AutoCAD Inventor :: How To Make Copies Of Default Ones And Set In Object Defaults
Mar 11, 2012
I have created a new drawing template, setup all border/title blocks and dimensioning styles as I would like. Save as a template and load it up from the 'new' menu, gives me this error and I am not clear on why since I set the details in it...
Not sure what the deal is but it resets my styles to default. Do I need to make copies of those default ones and set those as in my object defaults?
We have, as our standard library default dimension style, a 1/32 fractional style, called "1/32-FRACTION". Various Object Types, like Linear Dimension are set to this Object Style. When I create a drawing, then these Object Defaults are in effect.
This means that, doing nothing while executing a dimension command, I get fractional dimensions by default. This works good.
However, sometimes I want to create a drawing where the default dimension style is "X.XXX-DECIMAL" without changing the Object Defaults found in the style library. I've tried to make the changes from within the style library and then save this as a template. However, when I try to make a drawing based on this template, Inventor states that the styles in the template differ from the styles in the library" and then busily goes about undoing what I careful did.
So I'm hoping there is something in the API I can call on to do this with a macro. Is it possible to write a macro that after you start a drawing, flips all the various Object Styles from "1/32-FRACTION" to "X.XXX-DECIMAL"?
On a daily basis I work with two different types of drawings; machining and fabrication. The machine shop prefers dimensions in decimal inches, and the fab shop only understands fractional inches. Is there any way to set up the styles/standards/templates to allow me to pick out which type of drawing I am creating and have Inventor use the correct object defaults for the dimensions?
I'm not finding where to change the default Description for Creating Cogo points by the Create Points-Alignments>At Alignment Geometry method
The last characters PC, PT RP etc. seem to be controlled by the Drawing Settings>Abbreviations but the Alignment name and stationing is what I'd like to eliminate from the description if possible.
Almost seems hard coded but hopefully I've been looking in the wrong places.
The descriptions are coming in like the caption whether I select Raw or Full description option.
In command settings for Point>Create Points>Points Creation>Prompt for descriptions>Automatic - Object is what I'm using.
What I'm hoping to accomplish is just PC, PT RP etc for description without the find / replace edits I'm currently doing in the exported ascii files.
C3D 2012 SP3 & C3D 2014 SP1 Win 7 Professional 64 Bit
I am using Inventor version 2011. I wrote this code which tells me which object defaults style is active
Public Sub ActiveObjectDefaults()
Dim oDocument As DrawingDocument Set oDocument = ThisApplication.ActiveDocument Dim DrgStMgr As DrawingStylesManager Set DrgStMgr = oDocument.StylesManager Dim ObjDfStyle As Style Set ObjDfStyle = DrgStMgr.ActiveStandardStyle.ActiveObjectDefaults MsgBox ObjDfStyle.Name End Sub
Is it possible to change Active Object Defaults Style by VBA code (see picture below)?
I am trying to change Object Defaults in order to temporarily switch style which use layers with different line weights, and than switch it back. I am new to VBA so I am not sure if I am not trying to do something what is impossible.
Can you have more "Object Defaults" then there is standards?I ask because everytime I create an additional one and don't have a standard for it to link to and I save the styles it disappears.
We are making road , it has intersections with simple roads wich leads to forest or a fields or to a private territory. We have 60 of those intersections (crossroads) , if we would start making them all with intersection wizzard it would take a lot of time... , maybe there is simpler way to make such an easy crossings ? ( all of those crossroads are same type same geometry, the only difference is location)
I`m using Inventor 2012.When i select a new sketch from the New file drop down selection box ( new sketch picture) the XY plane is a different view to when i select a new sketch from the Part selection box (new sketch 1).
How can i make a default work plane when opening a new sketch?I would like to have the work plane identical to the new sketch picture when ever i open a new sketch file
I have an object of given area and would like to make copies of the object at a different area. It is an irregular object so is not something readily calculated in Windows calculator, any macro that would do this in X5?
if there is a SIMPLE way to make a copy or duplicate of a photo in LR4. In otherwords, you have a photo image in one folder and you want to make a copy and move it to another folder or subfolder and that copy is identical in EVERY aspect to the original photo and can be edited, manipulated, etc. without affecting the original. I can find nothing on this subject - all I keep getting is this VIRTUAL COPY which is NOT like the original and cannot be moved without the original (Master) going along with it. What's the problem? Every image program I know of can do this. BTW this in on a Mac Lion (10.8.4).
I am currently making virtual copies of all my photographs converting them to black & white I am then choosing which one to keep. If I keep the original no problem, I can remove the virtual copy however if I choose the virtual copy I have to keep the original copy or export the virtual one. Is there a way I can make the original the virtual copy and the virtual the original. As things stand I have loads of photos showing in lightroom that I do not want.
I am having an issue that cropped up as of late - I try to create a virtual copy of a photo, but instead of the normal page-turn icon in the bottom left and it auto-expanding to show the copies, it just creates a stack, and says "2" or "1 of 2" and the double line bars on both sides of the preview in Grid Mode. Is there a setting that I changed that caused that?
I have an object with several animation layers. When I clone(copy) it, the new object also has the same animation layers. That should be OK.
The weird thing is, when I start to mess with the animation layers of the second object. If I disable, lets say, layer02 on the second object, it affects(disables) layer02 on the first one. Somehow the objects are connected through the animation layers.
Is this the normal behavior of the animation layers? And if it is, how can I make two separate copies of the animated objects?
Inventor will not let me make a hole on the top of my object. The hole conformation button is grayed out no matter what the parameters are. I have tried to extrude a hole from a circle and same deal; it will not let me extrude the circle.
I am currently using Autodesk Inventor 2013, but I noticed this same issue back when I used 2011 as well.
I created custom borders and title blocks for work, and have gotten those to a default template that I can open as a new IDW file on command, but the XML files used for that IDW are still linked to the default files located in the design data folder.
I have saved my company's custom settings such as line weights, dimensioning defaults, tables, etc. as a STYXML file, and have resorted to simply importing my company's defaults whenever I create a new IDW file, but I was wondering if and how to "re-link" the IDW file that I open to use my company's default settings instead of Inventor's default settings and then needing to import the STYXML every time.
The hole table has a column named description, but in that column i want to change the defaults for the thread, i don't need the thread class, for example.
I can add or remove thread properties to the table, but i don't want to, i want to use the general Description column, which describes not only threads.
How can i remove the scale that is automatically added to the label text of a projected or auxiliary view? The label text style governs only the font etc.
After installing the 2012 Ultimate upgrade I haven't encountered any serious issues until yesterday when I found that my
sheet metal dialog box opens so far in the upper left corner that I can't grab it. In effect, I can only see the right corner of the box including part of the close button. All other buttons, including the location where I can drag the box, are out of view and unusable.
how to change the the appearance of indivitual copied object when using the pattern tool. I can change the appearance on the original object (which is red on the picture) but im having problem changing the the appearance of the other objects ( i want all of them to have different colors)
I have never seen this before we implemented vault. But, this could be a inventor related issue. In vault collaboration 2012 we use a single project file for all projects. The ipj file is checked into vault. We keep a unchecked-out copy in the working folder. By the end of the day I must I started and closed inventor several times. I notice that there are several copies of shortcut link (lnk) files to the ipj file created in the same location as of ipj file.
Inventor Professional 2013 Vault Collaboration 2013
I cannot find any information anywhere on whether there exists an option to save different defaults to the Place Views>Base Drawing View>Display Options tab? The parts I model always need "tangent edges" shown to look correctly on my drawings, and for 5 years I've had to manually select it every time I do a drawing. It just seems that there has GOT to be a way to get rid of this tedious step? And if there is not, can you plainly include this in the documentation so I can stop looking for such a feature?
On a few random idw files we are seeing the default "Number of copies" in the settings section of the print dialog box with strange high numbers in this case 693965387. As soon as the user selects a different printer the number drops to 1. If the user selects the printer properties and navigates to the advanced page the Copy Count is 1969. I have checked the default printer settings and it is set to 1 copy.
know a rule to check if this dialog box sheet metal defaults "Use Thickness from Rule" is checked, and checked a rule to automatically clear since using a rule amending the plate thickness but if the box is checked catastrophic error occurs, and unchecking the rule works as expected.
I want to place a "Parts Only" BOM view of my Parts List. In the Parts List dialoge box, when view or document is selected, BOM View grays out and defaults to "Structured". This issue is new to my work station and is not an issue to the other stations. Why? How can I fix?
ObjectId slgId = SampleLineGroup.Create("My SampleLineGroup", alignment.ObjectId); I don ´t want ask to user the sampleLineGroup name by prompt. I want to create a new sample line group which its name was default template name.
Autocad Civil 3D 2014 +SP1 Quad Core Intel i7 3770-cpu 3.40Ghz. ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd 32gb RAM 1600 Mhz. nVidia Quadro 2000. Win 7 Pro 64bit
Is there any way I can make every drawings ALWAYS print in monochrome?
I'm getting really tired of having to set it to monochrome every time I plot something. Or even worse, printing 10 copies of something and THEN noticing i forgot to set it monochrome (just happened). I will never NOT want to plot in monochrome.
