AutoCAD Inventor :: IV 2012 / Cannot Edit General Dimension In Drawing
Aug 27, 2013
I cannot edit a dimension that I add to a drawing, IV simply ignores my request when I select Edit from the shortcut menu. This is not a retrieved dimension. My only workaround has been to edit the dimension properties in the part file to display as I would like on the drawings.
I've checked the application options, under Drawing tab, I do have "Edit dimension when created" checked, yet IV does not display the edit dialogue box upon initial creation of the dimension.
View 9 Replies
ADVERTISEMENT
May 21, 2012
In 2010 and previous releases I recall being able to show the feature dimension by right clicking "Show Dimensions" and then being able to double click on any visible dimension and change its value. I don't see this behavior in 2012. Is there a setting to turn this on?
View 7 Replies
View Related
Jun 22, 2012
I need to modify some of the dimensions (text only) in a standard template of outline drawing for different cases. I tried to identify the dimensions which need modification by using handle.
But after that i have no idea how to change the text in it.
View 8 Replies
View Related
Jun 3, 2013
The drop down arrow and check mark have disappeared from my Edit Dimension Dialog Box. What are the setting to turn those back on?
View 4 Replies
View Related
May 24, 2012
I am using Inventor 2010 Professional Student. I have drawn and extruded on a plane. I need to move this plane to a new measurement (from -45 to -47). When the Edit Dimension box appears, I type the new measurement in, but the plane wont move. I have a lot of construction sitting on this plane, but it is in the wrong spot.
View 2 Replies
View Related
Dec 9, 2011
Seen this recently? Using Inventor 2012 SP1 on Windows 7, 64 bit. If we go back into a previously created sketch and edit or add a dimension, upon clicking the green check mark to complete the dimension edit, the sketch exits back to the modelling environment, meaning we have to edit the sketch again to continue with other changes. Obviously no big deal if I'm only editing one dimension, but how often does that happen?
This started happening prior to SP1 being installed. We have this happening on multiple computers (all with the same hardware specs) in our office. I don't believe it to be a hardware or driver issue, but I am wondering if it is a process issue. For example, we use project geometry a lot, even projecting from other parts within an assembly (non-adaptively). We also work on SAT file models, rather than geometry initially created from Inventor itself.
Inventor 2013 Product Design Suite
Vault Professional 2013
Windows7 x64
Autodesk Inventor Certified Professional
View 9 Replies
View Related
May 25, 2012
Is there any way to set that 'edit dimension' window/box in the sketch environment so that it opens to the length of the parameter being used? All my models for our library items are entirely controlled by Excel sheets and the names of the parameters are often quite lengthy. It's very annoying to have to drag the edit dimension box wider each time and push home or end to see everything.
View 4 Replies
View Related
Feb 28, 2013
I have the "Edit dimension when created" option unchecked in my application settings but it still does it anyway. How do I fix it?
Inventor 2013
Windows XP
View 1 Replies
View Related
May 19, 2012
I have three workplanes. All three were created the same way (offsetting an existing workplane). I want to change the offset dimension. I can on one of the planes, but on the other two, I have to "Redefine Feature". There is no Edit dimension available in the menu.
One plane like this:
Two planes like this:
Why is it different?
View 3 Replies
View Related
Jan 23, 2013
How could I edit each ordinate dimension to basic or add for the selected dimension a tolerance? Is it possible to edit each ordinate dimension individually? How could I get the value of the selected dimension?
View 2 Replies
View Related
Nov 15, 2012
when I try to edit a dimension in my Idw's. I normally can double click on the dimension or right click on it and choose edit, but now the window will not pop up. It freezes the screen like the window is open but no window on the screen, almost like it opens off of the screen where you can not see it, the program has been reinstalled but still have the same problem.
View 2 Replies
View Related
Aug 14, 2012
I have been using Inventor 2013 for a few weeks now and for the life of me I can not work out how to turn off the automatic "Edit dimension when created" .
I do know that there are "Edit dimension when created" checkboxes in both the Edit Dimension window and under Application Options. But everytime I restart Inventor, the program seems to forget that particular custom setting and always switches "Edit dimension when created" back on. So that on the first dimension I create, the Edit Dimension window pops up.
For additional info Inventor remembers many of the other custom settings (e.g. compact tool bar, active button on the Quick Access Toolbar, etc...)
View 9 Replies
View Related
Jul 30, 2010
If I double click a workplane in the browser, the edit dimension dialog comes up half way off screen, does not remember the screen position if I move it, so it has to be repositioned every time. Seems to be tied to the browser position.
View 9 Replies
View Related
Dec 13, 2011
I am trying to edit the placement of vertical text within a dimension line - I wish for the text to be outside the dimension line not inside.
View 4 Replies
View Related
Nov 16, 2011
See attached.
I no longer have the option to edit iparts or iassemblies via speadsheet (excel). I'm using Excel 2007. (INV 2012 Sp1)
Is excel functionality part of an addin that I might have turned off accidentally?
I believe it was working in 2012 but haven't really noticed it not working till after Sp1 install till now..
Running 2014 Product Design Suite Ultimate
Windows 7 64 bit
90G OCZ SATA 3 SSD
Core I7 920 processor, ATI HD6970 graphics card, 12G Corsair RAM
View 5 Replies
View Related
Jun 6, 2012
If I zoom in on a small detail in a large sketch and then issue the "edit sketch" command Inventor changes the view to where the origin is visible on the screen. Is it possible to disable this?
View 2 Replies
View Related
Nov 3, 2013
The diametric dimension on the right, dia. 244.9 isn't resembling the real dimension in the weldment.You see in the sketch of extrusion 2 that i gave an internal diameter of 245.
View 9 Replies
View Related
Jun 25, 2013
Is there any way to highlight certain dimensions in a IDW drawing (i.e. color the background of that text yellow)?
View 6 Replies
View Related
Aug 31, 2012
I am using Inventor 2013. For some reason I cannot dimension some of the model entities in the drawing views in an idw file. I can retrieve the model dimensions but it is usually easier to create the dimensions I need in each view. I can select the line, curve, etc. when dimensioning but nothing happens.
After I think about it. What I cannot dimension are lofts that I created with rails. These rails were made up of lines and curves, not polylines. How do I get the sketches for the rails I used for lofting to display in the drawing views so I can dimension those sketches.
View 9 Replies
View Related
Sep 6, 2013
I'm using Inventor 2013. I created an assembly where I did a lot of top down modeling (meaning components in the assembly were created in the assembly. All but a handful of the components are adaptive to other components). When I went to make my drawings for having the components made, I started noticing that some of the dimension values were wrong. I could go into the model and verify the features, but when dimensioning on the drawing it would not match. Furthermore, this didn't occur on every dimmension on the drawing. Not even half of them were incorrect, but it only takes one to really mess up a part.
I've attached a screen shot of what I'm seeing. The 15.2 and 5 dimmension are correct, but obviously those don't add up to 31.37. I know I can manually override this dimmension, but only if I know to do it. I tried to do a drawing of another part in the same assembly and eventually found a similar problem.
Finally, I created a step file of the 1st part (to strip away the adaptivity) and when I created the drawing again, the problem went away.
My question is, is there something I did in the assembly / creation process that would have caused this?
View 4 Replies
View Related
Jul 26, 2012
I'm trying to dimension an ellipse in the Inventor Drawing Feature. I've attached the .idw files. (the .ipt is too large)I am aware that the ellipse doesn't have a constant radius and was wondering what is accepted practice for these dimensions?
I need to first dimension the external elliptical shape (which I'm struggling at), might just add a note.
Secondly I'm trying to dimension the mesh part, its not centrally align to the part and since I can't put a center mark on I'm not sure how I should dimension this...
View 5 Replies
View Related
Apr 16, 2013
My question is to find the dimension in the drawing area
for example
If we observe in the drawing left hand site we can see alphabets in the border area and number at top border area
if the dimension lies between "A" on left hand side and "1" on top border srea
then i want a message the dimension lies on A1
View 1 Replies
View Related
Oct 24, 2013
dimension bend parts with corner intersection. Is there any option in Autodesk Invenor Drawing so that i can give dimensions as shown in attached image.
View 2 Replies
View Related
May 17, 2012
So my problem is that I need to include a line on a part drawing that isn't related to the part itself. I need to be able to override the dimension of the line I sketched so that I can include it in my drawing and update the dimension without having to change anything else on the part.
Basically, I want an iLogic rule to overide a dimension, and I don't know how to do that.
View 1 Replies
View Related
Sep 20, 2013
I have recently drawn a steel construction, and I am now in the process of making the drawings. A problem that occurs is the length of beams used for bracing. When I click the two outer points, the lower dimension in the drawing appears. This is the length of the line between the two points. To be able to dimension properly, I have made a sketch with a straight line, which is perpendicular to one side of the beam. This has been used, with the point on the opposite side, to find the true beam length (and is showed as the upper of the two dimensions in the picture).
View 5 Replies
View Related
Oct 31, 2012
I want to ask how to make the size for the angle in the distance between holes. i use the autodesk inventor 2013, I attach an example like this.
View 9 Replies
View Related
Oct 19, 2012
I was trying to reposition a retrieved dimension in drawing. I was able to position the text, however the dimension line however still stays in its default retrieved position. how I can reposition the dimension line as well?
Dim mydim As Inventor.ObjectCollection
Dim invDimConstraints As DimensionConstraints
Dim invDimConstraint As DimensionConstraint
invDimConstraints = invPartDef.Sketches.Item("MySketch").DimensionConstraints
[Code] ........
View 1 Replies
View Related
Dec 13, 2013
Is there a way to force Inventor to dimension without snapping to various Z heights within a drawing view? I have basic top and side views created however when trying to dimension overall lengths and widths i'm snapping to high and/or low points of the model and getting screwed dimensions.
View 4 Replies
View Related
Feb 13, 2013
How do you change the dimension text size in an .idw 2D drawing? The dimension text and arrowhead size is too small and I would like to make it sligthly larger.
View 3 Replies
View Related
Jan 19, 2012
We have created one Style, but within this Style are two Dimension types (Dual and SIngle)
When a drawing from a model is created it defaults to the Dual Option and we can only select the Single Dimensions by individually selecting the Dimension and editing to Single Dimension, which can be time consuming.
Is there a way to select the Dimension type for the whole drawing?
View 2 Replies
View Related
Oct 9, 2013
I seem to recall being able to do this in 2013...
Say you've dimensioned something but end up wanting to change the dimension definition points...drag the end point to another location that you want dimensioned.
I thought it used to snap to a new location, but now it will not. I have to redraw the dimension (including all text I added).
Here is what I get when I try to move the dimension definition point:
Here is what I get when I try the auto-reattach feature in "repair". Still nothing to snap to.
View 3 Replies
View Related