AutoCAD Civil 3D :: Surface From Vault Doesn't Plot
Mar 5, 2012
I have a project in vault (v2011), with surfaces, etc. data referenced into a sheet (neglect workflow for the moment) that displays correctly, print preview's correctly, but when plotted does not show the surface contours of any surface. Additionally, some contour labels and spot labels display CORRECTLY while some spot labels are ??? and some contour labels are not visible.
By the way, the surfaces are in different source files.
View 2 Replies
ADVERTISEMENT
Dec 18, 2013
xrefing a drawing that has annotated surface labels spot elevations into a Precise Grading Breakout Sheet, but making sure those labels plot screened. How do I make sure I can plot it screened? I have set the label styles By Layer and the text within that style is set By Layer and the Layer I created for the styles is set to plotstyle screened and color 8, I also made sure that the Precise Grading breakout sheet has the xref layers applicable to those surface labels set to screened plotstyle and color 8.
View 1 Replies
View Related
Aug 22, 2011
It's my first time using SSA, and I had finally created a network and storm that I thought was working properly (using TR-20 routing with an SCS II storm), until I took a closer look at the profile outputs - and noticed that the graphed Max HGL line does not match the Max HGL listed in the table below. The difference was 856.2 on the graph and 858.01 on the table at one my structures, for example.
The ability to import pipe networks is nice in SSA, but if the output data is always this wacky I may have to go give up on SSA and go back to using Hydrocad.
View 9 Replies
View Related
Dec 18, 2013
I've brought a PNG image into a Civil 3D surface model and attempted to drape it on the surface. The image is scaled to the topography when it's first brought in, but when it's draped on the surface it gets placed very small in the bottom left corner . I've attached the same image to another surface file (without the regrading in this one) and it works fine. why doesn't the image drape over the whole surface?
View 1 Replies
View Related
Feb 18, 2010
I have a corridor that uses the Urban Sidewalk subassembly along the streets. During my rough design phase I set the outside boulevard widths to 2.00, and create a corridor surface using the Top Links as breaklines. I then do my lot grading, using that surface as a surface pasted into my FG surface. All of my side yard swales go up to the edge of the corridor's boulevard, with the elevation set 0.20 below the corridor surface. Once all of the design is done, I go back to the corridor and change the boulevard width to 0, thus forcing those side yard swales to now go up to the back of walk.this creates a small depression where we place small drain inlets.
Herein lies my problem, when I change the boulevard width from 2 to 0, the corridor surface never changes to reflect the 0' width. It's as if the break lines that I told the surface to use from the Top links are holding fast. The ONLY way I have been able to get the surface modeled correctly is to completely delete the corridor surface and create a new one and recreate the boundary, which I then need to re-paste and move to the top of the Edits in my FG surface. Just deleting and readding the Top Links from the corridor surface definition does not solve this.
the corridor-created breaklines do not get revised when the corridor changes, and cannot be edited/deleted by the user. Perhaps I am doing, or not doing, something that is forcing these breaklines to persist..
View 4 Replies
View Related
Mar 22, 2012
I'm creating a 3d ramp and need to create one surface of the whole thing, but as its overlapping on certain areas the surface keeps attaching itself to the corridor below it and another corridor crossing over top.
how to create a smooth surface that doesnt connect to anything overlapping it?
View 2 Replies
View Related
Sep 13, 2013
It is 27 miles of waterline broken into 3 mile segments.The problem is with the profiles that have been cut. The existing ground surface has been sampled along the alignment and multiple profile view made from that alignment. When the alignment changes, the only way that the surface seems to update is to run the "profiles; create profiles from surface command again" at which point it adds a new profile into the profile views reflecting the current surface over the alignment, then the "old" profile must be deleted from the profile views. Everything is set to dynamic, yet certainly is not being very dynamic.
View 4 Replies
View Related
Jan 14, 2012
vault_4.jpgvault_3.jpgvaul_2.jpg
I am trying to create a vault of a church by autocad (foto_1) So i need to eliminate part of the surfaces i ve created using the 'extrude' command at the line drawings of arcs. How can i cut these parts (foto_2)?
I've read about a 'slice' command but when i try it i get a message ''no solid objects were selected''.
I also tried to manage it with 3dsmax but it chooses the whole polygone (foto_3). The same passes with Sketchup8.
View 9 Replies
View Related
Aug 29, 2013
I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
View 2 Replies
View Related
Nov 29, 2012
I have a stationing line. I've used the block PTTICL to make ticks. The ticks display perfectly. I'll run through a plot preview and the ticks show on the plot preview. I push plot go to the printer and the ticks are not plotted.
I've checked the layer. They are on a layer that should print.
I've checked the block. The block is created on a layer that should print.
I've run through a number of options regarding the alignment label properties and found "display" to be equal to "true."
Everything else plots just fine. Only the station label ticks refuse to plot. My project is fairly short so the work around was to put a poly line right on top of the tick mark.
AutoCAD Civil 3D 2013.
View 5 Replies
View Related
Dec 2, 2011
I often have to do storm pond surfaces that (for the purposes of planning) are flat on the bottom. These surfaces are created from a combination of survey data and grading groups and the tin of these surfaces is perfectably acceptable. However, when contours are shown, the flat bottom is shown with contours jig-jagging all over the place.
The attached image shows a comparison of the same pond. The top was created with survey data and grading groups; the bottom was created using contour data only. The generated surface on the top shows the bottom contour going in different directions and has parts where the an expected contour is missing.
How to correct/manipulate the surface to show a proper flat surface?
View 6 Replies
View Related
Oct 22, 2012
Has instances where you set your tolerance for the maximum triangle lenth to say 50m to reduce the amount of triangles along the edge that run at long distances. When I do this I end up with multiple surface holes and I'm not sure why as there are points in the area.
I thought well maybe it's because i should've reduced my max triangles first then added breaklines. Would this matter? I also thought I could add a line to the surface to fix the holes vs. deleting surface lines along the entire edge of a surface for many many miles.
View 9 Replies
View Related
Feb 21, 2013
I encounter problems to organize my work. I don't understand some actual C3D behaviors. Every time I open C3D I have :
- An empty drawing1 I always have to delete .... ???????????
- Automatic last survey working folder open. Ok, it is well.
- All the drawing templates I need, Ok . it is well.
I have to open manually my drawing / drawings. In case I have to open more than 1 file (and they have to be placed at the same folder....), C3D open all of them (regardless of whether it be neccesary....) . So I have to wait and see how flies fly ..It seems that Vault can be a solution. Basic Vault can't be used inside prospector (This is what C3D says...)
Imagine I'm working with 3 or 4 projects. Every time I have to work with one of them, have I to do a stupid work (open and set folders) that can be produce errors and problems ? I have to create a VBA dialog to make this work.....
View 9 Replies
View Related
Nov 14, 2012
I am trying to add points into a surface. I have done this before without any problems, but now I am having issues.
When I ID points which makes up the surface it gives me the correct Z level e.g. 24.5m, however when I hover over the surface it shows me the surface name and a different z level e.g. 0.65m. What is the reason for this difference in z levels? I think this may be causing the issue I am having when I add new points.
I select the surface and use the 'edit surface command' in the ribbon, choosing add point.
When I add a point at the level I require(23.89m), it puts it in a lot higher than the surrounding area, so I tried to put the point in to the lower z levels (0.4m) it puts it in a lot lower!
View 5 Replies
View Related
Dec 10, 2012
My goal is coming up with the volume bounded by the design surface and the existing surface. I don't have the design surface modeled yet.
Do i need to create alignment offsets?. Alignment 1 profile view is also attached. Then Alignment2.
What about starting with alignment1 profile view? Since I have created a polyline as the design profile ?
how do I shrink labels? Where is it in the settings ; the Align folder had been check.
View 2 Replies
View Related
Oct 2, 2012
I am issues with DEM files that I am downloading from the USGS website.I download 24k, elevation for the area I need. I then choose staged 1 second, add a surface to a blank drawing, then upload the DEM files to the surface.
The surface imports correcty, but when I try to import points taken by a surveyor on the same drawing, they plot incorrectly.The DEM surface and the points from the surveyor do not correspond. Also, the DEM surface is in meters, not feet. I have tried changing drawing settings, datum types, coordinate types, etc.
View 9 Replies
View Related
Apr 4, 2012
Is there any way to change the referenced surface on a Surface Elevation Label. I can see the surface in the properties but cannot change it.
C3D 2011
View 1 Replies
View Related
Jul 29, 2013
I have a project involving 3 programs. I am creating a planned development in 3d to be 3d printed when finished. The project is a 5 acre tract containing 8 buildings. I have built the surface in C3D and each building in Revit. The buildings are not in the same Revit file. For my solid work, I will bring the files over into 3ds Max Design to section into smaller quadrants to build in the 3d printer.
The questions:
Would it be better to import the surface into Revit to merge surface and buildings together?
Would it be better to import the buildings into C3D to merge entities?
Would it be better to bring those entities into 3ds Max and then merge them into one? Will 3ds Max Design allow me to insert entities accurately in the environment?
View 6 Replies
View Related
Sep 15, 2013
I need to create a sub-set surface from my main surface. not sure what the vernacular is for a "subset surface" in c3d but i do have a feature line that bouinds the desired area, but that is as far as i can solve.
i did try creating a new surface - pasted the main surface in the edit definition, then deleted triangles until the boundary alighned wiht my featureline. This seemed to work, but when i view the properties of the smaller subset suface, it shows a mimum and maximum elevation that is incorrect.
View 3 Replies
View Related
Mar 1, 2013
Im currently using an addon for Civil 3D called Novapoint. It allows me to create 3D models of surfaces made out of 3d faces and easily models cut and fill 3d-models for me.
The only thing i need to create a cut and fill model is one or several ground surfaces (existing ground, earth layers, rock etc. whatever i need) and a closed polyline/3Dpolyline that represents the level I want my cut and/or fill model.
I enter the spcifications I want such as; earth cut angle, rock cut angle, fill angle, select which surfaces i want to include in the model calculation and select the polyline.Novapoint then calculates the cut/fill model from the surfaces to the polyline and models the different cut/fill angles and gives me the results in a 3d-face model and a specification of the volyme of rock cut, earth cut an fill.
1. Novapoint is quite unstable and crashes alot
2. You cant create profiles out of 3d faces
3. Novapoint does not automaticly combine the start surfaces with the modeled cut/fill surface
4. A large surface made out of 3d-faces demands alot of computer power
So I want to how I do the same that Novapoint does for me in Civil 3D? (I have access to Civil 3D 2007-2013 depending on which one you're using)I know I can take the 3Dfaces i created in Novapoint and make a surface in Civil 3D with them but I want to exclude Novapoint completely.
View 9 Replies
View Related
Mar 26, 2012
all of a sudden whenever I run audit on my corridor file the surface definition becomes a snapshot. To add to the drama, the corridor surface will not paste into an empty surface. Why?
View 2 Replies
View Related
Feb 7, 2013
My problem added with pic ... I want to make volume calculate for sample road project. When I try to compute materials I cant use Corridor surface for DATUM... There is only target surface on option..
View 2 Replies
View Related
Mar 6, 2012
I am trying to visualize a road project. The problems is, whenever the corridor surface goes below the EG surface (when the road is in cut) the EG surface is the only visible surface.
I sort of need to subtract the corridor surface from the EG surface, or merge the both surfaces into one.
View 3 Replies
View Related
Sep 27, 2011
I'm using AutoCAD Map 3D 2009.
I've created a simple drawing in CAD that contains a cropped JPEG, a two toned hatched polygon in behind it two MTexts overlaying all.
I cannot view them in either normal plotting, pdf format, jpeg format and even dwf.
I've increased the ram used in the "Raster Extension Options" (2000 MB), I've set the plotting in the "Process Document" to "...In computer", I've saved it in older formats (2000/2004/2007), I've placed the drawing on both our public drives as well as the local, I've adjusted the "Raster and Shaded/Rendered Viewports" & "OLE" settings in the "Device and Document Settings" (None to Best). Not to mention the other variations in the plot menu.
I've tried everything I can think of and have read through several threads here and nothing works.
What drives me nuts about this, is that I'm able to print from a layout with no problems a 3D drawing, with 2D hatching, an extensive title block with hatching and a secondary overall viewport (minimal detail) in the main viewport area.
View 6 Replies
View Related
Apr 26, 2012
OLE objects does not plot in color. The OLE object is in a title block that its being reference to the working drawing. Is the are referencing setting we can manipulate to resolve this issue?
View 1 Replies
View Related
Nov 21, 2013
I have C3D 2010, 2011, and 2013 installed on my pc. I use the Publish command almost daily, and haven't had any serious issues with it when using 2010 or 2011. But in 2013, when I publish it just sits on the same screen and never actually publishes. I have tried turning off Publish in Background, I have checked that the printer support paths are the same as in 2010 and 2011, and I have tried Publish with different Page Setups.
View 3 Replies
View Related
Nov 6, 2013
I have a drawing which contains 17 layouts in paperspace. When I go to plot all drawings using the sheetset manager its only plots out what is in paperspace. I.e the titleblock and nothing in the viewports, i.e model space.
View 2 Replies
View Related
May 3, 2013
I was wondering if there is an easy way to trim one surface to another. Right now, I have two slopes (3:1) that are perpendicular to each other. They meet at a corner and I have extended them past each other so that I could see the intersecting edge. Now I would like to trim them to each other like you would a polyline etc... but I am not sure how to do this.
If I select surf trim, it tells me they are the wrong object type, but they are tin surfaces?
View 5 Replies
View Related
Oct 31, 2013
I have a set of drawings.
Titleblocks are drawing files with the floors xref'd in.
It's a pretty regular aggregate xref method.
I have a sheet with a roof plan.
The third floor (unique xref - attach) has vpcolours assigned to layers so that the walls show greyed out, for routing roof drains.
If I plot this sheet on it's own, the walls below show.
If I plot the whole set by shift clicking the drawings in the sheet set, and choosing publish to PDF, this drawing doesn't show. I get the roof plan without the xref'd walls below showing.
I'd like to issue one pdf file of the whole set, but this one sheet in the middle isn't showing. I don't have an adobe suite to plot the roof plan on it's own and cut it in for the wrong one because $1500.00
I'd like to be able to plot the draiwng correctly from AutoCAD.
View 1 Replies
View Related
Dec 19, 2012
I have received a ctb file from someone else and need to use it for my dwgs - but it does not appear in the plot style table roll down of the page set dialogue box? Other ctb files are visible. I have used stylesmanager to locate where to copy it in, and done so. I have tried the command CONVERTPSTYLES in case my dwg was not color style based but I get this message:
THIS COMMAND CONVERTS A COLOR DEPENDENT PLOT STYLE DRAWING TO USE NAMED PLOT STYLES. YOU SHOULD CONVERT YOUR COLOR DEPENDENT PLOT STYLES TABLES (CTB FILES) TO NAMED PLOT STYLE TABLES (STB FILE) WITH CONVERTCTB BEFORE YOU CONVERT YOUR DRAWING.
Doesn't this mean that my dwg is already a color dependent plot style dwg? I have successfully copied and used this ctb file somewhere else yesterday, and feel I am doing the exact same thing, so very frustrated and lost. I really need to get these dwgs out!
View 3 Replies
View Related
Nov 2, 2009
Today I happen to be checking in and out many drawings. All display the cogo points message at the lower left corner, and all are taking 4 minutes to check in. UNREASONABLE! Especially when I have five minutes of work to do in each drawing.
View 9 Replies
View Related
