I'm creating a 3d ramp and need to create one surface of the whole thing, but as its overlapping on certain areas the surface keeps attaching itself to the corridor below it and another corridor crossing over top.
how to create a smooth surface that doesnt connect to anything overlapping it?
Is it possible to merge two or more adjascent / overlapping surfaces into a single surface?Is it possible to "Delete" multiple surfaces in one go?
View 2 Replies View RelatedI'm trying to create flexible model of a penstock with different ground surface elevation scenario.
In case if both top points of trench below or above EG, there will be cut/fill case to EG.
how to connect P1'/P2' and AX1/AX2 via EG? Basic link wouldn't work because it will be just a straight line.
Been chatting with an architect in my office, and he was asking me if we could make our TIN surfaces smooth. I cannot find a way, would it take a 3rd party program? He wants it like the image i attached. How to achieve this with a TIN surface?
View 9 Replies View RelatedWhen I use the blend tool for a smooth blend, the blends comes out jagged and horrible, as if it is doing a step blend rather than a smooth blend. I have used the tool before by either using the shortcut (Alt+Ctrl+B) or using it via the Object>Blend pathway and it worked out fine, but now Illustrator doesn't want to create a smooth blend.
What I'm trying to say is; is there an option that is causing this to happen that I may have accidently turned on, or has my copy of Illustrator gone into stupidity mode and I need to reinstall it?
I've attached pictures of what I mean with the settings I'm using and outputs. I hope your collective minds can smack this one in the face. I'm sure I'm doing something ridiculously simple to cause this.
I'm using CS5 Illustrator and my relevant PC hardware is listed below. - Intel i5-2500 3.30Ghz
- nVidia GeForce GTX 560
i have been a long user of romcat... but would like to use the new corel connect. i use the folders selected to my HD folder that has all my cdr files (20yrs worth from ver 1). when i type in a search word that is in 100's of my cdr files keywords... connect doesnt display them. In romcat it does display them, even older files, with the same key word. connect only shows cdr files that have in its file name part of the search word, but seems to ignore the key words in the files.
I have all my job files with important key words within them, but the actual file names are simple job numbered names. i noticed on searches from X5 content on dvd, the files also are just numbers, but the search finds key words.
Am I the only one who has edited a stroke with the stroke width tool, then outlined the stroke only to find a countless number of points and noticeably unsmooth edges? Is there a setting or certain way to ensure that the stroke width tool won't corrupt the smoothness of my shapes? The stroke width tool is the most handy new feature I can imagine, but this problem makes it almost entirely useless, unless designing something where precision and smoothness are not important.
View 6 Replies View RelatedIm currently using an addon for Civil 3D called Novapoint. It allows me to create 3D models of surfaces made out of 3d faces and easily models cut and fill 3d-models for me.
The only thing i need to create a cut and fill model is one or several ground surfaces (existing ground, earth layers, rock etc. whatever i need) and a closed polyline/3Dpolyline that represents the level I want my cut and/or fill model.
I enter the spcifications I want such as; earth cut angle, rock cut angle, fill angle, select which surfaces i want to include in the model calculation and select the polyline.Novapoint then calculates the cut/fill model from the surfaces to the polyline and models the different cut/fill angles and gives me the results in a 3d-face model and a specification of the volyme of rock cut, earth cut an fill.
1. Novapoint is quite unstable and crashes alot
2. You cant create profiles out of 3d faces
3. Novapoint does not automaticly combine the start surfaces with the modeled cut/fill surface
4. A large surface made out of 3d-faces demands alot of computer power
So I want to how I do the same that Novapoint does for me in Civil 3D? (I have access to Civil 3D 2007-2013 depending on which one you're using)I know I can take the 3Dfaces i created in Novapoint and make a surface in Civil 3D with them but I want to exclude Novapoint completely.
I've just installed Civil3D, 64-bit on windows 7(running on bootcamp) and am trying to insert a georeferenced raster image but have encountered some issues.
1. "Home tab>>Data panel>>>insert An Image" - The data panel is missing and it's also not found in "customize palettes"
2. Trying the data connect route does not work either: Display manager>>>Data>>>Connect To Data - There is no 'Data' option and I cannot connect to Data.
I have a project in vault (v2011), with surfaces, etc. data referenced into a sheet (neglect workflow for the moment) that displays correctly, print preview's correctly, but when plotted does not show the surface contours of any surface. Additionally, some contour labels and spot labels display CORRECTLY while some spot labels are ??? and some contour labels are not visible.
By the way, the surfaces are in different source files.
I've brought a PNG image into a Civil 3D surface model and attempted to drape it on the surface. The image is scaled to the topography when it's first brought in, but when it's draped on the surface it gets placed very small in the bottom left corner . I've attached the same image to another surface file (without the regrading in this one) and it works fine. why doesn't the image drape over the whole surface?
View 1 Replies View RelatedI have a corridor that uses the Urban Sidewalk subassembly along the streets. During my rough design phase I set the outside boulevard widths to 2.00, and create a corridor surface using the Top Links as breaklines. I then do my lot grading, using that surface as a surface pasted into my FG surface. All of my side yard swales go up to the edge of the corridor's boulevard, with the elevation set 0.20 below the corridor surface. Once all of the design is done, I go back to the corridor and change the boulevard width to 0, thus forcing those side yard swales to now go up to the back of walk.this creates a small depression where we place small drain inlets.
Herein lies my problem, when I change the boulevard width from 2 to 0, the corridor surface never changes to reflect the 0' width. It's as if the break lines that I told the surface to use from the Top links are holding fast. The ONLY way I have been able to get the surface modeled correctly is to completely delete the corridor surface and create a new one and recreate the boundary, which I then need to re-paste and move to the top of the Edits in my FG surface. Just deleting and readding the Top Links from the corridor surface definition does not solve this.
the corridor-created breaklines do not get revised when the corridor changes, and cannot be edited/deleted by the user. Perhaps I am doing, or not doing, something that is forcing these breaklines to persist..
It is 27 miles of waterline broken into 3 mile segments.The problem is with the profiles that have been cut. The existing ground surface has been sampled along the alignment and multiple profile view made from that alignment. When the alignment changes, the only way that the surface seems to update is to run the "profiles; create profiles from surface command again" at which point it adds a new profile into the profile views reflecting the current surface over the alignment, then the "old" profile must be deleted from the profile views. Everything is set to dynamic, yet certainly is not being very dynamic.
View 4 Replies View RelatedCan a surface be created from a UCS that is something other than the WCS? For example, can you create a surface for a vertical wall, or a battered almost vertical wall?
View 2 Replies View RelatedI work in both Microstation(PowerCivil) and Autodesk(C3d 2010) platforms, unfortunately not very proficient in either. We use both due to project requirements. I have no say in the format what-so-ever. Now to the point.. I am working on a project thats survey is a 2d .dgn however I am to create a model from this information (which happens to be just text spot elevations no intelligence attached) and supply it in C3d..Is this Possible ?? Or would it be easier to just do it in PowerCivil (I have made surfaces with 2d objects before with) and convert to .dwg upon completion ????
View 8 Replies View RelatedAny experience with the Tin Surface CreatebyCropping Function.
The specific stumbling block I have come across is the best way to deal with the database that is required to export the new cropped surface to as it has to be different from the current drawing. I don't actually need the cropped surface to be saved but need to be able to adjust elevations and extract the tin from it. The tin would then be used to generate a pregrade surface in the base drawing. Previously I had done this with non-destructive boundaries but I find the cropped surface to be more accurate.
Civil 3D 2013 - Windows 7(64 bit)
I have two separate graded levees in my drawing. One has created a surface just fine, the other absolutely refuses to generate a surface. I've deleted the grading even the feature lines and re-did them. In my grading group I have automatic surface creation checked and the volume base surface checked. I show the surface in the prospector but there is nothing there. The one levee will show contour styles but this one ZIP!
View 2 Replies View RelatedI'm creating a containment dike around and island. I want the berm to tie down to the existing surface, then offset from that tie point 21' to the surface again. I can do an offset from Baseline, or a tie to an elevation in a profile. What I can't do is make the offset 21' from the tie location over an additional 21' to another tie point on a surface.
View 4 Replies View RelatedI am working in Civils 3D 2014 and I have a survey with points already on the correct elevation layer, I have tried creating a surface from this but it does not show up.
My process:
- I create a new drawing and insert a block (my topo survey) and click explode when I do this
- I create the surface by TIN and make sure I have the correct layer for the points that I am selecting
- Click ok
- Then go into that surface and turn on all layers and refresh - still nothing
- I also made sure that my surface style was 1m contours so I would definately see this.
I have created a contour layer in MAP and need to bring the data into Civil (to create and EGL surface) which I usually I do via an alter properties query.
There is the Create Surface from GIS data in 2014 but this requires shp files so the two questions I have are:
Can the contour layer be output as shp files (and if so how)?
If yes, is this easier/more efficient than my current workflow?
(No connection with Autodesk other than using the products in the real world)
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I am start work in civil 3d 2009, I have a project started in LDD2009 and am trying to migrate to civil 3d 2009. I have imported the points, tin, and contours but cannot figure how to create an actual EG surface. Can some on etell me how to create and actual EG surface using tthe tin and points.
View 6 Replies View RelatedI'm trying to replicate a dump surface from a cad file, but this one is rather different from what i'm used to (more simple and poligonal).
This one is curved and the top of the platform has inclinations has the picture shows.
I'm having trouble on finding the best way to aproach this dump surface. I tried to start from point 2 with the curved feature line and grade back 2% till EG and then grade forward 10% till it reaches point 3 at elevation (900) , but when i grade forward the sides obviosly dont hit my EG.
I just upgraded to Civil3D 2014 and Windows 8. When I create a TIN surface using a DEM file no contour lines are displayed. Points are processed and triangles are created and can be displayed but no contour lines. Contour line layers are set to display in the style file.
View 9 Replies View RelatedI use RocTek for cut/fil calculations, but the program is old and basic, I'm trying to transition to Civil 3D 2012 right now. Typically I create "no work zones" around my building footprints, so that I can do a more detailed take-off in those areas for over-excavations and that sort of thing. Right now I'm using Civil 3D to create an existing surface, a proposed surface, and then a volume from between the two. I thought if I just traced my proposed contours over the existing within the building footprint that I would get what I was looking for. However, analysis of the cut/fill volume shows that there are still some changes being made around the edges of the building.
Is there a specific way to make a proposed surface, but leave parts of the existing surface untouched?
See attached photo. The upper middle portion of the screen is where the building is (forgot to turn on layer).
I was wondering is it possible to create a surface from a Revit model ? There are retaining walls etc in the revit model !
View 1 Replies View RelatedI would like to create surface from contours and extract points (with value) from on it. I had contours in my drawing; each major and minor contours are single polyline with elevation (Z value).
If I create surface form CONTOUR, some polylines (major or minor) are not included in to surface. After the creation of surface, I tried to erase the existing contour lines (Polyline) from drawing but the surface will be disappearing.
If I create the surface from ''DRAWING OBJECTS'', I'm not able to select the polylines (attachment 01) .
Attached is a dwg file that refuses to complete the surface triangulation. Can some try this? The maximum triangle length is set to off. I'm out of guesses. If I move the furthest point around it will complete the surface but just not in it's current location. Point number 69
View 9 Replies View RelatedI recently upgraded to Civil 3D 2013 and now all of my "Create Surface" commands do not work. I get the message " _AeccCreateSurfaceGridFromDEM Unknown command "AECCCREATESURFACEGRIDFROMDEM".
View 2 Replies View RelatedIf i have a GPS Survey which i can create a surface from and 2D mapping from GIS records, is there any way to turn the 2D mapping into 3D using the surface data?
View 1 Replies View RelatedIs there a way to remove the 'parting' line to create a smooth surface?
Inventor 2013, SP2
Dell Precision M6600
Windows 7 Professional - 64Bit
32 GB Ram
Nvidia Quadro 3000M
The command to JOIN two overlapping anchor points as a SMOOTH join is not working (at least, on Mac).
"The join option only results in a corner join regardless of whether you select anchor points to join or the entire path. However, for overlapping anchor points, if you want the option to select a smooth or corner join, then use Ctrl+Shift+Alt+J (Windows) or Cmd+Shift+Option+J (Mac OS)."