AutoCad :: CTB Doesn't Show In Plot Styletable Roll Down Of Page Set Dialog Box?
Dec 19, 2012
I have received a ctb file from someone else and need to use it for my dwgs - but it does not appear in the plot style table roll down of the page set dialogue box? Other ctb files are visible. I have used stylesmanager to locate where to copy it in, and done so. I have tried the command CONVERTPSTYLES in case my dwg was not color style based but I get this message:
THIS COMMAND CONVERTS A COLOR DEPENDENT PLOT STYLE DRAWING TO USE NAMED PLOT STYLES. YOU SHOULD CONVERT YOUR COLOR DEPENDENT PLOT STYLES TABLES (CTB FILES) TO NAMED PLOT STYLE TABLES (STB FILE) WITH CONVERTCTB BEFORE YOU CONVERT YOUR DRAWING.
Doesn't this mean that my dwg is already a color dependent plot style dwg? I have successfully copied and used this ctb file somewhere else yesterday, and feel I am doing the exact same thing, so very frustrated and lost. I really need to get these dwgs out!
View 3 Replies
ADVERTISEMENT
Nov 23, 2011
Is it possible to purge page setups from the plot dialog?
ACA2011
Win7-64
View 4 Replies
View Related
Sep 18, 2012
my cs6 does not show my epson scanner in the dialog box as photoshop 7 died.
View 1 Replies
View Related
Jan 22, 2013
I have a drawing that I created with acad 2010 that has a pdf xref attached. I just updated to 2013. And now when I go to plot the drawing my xref shows up in preview but doesn't show up on the plot.
I can go back to my 2010 version, and it plots fine. What gives?
View 0 Replies
View Related
Nov 16, 2012
I just tried to open a CorelDRAW document on my other computer where I'm obviously missing one of the document's fonts.
Problem:
The CorelDRAW font substitution dialog does not list the missing fonts:
Thus, it's impossible to install them to get the document working as expected.x.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
View 7 Replies
View Related
Dec 12, 2013
I have several drawings and which have different scales (1:50, 1:20 and 1:10) all in one dwg file. I made different .ctb files for each of them to make easier to interchange drawings between two different scales. But now I'm plotting each of them onto seperated rolls. I wonder if there is a way to plot all of them onto just one roll?
View 9 Replies
View Related
Feb 18, 2013
We have a T790 44in, with 42" roll paper installed.
The thing I'm having trouble with, is getting it to act like it has roll paper. I can set custom paper sizes in the printer drives all day (such as 42" x 42") but this is only half way accurate, and can waste a lot of paper.
Is there a particular way to set the printer to use the roll paper?
View 7 Replies
View Related
Sep 11, 2012
Where else do they keep this setting? I only have found it in Active Layout in extended dada
(entget (vlax-vla-object->ename(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object)))) '("*"))
The last pice of extended data is:
("PLOTTRANSPARENCY" (1071 . 0))
When i change it to 1
(setq layout(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object))))
(vla-getXdata layout "PLOTTRANSPARENCY" 'type 'data)
(vlax-safearray-fill data '("PLOTTRANSPARENCY" 1))
(vla-setXdata layout type data)
it stays there (extended data), but the setting in Plot dialog box doesn't change!!! And it still prints no transparency.
It takes to save the drawing and reopen it again to see the change.
The command -PLOT does not have this setting as well, so my options back to VBA or Lisp, but HOW?
View 9 Replies
View Related
Aug 29, 2013
I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
View 2 Replies
View Related
May 3, 2012
I have moved from VBA to .NET. Is there a way to access the "Number of copies" value as set in the Plot dialog? I know this value always gets re-set to 1, but I want to know if it is possible to get the value set by the user *after* clicking OK in the Plot dialog. "Number of Copies" does not seem to be exposed as part of the "Layout" object in .NET (nor was it in VBA). Is it available anywhere else? Is this stored in the registry, and if so where is it located?
View 4 Replies
View Related
Oct 11, 2011
I am using AutoCAD 2012 with Acrobat Pro 9. When I output via the plot dialog in CAD to pdf print the text looks different then when I use the output toolbar export to pdf. Both files plot the same on paper, but when I look at the output tool pdf file zoomed out, the text looks unclear with some characters looking grey vs. black. Is there a setting that changes this so the text can be more readable even when zoomed out?
View 0 Replies
View Related
Jan 7, 2013
the ctb files do not appear in the drop down list in the plot dialog box. I have checked the files and are located in the correct directory. Also have verified that the files are being pointed to in the options dialog box.
View 2 Replies
View Related
Oct 24, 2012
using acad 2010.
i want to remove all the printers i don't use from the plot > printerlist (also system printers). how can i do it?
View 2 Replies
View Related
Oct 28, 2013
Is it possible to show hatch dialog box using .NET?
I have found one old issue (link) but it does not work with AutoCAD 2014.
View 2 Replies
View Related
Nov 14, 2011
I have recently started working on a project in metric and have a weird (to me) issue when I try to plot. There are literally hundreds, of scale options in the Scale popup, most of which make no sense to me. I know that I need 1:25, or 1:100 to fit on the page I am printing to. How do I remove or filter out all of the others such as 1:100 3_1_1_1_1_1? I don't even know what that notation means.
View 9 Replies
View Related
Nov 16, 2011
When I click somewhere in the drawing I would like to show a dialog form next to my cursor.
surely cursor.position is not right. What is the right location for this form?
View 5 Replies
View Related
Jun 27, 2011
I'm trying to plot a set of drawings that need to be set at 1:1. Every time I pick Custom or 1:1 and set it to 1mm = 1unit, AutoCAD immediately switches it to whatever 1:1_6 is, leaving me with a bunch of empty space around all my viewports.
I'm fairly new at using paper space, and I've never used a plot scale that have underscores in them, so I don't even know what they're representing.
View 9 Replies
View Related
Sep 20, 2012
I have been using until saturday Windows Vista and Autocad 2008, with out any problem, at least that windows vista was slowly.
So I decide to upgrade my notebook and I add windows 7 - 64 bit and change my autocad to a 2010 version for this windows 7 as well.
The acrobat is the 8 version.
The problem is the following:
I was able to work normally with this soft, but when I need to plot in PDF a drawing bigger than A0 page, it does not plot. If I add an A0 it works fine. Then I went to properties, change the page to a PostScript, and change paper size to 2100 mm in height and width, but anyway It still dont work.
Is there anything I must set before ploting a bigger size page, with the new Autocad 2010 or with windows 7??
View 3 Replies
View Related
Mar 19, 2013
I am difficulty getting the options dialog box to open (under the file menu "red A" dropdown list, options button). When I click on it, all of the buttons on top go gray and nothing appears. When I click on the black workspace, I get a compluter bell sound.
What I've tried to do to solve the problem is restart the computer and shutdown the computer.
View 2 Replies
View Related
Feb 22, 2012
Among about a dozen ACAD users in my office, one is missing the "Arch D (landscape)" paper size that accompanies the PC3 file we generally use. I have checked that the roll size and other settings in the machine in question and all of that looks good. I don't want to edit this PC3 as it works for everyone else and don't want to create a new PC3 for this one user.
View 2 Replies
View Related
Nov 6, 2013
All of the sudden I cant get to my bolted connection dialog box.
1. The command runs and the prompts at the lower part of the screen show.
2. Have loaded and unloaded / restarted via add ins.
3. Have looked behind all windows ect on both of my 2 screens
View 3 Replies
View Related
Jan 27, 2012
My symbols dialog box show letters, I need it to show symbols. How to I fit this?
View 2 Replies
View Related
Jul 11, 2013
I have created a bunch of Page Setups (for both Paper and PDF) that work great when plotting from the plot menu. Lately, I've convinced my people to start using the sheet set manager and the publish command. However, on some computers, (not mine) plotting (to PDF) from the Publish dialog box outputs a file that seems to ignore the page setup. Using the very same Page Setup, the file comes out perfectly when plotting from the regular Plot menu. I don't understand how:
1- I get the same result with both methods on my computer (the one used to create all those page setups);
2- I get page setup to apply perfectly on my computer;
3- I get the expected result on the problematic computers when using Plot;
4- But I get different results on the problematic computer when using Publish.
*Note: In the publish dialog box, I use "Publish to: Plotter named in page setup" and then I select the wanted page setup for all my selected layouts in the list. My page setups are using "DWG to PDF.pc3", so the "plotter named in page setup" in all cases should be "DWG to PDF".
I've been doing tests with PDF files set on A1 format (841mmX594mm) and the output is perfect on my computer. Then on another computer, strangely, I get a PDF with these dimensions: 863.6mmX558.8mm (34"x22"). On the second computer, doing the very same steps, I get 431.8mmX279.4mm (17"x11"). Three computers, three different outputs with three different values. One works, two miss. I'm stoked.
Keep in mind that all three computers output perfect files when using the standard plotting menu (using the same page setups) so I doubt the page setups are incorrect. Does the Publish command deal differently with page setups than the plot command ? I would have assumed that both commands would react the same. I 'd like my team to be able to batch plot like I can on my computer.
View 3 Replies
View Related
Aug 27, 2011
I've got a very long narrow site where more of it would be better shown and printed on a vertical page. However all the default and custom viewports are designed specifically for horizontal pages. How can a page be rotated to be plotted vertically?
View 4 Replies
View Related
Oct 18, 2012
Now, i have some problem about plot many page that contain in 1 file same this pic >>
[URL]........
I have many files and i want to save time to plot (=o=!!).
View 4 Replies
View Related
Nov 6, 2013
This problem just started when I upgraded to 2014. When I try to set up layer filters the Layer filters properties dialog box does not show. I'm guessing the function is working its is just that the dialog box is poping up somewhere out of view of the monitors, forgot to mention it is a 2 monitor set up.
View 2 Replies
View Related
Dec 12, 2012
I've been attempting to export geometry (which I believe is in the proper format) out of AutoCAD 2013 to the .iges (or .igs) solid body model format with no luck. I found the instructions in the AutoCAD documentation but when I try and execute, no luck. I do get the mandatory "1 object found that "fits the file type format requirements" dialogue so again I'm pretty sure that I'm doing things correctly.
Do I need a special plug-in? Here is the info on this type of export: Click Output tabSend panelExport.In the IGES Export Data dialog box, in the Files of type box, select IGES (*.igs, *.iges).In the File Name box, specify the name of the IGES file.Click Save.Select the objects to export and press ENTER to begin the export process.When export is finished, a notification bubble is displayed.
I don't even get the IGES Export Data dialog box to show up..
View 3 Replies
View Related
Dec 10, 2007
How to get the AEC Modify Tools to show up on my pop-up dialog boxes? Is there something I need to intall and/or configure?
View 6 Replies
View Related
May 27, 2011
I have a list of drawings which i want to batch plot using dwg to png plotter. I want the page setup file to use sun high res, plot scale fit to paper, plot area extents, plot offset center the plot for the model space
When in batch plot, the page setup shows default, however this is not my pagesetup settings as it shows default none, how do i make it see the page setup i want?
View 1 Replies
View Related
Sep 4, 2013
I am trying to plot somelthing with a transparent hatch. I set the hatch to transparent, shows up fine in model space. I go to plot (either to paper or pdf doesn't matter) in the plot setting I check "Plot Transparency" print preview shows everything fine. When I print I get a blank page.
View 5 Replies
View Related
Mar 18, 2011
I'm new to AutoCAD Architecture and I need to plot to pdf but can't find "legal" 8 1/2X14 size option.
View 1 Replies
View Related
