AutoCAD Inventor :: Change Text Height Of Drawing View Label Through VBA?
Jan 28, 2013
Is it possible to change the text height of a drawing view label through VBA?
I have tried to change it by creating a new text style manually with the text height I require and then through VBA set the view label to use that style.
The View label takes on the new style but does not change the text height.
I have tried to use 'StyleOverride FontSize=' but I have text that is multi lined and using this command converts all my text onto one line.
Is it possible to change the text height of a drawing view label through VBA?
Below is my code so far,
Sub HoleDetailSheetLabels()
' Declare the Application object
Dim oApp As Inventor.Application
' Obtain the Inventor Application object.
' This assumes Inventor is already running.
'Set oApp = GetObject(, "Inventor.Application")
[code]...
View 3 Replies
ADVERTISEMENT
Sep 18, 2012
I am trying to rewrite Curtis Waguespack's ilogic code to modify drawing view labels from this post http: [URL]...
The completed label should appear like this
<Description> - Mk <Part Number>
Est Unit Mass = X kg
(Scale 1:1)
At this point I have 2 problems
1. I want to add the physical mass to the second line and would prefer to use the calculated physcial property rather than the a custom iproperty. If editing the view label, it would the property access under physcial properties.
2. I want to rewrite the code so it is selective or per view - in otherwords, I only want it to modify a single view I select once the code is run. At this point I know I need to remove the For loop but I dont have a clue as to how to make it selective.
'start of ilogic codeDim oDoc As DrawingDocument: oDoc = ThisDoc.DocumentoModel = ThisDoc.ModelDocumentDim oSheets As SheetsDim oSheet As SheetDim oViews As DrawingViewsDim oView As DrawingViewoSheets = oDoc.SheetsFor Each oSheet In oSheetsoViews = oSheet.DrawingViews For Each oView In oViews oView.ShowLabel = True
[Code] ......
View 5 Replies
View Related
Nov 25, 2008
Each time when I place a part in base view, have to follow few steps; go through view label, format Text, than choose type option - [Properties-Model] and its property - [Part Number], than placing dimensions. it takes long time and very repetitive, especially, when placing a hundreds of parts and I was wondering if there is an option, to set up view label; [Properties - Model ]& [Part number], as a DEFAULT. So, each time placing a part, in base view it will come up with correct label. Also, overall dimensions, can it be retrieve using parameters of the part?
View 4 Replies
View Related
Nov 21, 2013
I have often problem with drawing view labels. When model is changed and I switch to the drawing then the label is moved to an random position. There is possible to little move with view, or edit label text or switch off/on label and label move back to correct position. This is very unpleasant when there s more views in drawing, is necessary to correct each label.
This happen in Inv2013 and also in Inv2014.
Is not there an possibity to minimize this?
Enclosed is example video.
View 3 Replies
View Related
Nov 19, 2013
I have successfully been able to rotate the drawing view. rotating the view label.
View 1 Replies
View Related
Sep 16, 2013
We put several parts on a single drawing sheet and ,to include the part number in the drawing view label, we must edit each view label and change the type to Properties_Model and the Property to Part Number. Is there a way to set the default of a drawing view label to include the Part Number? I tried modifying the styles to include <PART NUMBER> but it the text "<PART NUMBER>" came in instead of the value. To get the value, I had to edit the view label and hit the X with a down arrow to get the part number to show up, which is not much different than having to edit the label and change type and property. I'm looking to avoid all the view label editing as much as possible.
View 9 Replies
View Related
Apr 17, 2012
what i am trying to do is create an iLogic rule that if your drawing view scale is set to the following ...
1:1, 1:2, 1:4, 1:8, 1:12, 1:!6, 1:24, 1:32, 1:48, etc. on the view label for that view it will diplay ...
SCALE: 1/2" = 1'-0"
and so on for the rest for the standard scale factors.
i know it will be some sort of a loop and it needs to check all views when ran for any changes.
i have never done any coding for the drawing side of inventor yet only model coding
View 6 Replies
View Related
Jul 2, 2013
How do i increase the dimension text height in my drawing.When i go thro the styles and standards editor and increase the text height all the text in my sheet border also increases.Surely there must be a way to isolate the dimension text from the sheet text.
View 2 Replies
View Related
Jul 12, 2013
I mean the dimensions in sketches in a model part, not the drawing dimensions which are controlled by styles .
View 1 Replies
View Related
Apr 18, 2012
Is there a way that we can set the view label in the style library to show custom/user Properties?
We have set our iam/ipt templates to have some custom properties which we wish to display in the view label when the view is created however there this no way to add these properties to the label.
I find this a little strange as you can add these user Properties to the parts list in the style library? (I've added some screen caps to show what I am talking about)
View 8 Replies
View Related
Jul 19, 2013
I have slope % angles labeled on a plan, but they are too large. They are 1/8" tall, and I need them to be 3/32" tall. I have checked the style (ROMANS) to be sure the text height is set to 0", and it is. I've also ensured that these labels are on this label style.
Check the screenshot. I added 2 screenshots with a huge difference in font size just to be sure my point gets across. And, I have hit APPLY and closed the window just to be sure. You will see up top, I have it set to 3/32". Actually the text isn't showing right, it is still stuck on 1/8". But, regardless, you can see in the lower screenshot where I have changed it to 3", but the text has not changed.
As a side note, the text on the slope labels should match the height of the contour labels you can see in the screenshots.
View 4 Replies
View Related
Jul 16, 2013
How can i remove the scale that is automatically added to the label text of a projected or auxiliary view? The label text style governs only the font etc.
View 1 Replies
View Related
Sep 25, 2012
Autodesk 2013 Inventor Professional.
1. When in style and Standard editor with default standard selected under Standard I am trying to display mass properties in my view label.Select View Preferences tab. View type Base. Next to Display select Edit View Label.When Format Text box pops up in the selection for text type I have two options.
a. Properties - Model
b. View Label Properties
2. Inside an IDW file right click on view and select edit view.When Drawing View box pops up there is the option to access Edit View Label next to View Identifier.When Format Text box pops up in the selection for text type at this point there are seven options.
a. Properties - Model
b. Properties - Drawing
c. Drawing Properties
d. Sheet Properties
e. Physical Properties - Model
f. View Label Properties
g. Sheet Metal Properties
Questions 1. Why are ther only two options in S&S Editor?
2. Can I add more options to S&S Editor?
I would like to add mass to my lablel inside certain templates and have it show when I display a views Base view label. Not ot have to maunually add it each time it is displayed.
View 5 Replies
View Related
Aug 24, 2011
We are sometimes faced with the problem that we would like change the coordinate system of the model and have the drawing update it with the new orientation of the part without the need to place every annotation again. This is mostly for legacy parts and assemblies which are not modeled correct according to the coordinate system of the machine.
The following sample code does not work, is this by design or is there an error in the code?
Public Sub RotateFirstView() Dim oDrawDoc As DrawingDocument Set oDrawDoc = ThisApplication.ActiveDocument Dim oDrawView As DrawingView Set oDrawView = oDrawDoc.Sheets(1).DrawingViews(1) Dim oCamera As Camera Set oCamera = oDrawView.Camera Debug.Print oCamera.ViewOrientationType = kFrontViewOrientation oCamera.ViewOrientationType = kIsoBottomLeftViewOrientation oCamera.ApplyEnd Sub
Inventor Professional 2012 SP1 (25 seats with subscription)
Windows 7 64 bit
Lenovo D20, 12 GB RAM, Intel Xeon X5687 3.6 GHz, SSD
Quadro 4000, driver 8.17.12.9573, dual monitors
SpacePilot, driver version 6.15.3 Firmware 3.12
View 4 Replies
View Related
Jul 22, 2013
I am trying to piece together some code for an ilogic rule. This rule should look for a drawing view that is a flat pattern, if it finds one it should change the object layer to our "CNC" layer.
View 3 Replies
View Related
Apr 23, 2013
How can I get/edit the properties (height,..) of a drawing view created with 'viewsection' command?
View 2 Replies
View Related
Sep 6, 2013
i want to get all text font , text height and text widths on the drawing
Dim ListFont As New List(Of String)
For Each TextStyle As AcadTextStyle In ThisDrawing.TextStyles
ListFont.Add(TextStyle.fontFile)
Next
i used those code can get all text font on the drawing...but i only want to get text font which were used.and i dont know how to get the text height and widths on the drawing.
View 2 Replies
View Related
Aug 20, 2009
I have recently upgraded from LT06 to LT09.Why am I having trouble changing the text height on my dimension? I used to be able to double click on a specific dimension and change the text height to anything I wanted and than using the "match properties" icon change all the others.
View 9 Replies
View Related
Apr 19, 2013
My text style height is set to 1/8, however my leader text height is 3/16. How do I change the leader text height? T
View 6 Replies
View Related
Jul 19, 2012
For starters, I am using AutoCAD 2013.
I am having trouble with changing the text height of attributes in a block. I know that I can normally use BATTMAN and ATTSYNC to change the text height, but those are not working in my case.
I am using a point parameter and STRETCH action to enable my attributes to be moved, while the main object stays in place. When the attributes are not tied to the point parameter and I use BATTMAN in the block editor, the block will insert with any changes to attribute text height. When they are tied to the parameter and I use BATTMAN in the block editor, the block will insert with the attributes at the text height that they were created at. The only way I can change the text height is to use BATTMAN in model space.
I can work with this, but it would be easier to use BATTMAN in the block editor since my attributes are aligned vertically and changing the text size ruins the spacing between them. It would be much easier to both change the text size and respace in the block editor.
View 3 Replies
View Related
Mar 15, 2013
Which settings or where do I go to set my drawing Style, Text height and line space factor on all my drawings in one shot. It is frustrating going through many drawings changing it.
View 9 Replies
View Related
Sep 13, 2013
I am having problems with changing the height of the dimension text. I have tried going into the style editor and changing the text height in there and then saving it. The number for the height that I changed stays saved however the actual text height on the drawing does not, not even after I tell it to update.
View 3 Replies
View Related
Jan 8, 2014
In Inventor 2013 it was easily to switch in a drawing view between different iPart members. Through Edit view => Tab Model State and then it was possible to switch between different iPart members. So it was easy to make a copy in the Vault from only the dwg (from a iPart member) and then change the iPart member. Now in Inventor 2014 it is not possible anymore.
View 1 Replies
View Related
Nov 2, 2012
I was looking to change the fonts in a drawing for the Dimensions and Symbols that might have been inserted in the Dimension text entries.
This can be done manually bu editing the dimentions text after placemement, but I was ooking to set this as a default.. I cannot see where exactly this is controlled in the Styles Manager - I am only able to change the Dimension text font but the diameter symbol font is always on AIGDT.
I was therefore looking for an iLogicvb code that could do the trick, but I am not able to even change the dimension fonts... The code runs with no errors but nothing gets updated in the drawing...
Dim oDoc As DrawingDocument
oDoc = ThisApplication.ActiveDocument
Dim oSheet As Sheet
oSheet = oDoc.ActiveSheet
[Code]....
InventorVb.DocumentUpdate()
View 3 Replies
View Related
Sep 11, 2013
When I use a layout size such as A3 in paper space, the section view label text size is the same as it is in model space (when both annotative scales are the same). However, when I choose 11x17 as a layout size, the section view label text size is exetremly small.
View 2 Replies
View Related
Apr 11, 2013
I am trying to scale down my label text insdie of my viewport. Its about twice the size that i would like.I tried to use the scale command but nothing happens.
View 3 Replies
View Related
Sep 20, 2013
Every time i made dwg's i have to create all ort. views but i also need place label for each view. Is it possible with rule to pick view and then choose from list which view label it is. For ex. plan,side lt, side rt isometric etc..
View 2 Replies
View Related
Apr 22, 2012
I'm attempting to create a profile view and then modify the label by overriding the text components. Unfortunately the profile view bands don't populate the labels until after my command is complete making it not possible to modify them in one command. Is there a way to update the band to have it show the labels?
Civil 3D 2013
View 3 Replies
View Related
Jun 21, 2013
Question regarding view labels in drawings.
I want to change the appearance of the view label to look like attached snap shot. Is this possible? I have looked through the inventor settings but cant find any options.
As a possible solution I can always create intelligent symbols which update with the drawing (like the standard view labels) but before I begin creating these I wanted to check if there was any other way?
View 3 Replies
View Related
Dec 5, 2013
I found some code to add labels such as "Top View" "Left" view etc. to view labels, but it's not quite what I'm looking for. I'm OK with the default "View 1" and "Scale 1/4" that comes up on the multiview but I want the view label to say something like "Flat Pattern" and "Scale 1/4" when I do a flat pattern and same for ISO. How to accomplish that with iLogic?
View 1 Replies
View Related
Mar 21, 2012
I'm noticing that on some of my drawings that the view labels are not aligning correctly to the respective views. I have view labels set by the drawing styles to appear at the bottom center of the view by default.
The problem occurs when I go to move the view to a different area on the drawing. The view label ends up on an obscure part for the drawing. When I realign them manually, save, close and reload the drawing, the view labels still appear on obscure parts of the drawing and need to be realigned again. Only some views are doing this and I'm not sure what is causing this. It happens with (but not limited to) base, detail and section views.
FYI, I'm using Inventor Pro 2012 SP1 build 190 64-bit. I'm working from Inventor DWG (not IDW) files.
View 1 Replies
View Related
