desired.
AutoCAD Inventor :: Convert To Sheet Metal Part?
Nov 3, 2012I would prefer to make this part with the Sheet Metal tools . How would this be made with sheet metal tools and how do i flatten this piece?
View 4 Replies View RelatedAutoCAD Inventor :: Sheet Metal - Part Won't Flatten
Sep 17, 2013Its been a long while since I have run into something that I have drawn which I cannot get to flatten. I am using Inventor 2011. If you can get it to work in 2012 or later, then I guess it is just time I upgrade.
View 6 Replies View RelatedAutoCAD Inventor :: Sheet Metal Part - Rip Command / Extrude
Jun 6, 2013I have attached a sheet metal part (2014 .ipt) and am having issues trying to use the rip command, maybe my understanding of the rip command is unclear, and I should probably just create a sketch and extrude a slit.
Using the image below as a reference,
What I want to do is to create a rip or slit from P1 to P2, which will give me face C. After this rip, I want to bend face C at P1 so that it is parallel to face A, leaving face B at its current state.
(the construction lines are from the existing frame that this will be welded to.)
My 2 solutions are to create this slit using the extrude command then fold, or to cut face C out completely and add a flange to that cut edge. I am just curious why the rip command is not letting me create a slit from P1 to P2.
AutoCAD Inventor :: Unfolding Twisted Sheet Metal Part
Oct 4, 2011I drew a very funky bracket in IV 2012. I tried using the sheet metal features but they wouldn't cooperate with the funky geometry. I ended up having to draw to sketch profiles, lofting to create a thin feature, and thickning it to material thickness. But this left me without any real bends that the unfold tool can recognize. I tried using the unfold tool (I know that's not what it's for) but it gave me some very funky geometry. I tried ripping out the lofted bends, which worked great, but that leaves me with twisted edges that the bend tool can't grab. how to either model this using the sheetmaetal tools, or how to make this thing unfold?
View 3 Replies View RelatedAutoCAD Inventor :: Adding Sketch To Sheet Metal Part
Oct 12, 2011I am having trouble adding a sketch which is on a dwg file to my sheet metal part. First I created a flat plate sheet metal part.
I also have a sketch on a dwg file that I am trying to transfer to the surface of the sheet metal plate. I initiated a sketch on
the sheet metal part thinking I couls open the sketch on the dwg part and do a copy and paste. That did not work.
Second I tried to insert the dwg file but when I search for the dwg file under the insert function, there are no dwg files shown.
AutoCAD Inventor :: How To Create Sheet Metal Part By Mirroring
Jan 23, 2012I have a sheet metal part. It is a machine door with four edge flanges. I have mirrored this part. The origin part has flat pattern while the mirrored creates the folded pattern.
It still folded even when origin is in flat pattern.
AutoCAD Inventor :: Double Curves On Sheet Metal Part?
Feb 6, 2013The part in the attachment was made in catia. The main face is curved in two directions. In my language we call this a "double curved surface" this is possible to generate a flat pattern from in catia. How to do this in inventor?
View 3 Replies View RelatedAutoCAD Inventor :: Unfold Non-planar Sheet Metal Part
Oct 31, 2011I created a part that spans between two other pieces. The original part model does not have a twist in the "flat" surfaces, so it unfolds just fine, but it also does not represent the way the actual part fits, so it is difficult to determine if any other parts are fitting correctly up to it.
I had a problem getting a part to unfold before, and I was shown a method of creating a surface body and a thicken, which I have done with this part, but as of yet have had no success unfolding this part.
Is there anything that I can do since the sides are twisted and not planar?
AutoCAD Inventor :: V-shape Bent Sheet Metal Part
May 30, 2013I have a sheet metal part which is bend to a v-shape.
I want to have a cut out across the bend area. How to project that in to a flat pattern and cut out the relative opening size in the part.
AutoCAD Inventor :: Split Sheet Metal Part (Right / Left)
Jun 21, 2013I have a sheet metal part drawn up that I can't manufacture as modeled. The solution is to convert it from a two bend part into two single bend parts that will then be welded together. (I have an iLogic configurator that spit it out or else I would have drawn it right in the first place) Normally I would split it into two solids and derive them into two parts, but because Inventor still doesn't support multi-body sheet metal (this is something I curse about daily, by the way...) I would have to convert it to a standard part first.
The problem here is, I have a ton of edits done to my flat pattern. I have an extruded tab that's needed for my press brake operator that later gets cut off, and I have a fairly complex sketch that I use to program my laser with etch lines for my welders to use. How I can accomplish converting this into right/left parts without having to redo my flat pattern edits?
AutoCAD Inventor :: Can't Change A Dimension In A Sheet Metal Part
Jul 31, 2012I need the dimension of .5 to become .25.It won't work, probably because it is the same dimension of Sheet metal Tickness.
View 3 Replies View RelatedAutoCAD Inventor :: Curved Bend In Sheet Metal Part
Dec 26, 2012Can a curved section with bend be applied to sheet metal part.I make extrusion for easier clarity.I am wanting to place the curved section (extrusion for demonstration purpose) with bend in sheet metal part but all created in the sheet metal environment.
View 6 Replies View Related