AutoCAD Inventor :: Re-centre Dimension Text In IDWs?
Apr 10, 2013I'm aware this has been raised before, see [URL] however this was way back in 2004. Surely there must be a solution by now!
View 1 RepliesI'm aware this has been raised before, see [URL] however this was way back in 2004. Surely there must be a solution by now!
View 1 RepliesIs there a way to dimension chamfers like in the second pic below so that the values update. You can do a linear dimension and then alter the text and try and find that dimension in the list, but the chamfer tool works well with two clicks but you only get it with a leader. I would like the same function but with a linear dimension sometimes. It would be good if you could choose it. 45° is probably not a really good example, but the leader version is not always so clear.
View 1 Replies View RelatedI am working on a new concept design for one of our customers. A critical design parameter is the weight of each of several sub-assemblies.
I have an idw of the top level assembly where I have added Parts Lists of each of the critical subs to show the weight of the components used in each sub assembly. I would like to add a line at the bottom of each Parts List that shows the total weight of that sub assembly. I would also like the header of the Parts List to display the Part Number (from the sub assembly iprops).
Is there a way to get why I want from IV? I am currently using IV 2012. I have attached a .pdf mockup of what I want.
I've inserted <CREATION DATE> into the custom title blocks I normally use for drawings. It displays the date without preceding zeros (example: June 18, 2013 is displayed as "6/18/2013" instead of "06/18/2013"). How can I change this?
View 2 Replies View Relatedwhat is the best workflow to ensure that i am printing the most latest idw without opening the idw one by one?
View 4 Replies View RelatedWhen working in detail drawings inventor progessivly gets slower, the more information on the drawing, the worse it gets.I was watching the task manager, For ANY command, the 1st core runs at 100% for up to 30 seconds, while this is happening, Inventor is dead.
EG, add a revision row, delete a symbol, zoom in or out, pan, add a dimension, move a leader etc.for each command/move takes 10 to 30 seconds to get control, it took me 45 minutes, to add a revision row and print 15 drawings this morning.
we have simple assemblies with bolted weldments and few misc. parts. most assemblies are 3-20 parts a typical project would have:
-a few laser cut parts, some plastic and hardware. these items need to have part drawings sent to a vendor.
-some in house cretaed parts that need a drawing
-assembly drawing for our shop
i think i am seeing that by having one single IDW its getting hard to send all the drawings to the people that need them. an example would be if a vendor calls about one part, i may send him a 4 page PDF and tell him to look on sheet 2.the other issue that i have is that my standard work flow is:
-design a product
-hand of to another dept for them to enter SKU numbers for parts and assemblies.
so my file names never match what the final product name is. i have been using fields in the iPROP, but it would be nice to revise file names when SKUs are created. im guessing vault would be the tool for something like that?
To increase the speed of production, I like to generate idws of flat patterns from assembly. The following iLogic rule work fine inside a metal sheet (I had to create flat pattern before run this rule).
Imports Inventor.ViewOrientationTypeEnumImports Inventor.DrawingViewStyleEnumDim oDrawingDoc As DrawingDocumentDim oPartDoc As DocumentDim oSheet As sheetDim oTG As TransientGeometryDim oView1 As DrawingViewDim oOptions As NameValueMapoPartDoc
[Code] ........
But from an assembly there are some problem ( firstable I'm not an expert of vba and ilogic)
Imports Inventor.ViewOrientationTypeEnumImports Inventor.DrawingViewStyleEnumfmgr = ThisApplication.FilemanagerFor Each file In fmgr.filesdoc = ThisApplication.Documents.ItemByName (file.fullfileName)compdef = doc.ComponentDefinition' For each assembly or subassembly'If (doc.documenttype = 12291) Then For Each occ In compdef.Occurrences' For sheet metal or part
[Code] ........
How can i create a detail identification balloon in the idw's that prompt the user for the detail number and reference? Up to now we have been using sketched symbols balloon but are required to add the text manually as a second step. Is it possible in Inventor to combine this like easily done in Autocad.
AutoCAD 2011
Inventor Simulation 2011
Vault Professional 2012
I am having problems with changing the height of the dimension text. I have tried going into the style editor and changing the text height in there and then saving it. The number for the height that I changed stays saved however the actual text height on the drawing does not, not even after I tell it to update.
View 3 Replies View RelatedHow do you add text before a dimension in the idw environment? For example, I have a dimension that shows 40".... I want to add text before it to say something like.... " 8 Spaces at 5" = 40" ".... The 40 would be the default dimension value, everything else I want to add to the dimension... I have added tons of text information behind default dimension values, this is the first time I need to add the text before the value and cannot figure out how to get it to work...
Example:
oLinDim(3).Text.FormattedText = "8" &" SPC'S AT" & vbCrLf & "5 = "
this adds text after the default value of 40...
I have a dimensioning problem. I have dimensions that I cannot modify as I normally do. I do not know what setting is stopping me but here is what it is doing. I add a dimension to a part. I then edit it to add 2X in front if it. It will then put it on top of the dimension. If I put it behind the text, it then goes beneath the dimension. There is no way to add text and it would actually appear on the same line as the dimension.
View 3 Replies View RelatedI have a user that wants to be able to either link dimensions to other dimensions, such as a ref dim to a live dimension or while inserting text in a note on the drawing to be able to list a dimension within that text string to a dimension of the part so as the part updates, the dimension in the text sting updates.
View 9 Replies View RelatedI am currently wanting to have my horizontal dimensions above the dim line and the postfix text below.
I can set this in inventor but when i do a save as autocad.dwg (2007) the postfix text either ends up above the line or puts a double space below the line.
Is there any way to change the size of dimension text in sketch? My students cannot see the dimension when I demonstrate the sketch.
View 9 Replies View RelatedSee the attached image. I'd like to rotate the text of the dimension shown to be horizontal relative to the page.
The best I've found in searching for a solution is here (on the bottom):
[URL].....
however, following those instructions actually changes the dimension value to the distance projected in the plane of the sheet.
I have been working on some spec sheets and, ideally, would like the text size larger to improve readability. When creating text, changing the size is as easy as editing the text and changing the size. With a dimension, however, that method doesn't work. Is there an easy way to change a dimension's text size without having to make a change in the styles??
View 2 Replies View RelatedI have a set of dimensions on my drawings however where the dimension is displaying as 6mm in a vertical plane this is quite difficult to distinguish as it could be misread as 9mm. Is there a way to add an underscore mark on the 6 so no mistake can be made as to it being a 6 and not a 9 ?
View 9 Replies View RelatedI have a problem with the display of the text string when creating a dimension, been through all the options within the styles manager however no option to display the text to the right of the dim line, it always defaults text to inside the dim line, where the option to toggle alignment of text on a vertical dimension line is ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.
View 3 Replies View RelatedI am having trouble changing the dimension text size of any 2d or 3d sketch..
the default has changed for some reason (i might have accidentally changed it while looking for something the other day) but i need to know how to change it back.. I can't do anything without a dimension getting in the way!
How do you change the dimension text size in an .idw 2D drawing? The dimension text and arrowhead size is too small and I would like to make it sligthly larger.
View 3 Replies View RelatedHow to rotate ordinate dimension text in Inventor 2014? Currently the dimensions are horizontal but I would like them to line up with the dimension lines (top and bottom dimensions are vertical)
View 1 Replies View RelatedI would like to overide the dimension value with a letter - Dim "A" etc. but the overide box will not accept an alphabetical input. At present, the only way I can get around this is by sketching the basic dimension box separately.
View 9 Replies View RelatedHow do i increase the dimension text height in my drawing.When i go thro the styles and standards editor and increase the text height all the text in my sheet border also increases.Surely there must be a way to isolate the dimension text from the sheet text.
View 2 Replies View RelatedCan i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
View 6 Replies View Relatedevery one now a day i am making isometric drawings so i m little bit confuse in that i am using dimension and change the oblige angle text of dimension so is it right way or not ????
View 9 Replies View RelatedAll options relating to the content centre seem to have disappeared. When i try and add a structural shape via manage tab / author - I get the following message Structural Shape Library cannot be found or Content Centre isnt logged in, please check it and try again. i have checked the active project and it includes the content centre location. Also in an Assembly I do not have the option of placing from content centre.
View 2 Replies View RelatedWe have just updated to Inventor 2013 (from 12) and none of our models which contain BSi libraries are working. I understand BSi is within 'Other' CC library.
I have tried copying the idcl files from 2012 CC libraries into into 2013 but Inventor 2013 is not recognizing them. Within the 'update libraries' dialogue box the are listed in red and 'not available'
I've been floundering around for a few days now trying various fixes from the net without success.
For a while now whenever I open a new assembly the default is place from content centre, I use the drop-down and select place.
Today I needed place from content centre and it just doesn't come up.
It is loaded/automatic in the addins.
If I open my projects, in the bottom right corner where I would usually click to acess my installed libraries, I click but it does nothing!
I also noticed studio and BIM are greyed out, but I have started to play with Showcase so not really a problem. I need to set up a read/write library soon, so it's going to be a problem.
I am trying to edit the placement of vertical text within a dimension line - I wish for the text to be outside the dimension line not inside.
View 4 Replies View Related