AutoCAD 2010 :: Text Line Width In Model Space
Dec 4, 2012
I need to change the text line width in model space, not the overall text width or the text line width/weight in paper space. Our mold maker wants to measure that on screen and he wants to set the text line width to 0.060”, while the overall text width fixed.
For example, the text “REMOVE FROM BOAT” is 3” wide total from first letter R to last letter T and height 0.4”. That is easy to do. The hard part is that he wants the line in each letter to be 0.060” (1.5mm) wide. I practiced the true type text which is measurable in model space, but that is fixed with for a certain font with a certain size. I can change from one font to the other and get different thickness but cannot change the width freely to 1.5mm as requested.
View 9 Replies
ADVERTISEMENT
Dec 22, 2011
line width does not display in either model or paper space, is there a way to make it display without going to print preview?
View 1 Replies
View Related
Aug 9, 2012
I use IN MODEL SPACE command:
view/ viewports/ two viewports (horizontal or vertical)
just ordinary split window in model space.
I found out that is missing line between viewports. I am looking in options but there is nothing.
Which command or system variable it is???
View 2 Replies
View Related
Sep 13, 2010
when working in my current drawing (Model Space), i create a new mtext item, and it shows in bold, i am aware of the common problem of the text items having a z height other than 0.00 causing this, but i have checked, and reset the z height, have also tried the flatten command, and even tried explode and then flatten/z height.
View 9 Replies
View Related
Sep 27, 2012
For some reason when I place new text or line work in a file it is fine, but when I save the drawing, close it and re-open it all of the text and line work found in model space goes gray. Yet if I place new text and use the match property command on text placed previously, that is now gray, and use it on new text, the new text recieves the attributes of what the previously placed text has minus the appearance of being gray. In my drawing I am using a shape file and a data connect image through planning and analysis.
View 1 Replies
View Related
Feb 10, 2012
I am having trouble with width factor in Model Space. I change the width factor and it seems to change but when I print it has changed slightly but not to what it has is model space. I dont really want to have to check the print preview to see if it is correct. Is there a way of displaying the correct width factor in model space?
View 3 Replies
View Related
Dec 26, 2012
Wile using acad2011...
In model space I set the units form my dwg (cm), draw a line (100units). Next i go to paper space, create a viewport. When the viewport scale is set to 1:1 the ploted line is 100mm in length (not 100cm). Why is this so? How should I correct this? Changing of units in model space does not effect the length of the line in paper space.
View 5 Replies
View Related
Mar 15, 2013
Which settings or where do I go to set my drawing Style, Text height and line space factor on all my drawings in one shot. It is frustrating going through many drawings changing it.
View 9 Replies
View Related
Apr 12, 2013
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
View 9 Replies
View Related
May 2, 2012
determine if Fields can be used in model space inside a block and show up in the paper space view as a correct number, (say for a detail number)? I have all of my detail blocks in model space and would like to place fields in the title blocks of the details so that they would show the paper space sheet number that they are being shown on in paper space. I have done some experimenting and cannot seem to get it to work. Or will this just not work?
1.- Details in model space are blocks, and I want to edit the block and insert a field into the detail callout.
2.- I want to have the model space detail read the paper space drawing number, and have the fields change to the proper sheet number.
3.- The result will be the that the model space block fields have changed to the proper detail sheet number shown on the paper space border.
View 4 Replies
View Related
Mar 15, 2012
I have a drawing that has several Paper Space tabs, and each tab has one or more viewports.
When I open the drawing, I can see all the information in Paper Space mode, and I can access the Model Space through the viewports, using the MS command. When I switch to Model Space, nothing is displayed.
View 4 Replies
View Related
Mar 13, 2012
So I just recieved drawings from a contractor and they placed all the multileaders and details on the paper space but when I go to change the model space things are no longer pointing at the right spot.
What I am trying to do is copy them into model space but.... when I use crtl-c from paper, crtl-v to model it doesn't scale properly.
View 1 Replies
View Related
Apr 13, 2012
Basically I've got a detail specific to my design, I've extruded all of the layers up to their desired levels etc, but now I want to be able to rotate it all so that instead of these layers being orientated vertically, they are orientated horizontally, if that makes sense. I understand that there is something involved with the UCS but I'm not sure how to get this to work. This may be an issue with my computer as I know my laptop graphics card is pretty rubbish and impacts a lot of 3d programs such as Rhino and SketchUp so this could be the issue here
View 2 Replies
View Related
Aug 24, 2012
ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
View 9 Replies
View Related
May 2, 2013
I am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
View 5 Replies
View Related
Oct 24, 2012
I use x-ref's inserted in model space and label in paper space - always.
I would like to see a way of locking out model space while editing text in paper space. Unless you double click right on the text, you often end up in Model Space...I know - big deal right? It can become annoying or a big deal when a deadline is looming - when is one never? Also big fan of locking viewports.
View 9 Replies
View Related
Jan 31, 2013
When I create drawings of the objects in model space but can I add text annotations, leaders, dimensions etc in paper space.
View 9 Replies
View Related
May 2, 2012
I have been working on a set of residential drawings. I Have read several different ways to achieve text size when plotting.
I currently have all my text and dimscale set to 0" height. I have the 'scale dimensions to layout (paper space)' radio button checked. However, I cannot see even the slightest hint of test when looking at my screen. I sent a dwg to a friend of mine who plotted it. no text was visible. What height should I set the text to in order to achieve an 1/8" tall plotted text? I cannot see text in either the model space or in the paper space.
View 6 Replies
View Related
Nov 1, 2006
How I would change both the model and paper space thickness of a line in AutoCAD 2004? I've tried changing "line thickness" and "line weight" in the properties dialog box but it doesn't seem to matter whether it's 0 or 9,999,999 or any number, it just looks the same, in both the model space and paper space views.
I have a drawing someone else did that uses polylines of different thickness so I have tried to figure out how they did it. Again, looking at the properties dialog box it seems to make no difference what I set the "line thickness" or "line weight" properties to...the line just stays the same size regardless.
I want to change line thicknesses because I'm designing a surface water pipe layout...I want the pipes to be a lot thicker than the lines that represent the actual building so that they will stand out when I plot the drawing.
View 9 Replies
View Related
Aug 6, 2012
I have a file thats doing something wierd, when I open it I can see the layouts just fine, the existing viewports show linework from model space. However, when I switch to the model space tab I don't see anything, my mouse cursor dissapears when I move it over the drawing area but reapears when its moved over the ribbon or the prospector/command prompt. Also, when I create a new layout with a new viewport, nothing is displayed in the new viewport. It's like the program cant regen the view? When I went into one of the existing viewports and zoomed out I could see all the linework in model space but when I switch to the model tab it won't show any linework or the UCS indicator or my mouse cursor!?!
View 8 Replies
View Related
Nov 23, 2012
Why when I choose a new layer (which happens to have a different colour association) the colour of the new drawn line stays the same?
[URL] .....
I understand there is some setting you type in the command line to solve this problem but I am unable to find what that is.
View 2 Replies
View Related
Mar 19, 2013
I dont use paper space at all. i mostly work in model. but i just want to explore the paper space side.
I have my lpaperspace dimscale set at 1
In the model space my picture is drawn to scale, so its like 12 feet tall.
when i put the viewport in and get the picture positioned in the viewport, when i dimension the model in the viewport my dims are set according to the paperspace dimscale.
is there a way i set the dimscale in the viewport at a different dimsale then the dimscale set in the paperspace without having to set the dimscale in the model space?
View 4 Replies
View Related
Nov 26, 2013
Multiple layouts in model space suddenly stopped showing boundaries.
View 1 Replies
View Related
Oct 8, 2012
I have a sheet drawing with all my background xref'd into it. How do I rotate the view in model space so it will show appropriately in the sheet view in paper space?
View 1 Replies
View Related
Nov 9, 2013
in general, I add my multileaders in paperspace after I have set my model space scale. However, I am now bound to that scale! That is, ML in paperspace really only have one scale: 1-1, right? For example, I wanted to zoom in to a part of my project (ie, reduced my scale by a 1/3) and all my ML we pointing erroniously into space.
Just so I undestand, if one anticipates changing the scale of a drawing mid-project, the ML should be made annotative, and placed in model space?
View 1 Replies
View Related
Aug 16, 2012
I received a drawing form a vendor that is in 3d (27 meg)...this drawing contains the model and 4 paper space sheets.
These sheets contain different pieces of the 3d model. I need to create four 2d drawings (one for each sheet). I have tried "export layout to model" with no luck as most of the drawing does not export. I have tried to copy to clipboard but, drawing is too large for the clipboard. I have looked in the "help" and there seems to be nothing on converting a 3d drawing to a 2d drawing or extracting indivigual sheets to a 2d format model. I have tried exploding the information on the sheets in order to get everything to export but that doesn"t work.
View 2 Replies
View Related
Aug 22, 2012
Suddenly, this week, Paperspace no longer has a 0,0.
For decades I've inserted my Titleblocks in Paperspace at 0,0.
This week, it inserts it relative to 0,0 in Modelspace in one of the Viewports.
Which means the Titleblock is "Waaay Offf" to quote Rodney Dangerfield.
If I draw a line in Paperspace and start it at 0,0, again, it's the Modelspace 0,0 in a Viewport.
Was this an improvement that I didn't know of?Or did I accidentally change some setting?
View 5 Replies
View Related
Jan 9, 2012
We are running AutoCAD 2011 and 2011LT on Windows 7 with 12gb of ram and a NVIDIA Quadro 4000 video card.
The problem did not happen to often when we were on XP, but now, whenever we're in a command, the screen jumps as if snaps were turned on with 1/2" spacing. We've tried upgrading the drivers and graphics cards as well as installed all updates I could find. We make sure drawings are purged and audited and Layer manager IS NOT kept open.
View 6 Replies
View Related
Feb 7, 2013
Civil sent a sheet and reference file. I need to reference the civil file into my architectural model file. The civil sheet file has a viewport with most of layers and colors properties set the way I need them to appear in my architectural model floor plan. The civil view is using VPLAYER overrides properties. How can I get civil's viewport layer overrides set current in model space of thier file? I can reuse the file as my architectural backgound model file.
View 2 Replies
View Related
Apr 24, 2013
I've picked up someon elses drawings and for some reason in paperspace the ltscale is set to 10. i've tried changing the global scale factor to 1 in the linetype manager but it keeps changing back to 10 when i tab through the different sheets.
i normally have both my ltscale and psltscale set to 1 in paper space (and celtscale=1) and have a custom macro asigned to a button for my modelspace views ie 1.100,20,10 etc and a macro/button setting the ltscale back to 1 when returning to paperspace and this worked nicely.
why the global scale factor keeps reverting back to 10?
View 2 Replies
View Related
Jun 18, 2012
I was working in model space and when I hit zoom extents, I lost all of my drawings in model space. They must be there because I can see them in layout, but I am not able to locate them in model. For some reason my cross hairs and the ability to draft have disappeared too. I am sure I must have hit a setting that needs to be changed back.
View 3 Replies
View Related
