I would like to overide the dimension value with a letter - Dim "A" etc. but the overide box will not accept an alphabetical input. At present, the only way I can get around this is by sketching the basic dimension box separately.
View 9 RepliesIs there a way to override a dimension and have it shown as a GD&T Basic dimension. I can override a dimension with the text option but not with a box around the letter. It sounds strange to do this but the letter represents a dimension in a chart format that are Basic dimensions.
View 9 Replies View RelatedAt work we occasionally find the need to override a dimension with a text description. Is it possible to stack this text?
View 5 Replies View RelatedI am using the following in the text override field for a dimension:
3'-8S1/2"
And this creates 3'-8 1/2" with the fraction as a horizontal format. What I want is a diagonal format for the fraction. What is the proper syntax for this.
Is it possible to override a dimension with some sort of formula or function that relates to the length of the dimension?
A simple linear scaling might be possible by inventing a new unit with the appropriate conversion ratio, but that wouldn't work. What I need for the dimension to display a length 400 less than the actual length.
How could I edit each ordinate dimension to basic or add for the selected dimension a tolerance? Is it possible to edit each ordinate dimension individually? How could I get the value of the selected dimension?
View 2 Replies View RelatedWhen a Basic Tolerance is used to dimension - can the size of the containing box be adjusted?
I understand this is set as a percentage of the text size - where is this value & can it be edited?
How I can check/uncheck the override text model check box in tolerance dialog (for a dimension in a .idw document), in a DLL add in. Is possible, or inventor api not include this possibility.
View 7 Replies View Relatedwhy every time I use the DAL shortcut, I get a dimension style override appear? Yet it doesn't do it when i use DIMALI or the DIMALIGNED button?
I've searched extensively for a solution to this yet I can't find a solution that works. The >Drawing Setup>Scale tab doesn't seem to exist in this version, and I've tried setting all the CreateDimOverride values in the registry to 0, but even that isn't working.
AutoCAD 2012
I need to override a dimension and I need it to be a diagonally stacked fraction (8 1/4). How do I do this?
I know there is a box in properties for text override, but it won't stack my fraction for me.
My goal is to be able to select a line and a dimension and then have the line's length appear as the text override for the dimension. I have the code to substitute the variable "dist" for the dimension text:
(setq dimselected (entsel "
Select Dimension:"))
(setq newlength dist)
(command "dimedit" "n" newlength dimselected "")
but am having problems extracting the line's length to the variable and setting setting it equal to the variable. To make things more interesting, the value needs to be in inches with fractional inches accurate to 1/16".
I want to doubleclick on a dimension and have the DIMRND override appear
I can't figure out what command I need to customize the doublclick CUI
I wrote the code below (allow the user to pick points in different viewports and then override an existing dimension's text with the difference in X values. The (hopefully) last issue is that the fractions should be vertically stacked and at 100% text size.
(defun c2text ()
(command "mspace")
(setq p1 (getpoint "Select left point "))
[Code]....
I like using the edit label text in the lable styles to add additional text and information.
I can turn on / off the backroung mask for all the style but not each.
Is there a way to turn on / off the backround mask of each layout text.
I'm using civil 3d 2012 and testing 2013.
What is the difference between an Override and a Child Override?
Why do some sections have Override Check Boxes but no Child Override Arrows, and vice versa?
What happens when you click a Green Check Mark in the box?
What happens when you click a Red "X" on the arrow?
HP DV7 Laptop
Intel Core i7-3820QM 3rd Generation Quad Core 2.7 GHZ CPU
16 GB DDR3 RAM ( 2 DIMM ) / 180 GB SSD
Nvidia GeForce 650M Graphics w/2 GB Memory
Windows 7 Professional 64 bit / AutoCAD Civil 3D 2014
I'm using Sheet Set Manager in Autocad 2011. I'm using 'page setup override', and as plot area 'print extents'. So far, so good. Until someone forgets something outside the title block, and the extents feature is not good anymore (several people working in the same projects).
So, I decide to use as plot area 'Layout' instead, typing the X & Y to determine the area to be plotted.
Now, the setup "override" doesn't override. It’s using the drawing plot area from the drawing itself, which completely defeats the purpose. Am I missing something?
I am having problems with changing the height of the dimension text. I have tried going into the style editor and changing the text height in there and then saving it. The number for the height that I changed stays saved however the actual text height on the drawing does not, not even after I tell it to update.
View 3 Replies View RelatedHow do you add text before a dimension in the idw environment? For example, I have a dimension that shows 40".... I want to add text before it to say something like.... " 8 Spaces at 5" = 40" ".... The 40 would be the default dimension value, everything else I want to add to the dimension... I have added tons of text information behind default dimension values, this is the first time I need to add the text before the value and cannot figure out how to get it to work...
Example:
oLinDim(3).Text.FormattedText = "8" &" SPC'S AT" & vbCrLf & "5 = "
this adds text after the default value of 40...
I'm trying to modified (override) the surface label components using vlisp, similar to using text override, I pick the label, and found the text component, but it's seem I found the default, they all changes, plus I didn't see the override text.
where the override text and/or indivisible label property are stored?
I know it is easy to enter special characters in using “%%” escape sequence. However, if I am not entering in single or multiline text, but rather in a dimension annotation’s “override” field, I found that the newly entered text completely overrides the original dimensional annotation.
For example, if originally I had a diameter of 7.98, and I would like to put a Φ sign in front of it to make Φ7.98, but it seems that there is no way to preserve the original content of 7.98 together with the Φ sign.
Is it possible to keep the original measurement within the string? What is the special character representing the original measurement?
I have a dimensioning problem. I have dimensions that I cannot modify as I normally do. I do not know what setting is stopping me but here is what it is doing. I add a dimension to a part. I then edit it to add 2X in front if it. It will then put it on top of the dimension. If I put it behind the text, it then goes beneath the dimension. There is no way to add text and it would actually appear on the same line as the dimension.
View 3 Replies View RelatedI have a user that wants to be able to either link dimensions to other dimensions, such as a ref dim to a live dimension or while inserting text in a note on the drawing to be able to list a dimension within that text string to a dimension of the part so as the part updates, the dimension in the text sting updates.
View 9 Replies View RelatedI am currently wanting to have my horizontal dimensions above the dim line and the postfix text below.
I can set this in inventor but when i do a save as autocad.dwg (2007) the postfix text either ends up above the line or puts a double space below the line.
What to put in the override box to start a second line of text? its autocad 2013
View 2 Replies View RelatedI have a text style called standard2 in a drawing, I put all text whether it be in blocks, dimensions, mtext, dtext everything into the style I want. Purge the drawing which gets rid of the style, save it, close it then reopen. I then get Standard style reset, existing objects moved to standard2 and now the standard2 style is back in the drawing. This problem is only affecting some drawings and not all drawings.
View 1 Replies View RelatedIs there any way to change the size of dimension text in sketch? My students cannot see the dimension when I demonstrate the sketch.
View 9 Replies View RelatedSee the attached image. I'd like to rotate the text of the dimension shown to be horizontal relative to the page.
The best I've found in searching for a solution is here (on the bottom):
[URL].....
however, following those instructions actually changes the dimension value to the distance projected in the plane of the sheet.
I have been working on some spec sheets and, ideally, would like the text size larger to improve readability. When creating text, changing the size is as easy as editing the text and changing the size. With a dimension, however, that method doesn't work. Is there an easy way to change a dimension's text size without having to make a change in the styles??
View 2 Replies View RelatedI have a set of dimensions on my drawings however where the dimension is displaying as 6mm in a vertical plane this is quite difficult to distinguish as it could be misread as 9mm. Is there a way to add an underscore mark on the 6 so no mistake can be made as to it being a 6 and not a 9 ?
View 9 Replies View RelatedI have a problem with the display of the text string when creating a dimension, been through all the options within the styles manager however no option to display the text to the right of the dim line, it always defaults text to inside the dim line, where the option to toggle alignment of text on a vertical dimension line is ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I'm aware this has been raised before, see [URL] however this was way back in 2004. Surely there must be a solution by now!
View 1 Replies View Related