AutoCAD Civil 3D :: SSA Max HGL Doesn't Match Between Profile Plot And Table
Aug 22, 2011
It's my first time using SSA, and I had finally created a network and storm that I thought was working properly (using TR-20 routing with an SCS II storm), until I took a closer look at the profile outputs - and noticed that the graphed Max HGL line does not match the Max HGL listed in the table below. The difference was 856.2 on the graph and 858.01 on the table at one my structures, for example.
The ability to import pipe networks is nice in SSA, but if the output data is always this wacky I may have to go give up on SSA and go back to using Hydrocad.
View 9 Replies
ADVERTISEMENT
Mar 5, 2013
(I'm using Civil 3D 2011)
I have a corridor with an associated sample line group, and I have produced some material volume tables to give me quantities for my corridor structures and cut/fill volumes. When I look at the material volume tables they are at a seemingly arbitrary stationing. The sample line group which the material volume tables are (supposedly) based on are on alignment L1000 and they run from station 1133+73 to station 1154+00 every 10 meters. The material volume tables show volumes broken down by stations starting at station 3719+58.66 and runs through to station 3786+08.92. It is sampling at a seemingly arbitrary frequency, there is absolutely no alignment in my drawing that has stations remotely resembling those numbers, and there is definitely no sample line group it could be using that samples an alignment or stationing anything like that shown in the materials volume tables. Here is a quick screenshot of what my material volumes tables look like:[URL]
View 2 Replies
View Related
Sep 9, 2013
Civil 3d 2014.... I have existing surface and a profile with 5 sample lines. All of them are good except 1 sample offset. I can do I quick profile and the profile looks like it should but if I generate an actual profile 90% of the profile is off. I have already tried reoding the alignment but it looks same on either one.
View 2 Replies
View Related
Mar 15, 2013
When making a profile the actual scale of the profile does not match the vertical text. The scale is 1"=40' hor and 1"=4' ver with a 10:1 exageration.
See sketch below
View 1 Replies
View Related
Jul 12, 2013
I have a sheet that has several alignments data referenced and labels applied. Recently some of the alignments changed (slightly extended), I checked the sheet and all of the labels have auto updated. Everything looks good. A Print Preview looks good.
When create the print (to pdf), the alignments that changed and all the labels do not show up. Nothing changed with layers, styles, etc. I tried Synchronize and Refresh from Prospector. I can create another Data Ref but don't want to go thru all the labeling again.
Preview and pdf attached.
C3D 2012
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
View 2 Replies
View Related
Apr 14, 2012
I have a profile view that shows two ditch profiles in it, for right and left ditch. They are similar in elevation, so they overlap some in the profile view. Is there a way to show one of them at a set interval below its actual datum, like say, 5'? Short of drawing in a dummy profile or expolding it - which I'm going to do shortly....
View 2 Replies
View Related
Mar 5, 2012
I have a project in vault (v2011), with surfaces, etc. data referenced into a sheet (neglect workflow for the moment) that displays correctly, print preview's correctly, but when plotted does not show the surface contours of any surface. Additionally, some contour labels and spot labels display CORRECTLY while some spot labels are ??? and some contour labels are not visible.
By the way, the surfaces are in different source files.
View 2 Replies
View Related
Aug 13, 2012
I am running CV3D 2011 on a Windows 7 64 bit workstation. I have a road profile that has a band which labels the existing and proposed profile elevations. For some reason the profile band labels (including the stations) randomly disappear and all you see is the band box. If you REgen they will reappear but will dissapear again when you plot preview and they WON"T plot...even though they are there in the drawing!
Civil 3D 2013 SP2 | Win 7 64-bit SP1
Intel Core i5-2500 @ 3.30GHz, 8GB Ram | ATI Radeon HD 5450
View 4 Replies
View Related
Dec 6, 2013
I have a typical storm sewer pipe network in a drawing by itself with an alignment. I data referenced both of these into another drawing. I draw the pipe network in the profile view I created and the pipes that run with the road show up fine. Every once in awhile there is a lateral storm sewer pipe that runs across the road. When I draw these in the profile view they show up, but, only the pipes that are skewed to the alignment show up. If the pipe is perfectly perpendicular to the alignment it does not show up. I have two styles setup. One main one that shows the inner and outer pipe walls and another one for overrides for the crossing pipes and that stlye has crossing pipe walls turned on.
Why is it though only the skewed pipes show up as ellipses in my profile view but the perpendicular pipes do not?
View 2 Replies
View Related
Oct 3, 2012
profile structure doesn't update when changed. First, the rim to sump value will not change with sump defined by depth and trying to change the sump depth (going deeper and no rules exist). Second, change to define sump by elevation and the sump elevation changes and the grip changes to the correct elevation, but the part outline doesn't change. I've read where the part catalogue location should be updated. I did.
View 3 Replies
View Related
Sep 13, 2013
It is 27 miles of waterline broken into 3 mile segments.The problem is with the profiles that have been cut. The existing ground surface has been sampled along the alignment and multiple profile view made from that alignment. When the alignment changes, the only way that the surface seems to update is to run the "profiles; create profiles from surface command again" at which point it adds a new profile into the profile views reflecting the current surface over the alignment, then the "old" profile must be deleted from the profile views. Everything is set to dynamic, yet certainly is not being very dynamic.
View 4 Replies
View Related
Aug 29, 2013
I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
View 2 Replies
View Related
Mar 27, 2014
In Development module in LR4.4, viewing a Fuji X100s raw file (converted on import to DNG) I tick the box for "Enable Profile Corrections" under "Lens Corrections," and select "Auto" from the "Setup" menu. I would have thought that LR would pick up the X100s profile, but no, nothing happens. If I choose "Fujifilm" from the "Make" dropdown, I can find the X100 (not X100s) profile manually. The profile's probably pretty similar, but still, I'm wondering why my install of 4.4 doesn't have the X100s profile in place?
While I'm at it, I'll ask this too -- I recently bought the new Nikkor 35mm 1.8G ED (the new full frame 35mm Nikon lens, not the trusty 35mm 1.8DX) and there's no profile for that lens in my LR4.4 either.
Finally, I note that when I choose "Check for Updates" from the "Help" menu in LR, I'm told there are no updates available.
View 3 Replies
View Related
Feb 23, 2012
Is there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
View 4 Replies
View Related
Oct 7, 2013
Units percision is at 1/64".
I have a custom text style set to a height of 3/32"
I have a custom mleader style set to mtext with text set to that style.
The text height setting in the mleader style dialog is 3/32" and grayed out.
Why create an option and then block us from using it?
All new mleaders are being created with a text height of 1/8". Why?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
View 3 Replies
View Related
Jan 11, 2013
I am using Inventor Professional 2013 what im trying to do is create a flat pattern so I can send out to get formed. I need the panel to be 7.75" Width 53.50" Height and 2" Depth. When I click unfold where the 45deg is, it doesnt match up with the bend. Im not sure if its supose to be like that or what lines i need to keep to get the correct mesurments.
View 9 Replies
View Related
Apr 26, 2011
I'm trying to plan an access road which must run at least 2.5m away from an existing fenceline. I've put a few parallel road lines in at 3m distance, but at the fence bends I decided to put some circles at the bend points to give me a 3m radius. When I did this I was suprised to find that the circle extends further than my access road. I've dimensioned them both up, CAD is telling me they're both 3m away but they're clearly not at the same distance.
View 9 Replies
View Related
Feb 18, 2013
I want to know if you can link AutoCad tables to other Autocad tables on different layouts. Say I have ten sheets, each with a table for quantities of pipe length, and one sheet with a total of all quantities. Can I link cells from each separate layout sheet to the main table sheet, so that I can add them all for project totals?
View 3 Replies
View Related
Aug 5, 2013
How do you download the new plot sytles from your page set-up? Where to get it from your autocad file samples or set ups?
View 2 Replies
View Related
May 12, 2011
I've the same problem: in autocad Architecture 2011, in "plot style table", there is no "monochrome.ctb". Just mentioned "none" and "new"; How I can put in monochrome into the plot style table?
View 6 Replies
View Related
Sep 28, 2003
If it is possible to plot points (or a PLine, or a mesh) in AutoCAD from a table of values in EXCEL (columns of x,y,z coordinates).
View 8 Replies
View Related
Apr 11, 2013
My customer is having trouble with the part list feature inside the Inventor 2D drawing.
For example, He has a car assembly file with 4 wheels and alot more subassemblies, then he creates a view representation which only visible for 1 wheel.
When he generates the part list in Inventor 2D drawing, he go to part list >filter setting and set to ‘’Assembly view representation’’ but the quantity for the part list is still showing as 4 as per attachment.
change the value manually inside the part list table?
View 5 Replies
View Related
Sep 4, 2013
Trying to create a dynamic block that will multiply the number of neutral and ground blocks as it's stretched.
My power terminal strips can contain 1 to unknown number of circuit breakers, and each circuit breaker requires a neutral and a ground block.
All the similar items in a stip are grouped together, all the circuit breakers, then the neutrals than the grounds.
So depending on how many circuit breakers I have I'll need the same number of neutrals and grounds, but grouped together.
In the attached block I added the stretch action to move the end cover and end stop of the strip down, but don't know how array/space/stretch the neutrals and grounds so they're grouped together.
The ciruict breakers aren't shown as they can be from different manufacturers and therefore different widths.
Tried attaching my block file but get this error message:
"The contents of the attachment doesn't match its file type."
View 9 Replies
View Related
Feb 6, 2012
Here's my problem: I have a customized plot style table "SK.ctb". I have it saved both in the appropriate folders on my computer and in a shared folder on the network. Usually when I am working in a file and open the plot window, my plot table is available in the list at the upper right "Plot style table (pen assignments)".
Right now I am working in a drawing that was sent to me by another firm. They of course didn't send me their pen assignment tables, not that I really care as I would rather edit the layer colors if necessary, but use my own. The problem is that in the plot window it is only showing their plot styles - none of mine! Theirs are all listed as missing, but I can't get it to even look for the plot tables I usually use.
View 9 Replies
View Related
Jun 28, 2013
When I go to plot, my plot styles table only shows .stb files. I have a bunch of .ctb files that exist in the plot styles folder, and everything is pathed correctly but the .ctb files do not show up in autocad. How can I get these files to be available?
(They do show up in some drawings for some reason though, just not when I create a new drawing file.)
View 2 Replies
View Related
Jun 12, 2012
I've edited the plot style table in the past to do things such as change yellow to print black. I've also successfully used it to select monochrome to print B&W. Currently it's not working. I can select a different plot style, apply it and see it look correct in paperspace. However, when I preview or print it, I still get yellow, printing yellow or if I try monochrome, it will still print in color.
I make sure to click apply to layout and I've also tried restarting ACAD and neither seems to work. I've also tried using the page setup manager and it still prints differently than what I select. Is there some other variable I can turn on or off that I am not aware of?
View 3 Replies
View Related
Sep 17, 2012
Is it possible to copy a line in Plot Style Table, in my case red nr 1, and have two with different linetype?
I have a drawing where this specific line and the text belonging to it should be in red, (line 1) and the lines dashed. If I in my Plot Style Table make line 1 dashed, the text get dashed too.
At the moment I have put another color to the dashed lines, but if there is a way to have two red nr1 lines with different linetype .
View 2 Replies
View Related
Jul 24, 2012
I need to change many drawings from our old Plot Style to a new version.
I was going to use a script to also purge and complete a few other house cleaning items...
what is the best way to change the plot table from old.ctb to new.ctb (they are not named that BTW.)
Civil 2013
View 3 Replies
View Related
Nov 29, 2012
I have a stationing line. I've used the block PTTICL to make ticks. The ticks display perfectly. I'll run through a plot preview and the ticks show on the plot preview. I push plot go to the printer and the ticks are not plotted.
I've checked the layer. They are on a layer that should print.
I've checked the block. The block is created on a layer that should print.
I've run through a number of options regarding the alignment label properties and found "display" to be equal to "true."
Everything else plots just fine. Only the station label ticks refuse to plot. My project is fairly short so the work around was to put a poly line right on top of the tick mark.
AutoCAD Civil 3D 2013.
View 5 Replies
View Related
Oct 10, 2012
I have a table which is linked to a datalink from Excel. The table and contents (text) show up in paperspace; however, only the table frame shows up within the plot preview, or when I try to plot it. The text does not show up.
View 4 Replies
View Related
Apr 20, 2011
What is the best way to setup Plot Co-Ordinates that have a tag that updates as you move the co-ordinate point and also I would like to schedule these points in a table ..
for e.g. :
Plot A
_______________________
E 123456.789 N 123456.789
View 2 Replies
View Related
