AutoCAD Inventor :: Place Ordinate Dimension To Theoretical Sharp Corner
Aug 19, 2003
I'm trying to place my ordinate dimension to a theoretical sharp corner and the dimension will only go to the end of the arc (see pict). I try and drag the dimension end point by selecting the end of on line and dragging it over, select the other line and drag it till the two yellow dots meet at the intersection.
When I let go of the mouse button to place the dimension it pops to one side or the other of the arc.
There was a message on here about using Ordinate Set to create an ordinate dimension to an apparent intersection and I've managed to do that, but is there a way to use just Ordinate to dimension to an apparent intersection? I've tried dragging and right click menu but no luck.
I have been using the ordinate set command to place set dimensions on an Inventor drawing in version 2012, I was looking for a similar way to rapidly add dimensions for hole diameters .
I can put a regular dimension to an intersection, but when I rmb I do not have the intersection option when placing an ordinate dimension. Is there another way to go about putting an ordinate dimension to an intersection?
Inventor 2009....how to remove an Ordinate dimension (not Ordinate Dimension Set). It seems you can only make one per view. And you can only edit the dimension, i.e. the Origin symbol, but not delete it !? Don't know if there is a change from previous versions of Inventor to 2009.
I am running Inventor Professional 2011 and I have horizontal ordinate dimension, and what I need is to have Text above the Dim line and dimensions beneath it.
How could I edit each ordinate dimension to basic or add for the selected dimension a tolerance? Is it possible to edit each ordinate dimension individually? How could I get the value of the selected dimension?
How to rotate ordinate dimension text in Inventor 2014? Currently the dimensions are horizontal but I would like them to line up with the dimension lines (top and bottom dimensions are vertical)
how to set my origin point to a hole center. When you create the first ordinate dimension, you have to set the origin marker. For the upper view, I want to set the origin to be the same as the view below it. I can set it to the end of one of the hidden lines from the hole, but I can't seem to set the origin to the center of the hole.
dimension bend parts with corner intersection. Is there any option in Autodesk Invenor Drawing so that i can give dimensions as shown in attached image.
I am working with a point cloud and want a dimension that will call out the Z value of a selected node. Is there a way to adjust an ordinate dimension to report the Z value instead of Y? If not, is there another way to do this?
I am drawing ordinate dimensions in blocks and then I am getting the geometric extents of these blocks, if the block contains the dimension, the extents are much larger than expected. What may be the cause?
See the attached drawing, the lines are connecting geometric extents MinPoint and MaxPoint. For the blocks that don't have dimension in them, the extents are correct.
I have attach one drawing if you open and copy this from one place to place then dimension is automatically increases. can i know how this increase or what type of this dimension it is.
Currently, when I do drawings, I give my machinists drawings with each point, and they program their machines. To do that, they calculate the round part diameters, which is basically 5" - 2x<Dim>.
I'd like it if I could give them drawings with the real number, and in parenthesis next to it, 5-2x<Dim>.
I've attached a jpg of what I normally give them and how I'd like it to look. Is this something do-able via a macro or something?
We're having a problem with Ordinate dimensions. When we dimension to a radius corner, we dim to the "implied intersection" of the two lines, rather than to the center of the radius. We make a sketch with the two "tick marks", then dim to the intersection of the tick marks.
Ordinate dimensions are not allowing us to pick the intersection: it wants to put two (or three) dimensions, one to each end of one or the other tick marks (see attached). We use Ordinate dims about once a year, but I'm sure I remember being able to ordinate dimension to the tick marks.
I have had to revise a part that someone else created at some earlier date.They used the ordinate dimensions, which works perfectly and looks good.
I have had to add some holes to this part, but can not figure out how to add more dimensions to the existing ones, outside of deleting the dimensions and dimensioning them all over again.
How do I add more ordinate dimensions to the existing?
I design molds for the rubber industry and I was using Acad 2000; I am just now starting to use inventor. I need to used the ordinate dimensioning although I need the dimension to be given as a diameter and not as a radius. Is there anyway to scale the ordinate dimension automatically as 2:1? This way when I give the prints to the tool room they don't have to manually double every diametrical dimension. The prints that I draw only show half of the mold, there for needing a 2:1 dimension scale.
We use ordinate dimensions for all holes in parts. Unfortunately there seems to be features frequently left out of ordinate dimension mode. For instance, by default Inventor uses center and quadrant object snaps. Unlike in normal dimension mode, there is no right click option for disabling quadrant snaps. This is a constant annoyance, especially when dimensioning a print with a lot of holes. Is there any other way or hidden setting to disable the quadrant snap? In addition, add member is missing from the new "marking menu" completely so we have to enable the old right click menu to get it back. Are we the only ones using ordinate dimensions?
I'm detailing a simple square plate with a good number of holes in it. I create an ordiate set running vertically along the LH edge and select the holes that are close to that side. Origin is the lower LH corner. Works great, easy.
The holes that are closer to the RH side though I'd like to show on that side. So I go to create a second ordinate set for the RH side and choose the lower RH corner as the origin and choose my holes that are close to that edge. The 2nd set will automatically show a second "0.000" dimension on the bottom edge and I can't supress it by right clicking.
Is there a better way to do this? What I've done now is to not use a set but just choose ordinate dimension and go from the opposite edge, which works.... But alignment is better with a set.
Is there a way to override a dimension and have it shown as a GD&T Basic dimension. I can override a dimension with the text option but not with a box around the letter. It sounds strange to do this but the letter represents a dimension in a chart format that are Basic dimensions.
I am trying to fold a sheet into an "L" shape (using the the Fold command) but i would like to have the inside of the bend to be sharp and not a radius like on the outside. Is there any way that i can achieve this?
I have a banner heading that is more or less outlined text. I want to give all the corners a rounded corner and at the moment would just do it all by hand, one at a time. So I want to go from a to b:
But I would like to find an easy way to make all corners the same diameter regardless of the angle too.
How can I create a hem in a corner? The default setup overlaps them and throws an error. A simple "miter" will correct the problem, but I cannot figure out how to do it!
