AutoCAD Inventor :: Change Defaults For Label Text
Jul 16, 2013How can i remove the scale that is automatically added to the label text of a projected or auxiliary view? The label text style governs only the font etc.
View 1 Replies
ADVERTISEMENT
AutoCAD Inventor :: ILogic Code To Change View Label Text
Sep 18, 2012I am trying to rewrite Curtis Waguespack's ilogic code to modify drawing view labels from this post http: [URL]...
The completed label should appear like this
<Description> - Mk <Part Number>
Est Unit Mass = X kg
(Scale 1:1)
At this point I have 2 problems
1. I want to add the physical mass to the second line and would prefer to use the calculated physcial property rather than the a custom iproperty. If editing the view label, it would the property access under physcial properties.
2. I want to rewrite the code so it is selective or per view - in otherwords, I only want it to modify a single view I select once the code is run. At this point I know I need to remove the For loop but I dont have a clue as to how to make it selective.
'start of ilogic codeDim oDoc As DrawingDocument: oDoc = ThisDoc.DocumentoModel = ThisDoc.ModelDocumentDim oSheets As SheetsDim oSheet As SheetDim oViews As DrawingViewsDim oView As DrawingViewoSheets = oDoc.SheetsFor Each oSheet In oSheetsoViews = oSheet.DrawingViews For Each oView In oViews oView.ShowLabel = True
[Code] ......
AutoCAD Inventor :: Change Text Height Of Drawing View Label Through VBA?
Jan 28, 2013Is it possible to change the text height of a drawing view label through VBA?
I have tried to change it by creating a new text style manually with the text height I require and then through VBA set the view label to use that style.
The View label takes on the new style but does not change the text height.
I have tried to use 'StyleOverride FontSize=' but I have text that is multi lined and using this command converts all my text onto one line.
Is it possible to change the text height of a drawing view label through VBA?
Below is my code so far,
Sub HoleDetailSheetLabels()Â Â Â
' Declare the Application object
Dim oApp As Inventor.Application
' Obtain the Inventor Application object.
' This assumes Inventor is already running.
'Set oApp = GetObject(, "Inventor.Application")
[code]...
AutoCAD Inventor :: How To Change The Defaults In Hole Table
Jul 16, 2013The hole table has a column named description, but in that column i want to change the defaults for the thread, i don't need the thread class, for example.
I can add or remove thread properties to the table, but i don't want to, i want to use the general Description column, which describes not only threads.
AutoCAD Civil 3D :: How To Change Label Text
Apr 11, 2013I am trying to scale down my label text insdie of my viewport. Its about twice the size that i would like.I tried to use the scale command but nothing happens.
View 3 Replies View RelatedAutoCAD Civil 3D :: Change Text Color In Point Label Style Based On Variables
Sep 27, 2013Is there a way to set up a custom Point Label Style that will change the text color if the information entered meets particular criteria? I will be entering sample measurements taken on two (2) different dates, but if the sample data is greater than 1.0, I want it to show up a different color.
View 4 Replies View RelatedAutoCAD Civil 3D :: Point Label Size Change When Label Is Moved?
May 8, 2012The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies View RelatedAutoCAD Inventor :: API And Section Cut Text Label?
Dec 12, 2013I am trying to use the Inventor API to customize the text label that appears next to a section cutline in a drawing.
The text in question can be modfied through the Name variable of the SectionDrawingViewType object. However, this approach changes both the name of the SectionDrawingViewType object, as well as the text next to the section line. Is it possible to access just the section line text through the API? Is this text field exposed? Which object type is this text field?
AutoCAD Civil 3D :: Edit Label Text In Parcel Label
Jan 3, 2013Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies View RelatedPhotoshop Elements :: How To Change Menu Buttons Text Label From Black To White
Aug 8, 2013How do I change the menu buttons text label from black to white?
View 2 Replies View RelatedAutoCAD Inventor :: 2D Dimensioning Quality - Adding Text Label
Feb 6, 2013I find the 3D side of the software is great for modeling. But when it comes to the 2D drawing side of it, especially dimensioning and the adding of text label is very poor, when compared again other CAD packages including AutoCad Mechanical and LT.
Why is it not on par with AutoDesk other 2D packages!
(Using Inventor 2013)
AutoCAD Inventor :: Remove Text Label From Detail Boundary?
Oct 1, 2013How to remove the view label text which is attached to a detail boundary? I know that if you double click ont he etxt you can manually delete it from the format text window but I want edit the default setting so that it doesnt appear on creation.
See attached image.
AutoCAD Inventor :: Style And Standard Editor - Edit View Label - Format Text TYPE
Sep 25, 2012Autodesk 2013 Inventor Professional.
1. When in style and Standard editor with default standard selected under Standard I am trying to display mass properties in my view label.Select View Preferences tab. View type Base. Next to Display select Edit View Label.When Format Text box pops up in the selection for text type I have two options.
    a. Properties - Model
    b. View Label Properties
2. Inside an IDW file right click on view and select edit view.When Drawing View box pops up there is the option to access Edit View Label next to View Identifier.When Format Text box pops up in the selection for text type at this point there are seven options.
    a. Properties - Model
    b. Properties - Drawing
    c. Drawing Properties
    d. Sheet Properties
    e. Physical Properties - Model
    f. View Label Properties
    g. Sheet Metal Properties
Questions 1. Why are ther only two options in S&S Editor?
                 2. Can I add more options to S&S Editor?
I would like to add mass to my lablel inside certain templates and have it show when I display a views Base view label. Not ot have to maunually add it each time it is displayed.
Paint Shop Pro :: Any Way To Change JPG Save Defaults?
Dec 12, 2012I just realized that the default is set to 20, which is too aggressive.
However, I don't see the way to change it in preferences.
Do I need to change the compression factor with every single save ? Or is there a way to set it in program defaults ?
Photoshop :: How To Change Image Size Defaults
Feb 10, 2009I have a burning question. In CS4, when I use the Image Size command, the default units are centimetres instead of inches under Document Size part of the dialog box.
I know that keeping rulers set to inches will change that default, but I distinctly remember the time when I was able to keep my rulers set to pixels, and my Image Size to inches at the same time.
Something changed at some point and I can't figure out what. How can I keep my rulers set as pixels, but the Image Size dialog box to inches at all times?
Illustrator :: CS6 - Dictionary Defaults To English USA Can't Change
Jun 26, 2012The dictionary in the Character Palette always defaults to English USA in CS6. I have changed the setting Preferences > Dictionary and Hyphenation to English UK, but the Character Palette doesn't change, even though the setting remains changed in Prefs. I have opened each of the New Document Profiles in ..AppDataRoamingAdobeAdobe Illustrator CS6 Settingsen_USx64New Document Profiles (Windows 7) and changed the language in the Character Palette to English UK, and it STILL goes back to English USA!
View 6 Replies View RelatedLightroom :: Library Filter (Metadata) Defaults - Change
Aug 15, 2013I have been using LR each and every day I have never once utilized any of the four default terms cooked-into the 'Metadata' Library Filter ('Date', 'Camera', 'Lens', 'Label').
Â
Is there a way for me to set up new metadata search terms as defaults so I don't have to putz w/changing the same-old-same-old each and every time I open this filter?
AutoCAD Inventor :: XML Defaults In IDW Files?
Apr 16, 2013I am currently using Autodesk Inventor 2013, but I noticed this same issue back when I used 2011 as well.
I created custom borders and title blocks for work, and have gotten those to a default template that I can open as a new IDW file on command, but the XML files used for that IDW are still linked to the default files located in the design data folder.
I have saved my company's custom settings such as line weights, dimensioning defaults, tables, etc. as a STYXML file, and have resorted to simply importing my company's defaults whenever I create a new IDW file, but I was wondering if and how to "re-link" the IDW file that I open to use my company's default settings instead of Inventor's default settings and then needing to import the STYXML every time.
Lightroom :: Change Page Setup - Print Module Defaults To Letter Size
Mar 11, 2014I have a set of Lightroom Print templates that I am trying to use, that are all for a 4x6 print. I can't get it to work because my page setup in the print module defaults to letter size. When I go in and change the page setup, it messes up the template and it gets all jumbled. Then when I go on to the next template, it switches back to letter size again. I want to create and hold a 4x6 canvas so these templates can either be saved to a 4x6 .jpg or printed on 4x6 paper. I know I can save a printer and page layout as part of a template by clicking the "update settings" once I have it all as i want it, but I can't even get that far because it messes up the template as soon as I change the page settings to 4x6. How do I get the canvas to 4x6 on templates that are already created so I can save them as a 4x6 .jpg or print to 4x6 paper?
Â
I even just installed a printer that only prints 4x6 to see, but again, when I change the page layout it completely messes up the template.
AutoCAD Inventor :: Sheet Metal Defaults Dialog Box
Oct 13, 2011After installing the 2012 Ultimate upgrade I haven't encountered any serious issues until yesterday when I found that my
sheet metal dialog box opens so far in the upper left corner that I can't grab it. In effect, I can only see the right corner of the box including part of the close button. All other buttons, including the location where I can drag the box, are out of view and unusable.Â
CorelDRAW Graphics Suite X6 :: New Text Defaults To RGB?
Sep 5, 2013Whenever I create new text in a document, it defaults to RGB. When I start a new page, all of my settings are set to CMYK. I rarely use RGB. Where is the setting so that I can default new text to CMYK? I cannot locate this setting an any of my options.
View 2 Replies View RelatedPhotoshop :: Text Orientation Defaults To Vertical
Jun 1, 2009About a week ago my text suddenly defaults to vertical eveytime I start to enter text.. just aggrivating, I have to start typing text, then go up and click on the change text orientation button each time. I can't figure out how to change the orientation back to a default of horzontal.
View 4 Replies View RelatedAutoCAD Inventor :: Drawing View - Display Option Defaults?
Apr 30, 2010I cannot find any information anywhere on whether there exists an option to save different defaults to the Place Views>Base Drawing View>Display Options tab? The parts I model always need "tangent edges" shown to look correctly on my drawings, and for 5 years I've had to manually select it every time I do a drawing. It just seems that there has GOT to be a way to get rid of this tedious step? And if there is not, can you plainly include this in the documentation so I can stop looking for such a feature?
View 8 Replies View RelatedAutoCAD Inventor :: How To Make Copies Of Default Ones And Set In Object Defaults
Mar 11, 2012I have created a new drawing template, setup all border/title blocks and dimensioning styles as I would like. Save as a template and load it up from the 'new' menu, gives me this error and I am not clear on why since I set the details in it...
Not sure what the deal is but it resets my styles to default. Do I need to make copies of those default ones and set those as in my object defaults?
Inventor 2014 PDS
AutoCAD Inventor :: Object Defaults Based On Active Standard?
Jan 20, 2012On a daily basis I work with two different types of drawings; machining and fabrication. The machine shop prefers dimensions in decimal inches, and the fab shop only understands fractional inches. Is there any way to set up the styles/standards/templates to allow me to pick out which type of drawing I am creating and have Inventor use the correct object defaults for the dimensions?
View 4 Replies View RelatedAutoCAD Civil 3D :: Override Text Background Text In Label Style?
Oct 24, 2012I like using the edit label text in the lable styles to add additional text and information.
I can turn on / off the backroung mask for all the style but not each.
Is there a way to turn on / off the backround mask of each layout text.Â
I'm using civil 3d 2012 and testing 2013.
AutoCAD Civil 3D :: Label Text To Be Center Justified In Dragged State Stacked Text
Apr 11, 2013In the dragged state, I don't want to use 'As Composed' because the label is composed to be parallel to the line, but I want it to flip to horizontal to the view when dragged. Â This is working fine with 'Stacked Text'
What is not working is the text justification. Â I want it to remain centre justified, as it is composed. Â But there doesn't seem to be any option for this when you use the 'Stacked Text' option for the dragged state. Â I thought that setting the 'Leader Justification' to false might do it, but that just makes it always left justified. Â Am I missing something here? Â Is there no 'Top right/bottom right/middle center/top left.....' option for Stacked Text? Â And if not, why not?
I'm in 2011. Â
AutoCAD Inventor :: Sheet Metal Defaults (Use Thickness From Rule) - ILogic
Sep 9, 2013know a rule to check if this dialog box sheet metal defaults "Use Thickness from Rule" is checked, and checked a rule to automatically clear since using a rule amending the plate thickness but if the box is checked catastrophic error occurs, and unchecking the rule works as expected.
View 2 Replies View RelatedAutoCAD Inventor :: Parts List - BOM View Grays Out And Defaults To Structured
Jul 8, 2011I want to place a "Parts Only" BOM view of my Parts List. In the Parts List dialoge box, when view or document is selected, BOM View grays out and defaults to "Structured". This issue is new to my work station and is not an issue to the other stations. Why? How can I fix?
View 5 Replies View RelatedAutoCAD Inventor :: Setting Default Dimension Styles Different Than Object Defaults In Style Library
Apr 5, 2012We have, as our standard library default dimension style, a 1/32 fractional style, called "1/32-FRACTION". Various Object Types, like Linear Dimension are set to this Object Style. When I create a drawing, then these Object Defaults are in effect.
This means that, doing nothing while executing a dimension command, I get fractional dimensions by default. This works good.
However, sometimes I want to create a drawing where the default dimension style is "X.XXX-DECIMAL" without changing the Object Defaults found in the style library. I've tried to make the changes from within the style library and then save this as a template. However, when I try to make a drawing based on this template, Inventor states that the styles in the template differ from the styles in the library" and then busily goes about undoing what I careful did.
So I'm hoping there is something in the API I can call on to do this with a macro. Is it possible to write a macro that after you start a drawing, flips all the various Object Styles from "1/32-FRACTION" to "X.XXX-DECIMAL"?
Photoshop Elements :: Color Selection For Text And Shapes - Defaults To Shades Of Gray
Nov 28, 2012When I select a color for text and shapes, the software defaults to shades of gray, although black and white are available. I use the eyedropper to select red on the pallette, for example, and the red box is framed. But the color sample on both the menu bar and the tool bar sets to gray. Is there a swicth somewhere that inhibits red, green, blue, etc.?
Â
I even reinstalled the program, thinking I had a glitch--no change. The color selection had always worked in the past.