How could I edit each ordinate dimension to basic or add for the selected dimension a tolerance? Is it possible to edit each ordinate dimension individually? How could I get the value of the selected dimension?
View 2 RepliesThere was a message on here about using Ordinate Set to create an ordinate dimension to an apparent intersection and I've managed to do that, but is there a way to use just Ordinate to dimension to an apparent intersection? I've tried dragging and right click menu but no luck.
I'm using Inventor Professional 2012.
Is there a way to override a dimension and have it shown as a GD&T Basic dimension. I can override a dimension with the text option but not with a box around the letter. It sounds strange to do this but the letter represents a dimension in a chart format that are Basic dimensions.
View 9 Replies View RelatedI can put a regular dimension to an intersection, but when I rmb I do not have the intersection option when placing an ordinate dimension. Is there another way to go about putting an ordinate dimension to an intersection?
View 9 Replies View RelatedInventor 2009....how to remove an Ordinate dimension (not Ordinate Dimension Set). It seems you can only make one per view. And you can only edit the dimension, i.e. the Origin symbol, but not delete it !? Don't know if there is a change from previous versions of Inventor to 2009.
View 9 Replies View RelatedI am running Inventor Professional 2011 and I have horizontal ordinate dimension, and what I need is to have Text above the Dim line and dimensions beneath it.
View 5 Replies View RelatedI am using inventor 2012. Is there a way to ordinate dimension angles? For example dimensioning an irregular bolt pattern in a flange.
View 3 Replies View RelatedHow do I rotate my value(s) on the vertical ordinate dimension vertical?
View 9 Replies View RelatedHow to rotate ordinate dimension text in Inventor 2014? Currently the dimensions are horizontal but I would like them to line up with the dimension lines (top and bottom dimensions are vertical)
View 1 Replies View Relatedhow to set my origin point to a hole center. When you create the first ordinate dimension, you have to set the origin marker. For the upper view, I want to set the origin to be the same as the view below it. I can set it to the end of one of the hidden lines from the hole, but I can't seem to set the origin to the center of the hole.
View 5 Replies View RelatedI'm trying to place my ordinate dimension to a theoretical sharp corner and the dimension will only go to the end of the arc (see pict). I try and drag the dimension end point by selecting the end of on line and dragging it over, select the other line and drag it till the two yellow dots meet at the intersection.
When I let go of the mouse button to place the dimension it pops to one side or the other of the arc.
When a Basic Tolerance is used to dimension - can the size of the containing box be adjusted?
I understand this is set as a percentage of the text size - where is this value & can it be edited?
I would like to overide the dimension value with a letter - Dim "A" etc. but the overide box will not accept an alphabetical input. At present, the only way I can get around this is by sketching the basic dimension box separately.
View 9 Replies View RelatedI am working with a point cloud and want a dimension that will call out the Z value of a selected node. Is there a way to adjust an ordinate dimension to report the Z value instead of Y? If not, is there another way to do this?
View 4 Replies View RelatedI am drawing ordinate dimensions in blocks and then I am getting the geometric extents of these blocks, if the block contains the dimension, the extents are much larger than expected. What may be the cause?
See the attached drawing, the lines are connecting geometric extents MinPoint and MaxPoint. For the blocks that don't have dimension in them, the extents are correct.
Currently, when I do drawings, I give my machinists drawings with each point, and they program their machines. To do that, they calculate the round part diameters, which is basically 5" - 2x<Dim>.
I'd like it if I could give them drawings with the real number, and in parenthesis next to it, 5-2x<Dim>.
I've attached a jpg of what I normally give them and how I'd like it to look. Is this something do-able via a macro or something?
The drop down arrow and check mark have disappeared from my Edit Dimension Dialog Box. What are the setting to turn those back on?
View 4 Replies View RelatedI am using Inventor 2010 Professional Student. I have drawn and extruded on a plane. I need to move this plane to a new measurement (from -45 to -47). When the Edit Dimension box appears, I type the new measurement in, but the plane wont move. I have a lot of construction sitting on this plane, but it is in the wrong spot.
View 2 Replies View RelatedSeen this recently? Using Inventor 2012 SP1 on Windows 7, 64 bit. If we go back into a previously created sketch and edit or add a dimension, upon clicking the green check mark to complete the dimension edit, the sketch exits back to the modelling environment, meaning we have to edit the sketch again to continue with other changes. Obviously no big deal if I'm only editing one dimension, but how often does that happen?
This started happening prior to SP1 being installed. We have this happening on multiple computers (all with the same hardware specs) in our office. I don't believe it to be a hardware or driver issue, but I am wondering if it is a process issue. For example, we use project geometry a lot, even projecting from other parts within an assembly (non-adaptively). We also work on SAT file models, rather than geometry initially created from Inventor itself.
Inventor 2013 Product Design Suite
Vault Professional 2013
Windows7 x64
Autodesk Inventor Certified Professional
Is there any way to set that 'edit dimension' window/box in the sketch environment so that it opens to the length of the parameter being used? All my models for our library items are entirely controlled by Excel sheets and the names of the parameters are often quite lengthy. It's very annoying to have to drag the edit dimension box wider each time and push home or end to see everything.
View 4 Replies View RelatedI have the "Edit dimension when created" option unchecked in my application settings but it still does it anyway. How do I fix it?
Inventor 2013
Windows XP
I have three workplanes. All three were created the same way (offsetting an existing workplane). I want to change the offset dimension. I can on one of the planes, but on the other two, I have to "Redefine Feature". There is no Edit dimension available in the menu.
One plane like this:
Two planes like this:
Why is it different?
I have been using Inventor 2013 for a few weeks now and for the life of me I can not work out how to turn off the automatic "Edit dimension when created" .
I do know that there are "Edit dimension when created" checkboxes in both the Edit Dimension window and under Application Options. But everytime I restart Inventor, the program seems to forget that particular custom setting and always switches "Edit dimension when created" back on. So that on the first dimension I create, the Edit Dimension window pops up.
For additional info Inventor remembers many of the other custom settings (e.g. compact tool bar, active button on the Quick Access Toolbar, etc...)
I cannot edit a dimension that I add to a drawing, IV simply ignores my request when I select Edit from the shortcut menu. This is not a retrieved dimension. My only workaround has been to edit the dimension properties in the part file to display as I would like on the drawings.
I've checked the application options, under Drawing tab, I do have "Edit dimension when created" checked, yet IV does not display the edit dialogue box upon initial creation of the dimension.
If I double click a workplane in the browser, the edit dimension dialog comes up half way off screen, does not remember the screen position if I move it, so it has to be repositioned every time. Seems to be tied to the browser position.
View 9 Replies View RelatedI am trying to edit the placement of vertical text within a dimension line - I wish for the text to be outside the dimension line not inside.
View 4 Replies View RelatedIn 2010 and previous releases I recall being able to show the feature dimension by right clicking "Show Dimensions" and then being able to double click on any visible dimension and change its value. I don't see this behavior in 2012. Is there a setting to turn this on?
View 7 Replies View RelatedWe're having a problem with Ordinate dimensions. When we dimension to a radius corner, we dim to the "implied intersection" of the two lines, rather than to the center of the radius. We make a sketch with the two "tick marks", then dim to the intersection of the tick marks.
Ordinate dimensions are not allowing us to pick the intersection: it wants to put two (or three) dimensions, one to each end of one or the other tick marks (see attached). We use Ordinate dims about once a year, but I'm sure I remember being able to ordinate dimension to the tick marks.
I have had to revise a part that someone else created at some earlier date.They used the ordinate dimensions, which works perfectly and looks good.
I have had to add some holes to this part, but can not figure out how to add more dimensions to the existing ones, outside of deleting the dimensions and dimensioning them all over again.
How do I add more ordinate dimensions to the existing?
I design molds for the rubber industry and I was using Acad 2000; I am just now starting to use inventor. I need to used the ordinate dimensioning although I need the dimension to be given as a diameter and not as a radius. Is there anyway to scale the ordinate dimension automatically as 2:1? This way when I give the prints to the tool room they don't have to manually double every diametrical dimension. The prints that I draw only show half of the mold, there for needing a 2:1 dimension scale.
View 9 Replies View RelatedI use ordinate dimensioning on most all the drawings that go to our shop, but I've run into a problem setting 0,0 on one part.
Along the left side, is a straight edge, but the zero point along the bottom will be a point.
How do I use the point as my zero surface?
Lenovo Think Pad
Windows 7 SP 1
64 Bit.
Inventor 2013
ACAD Mechanical 2013