how to create a Shortcut key "Alt + c" for "File - close" command? I like the same seeting as my Inventor seeting, and the Inventor is so easy to setup my Shortcut keys use "Tools-Customise-Keyboard".
View 9 Replies When i type O for offset Command its not working its shows following error, i have attached the screen sort.
then i write full command "Offset" its working, like this many shortcut command are not working (Array, Reactangle, Fillet etc.)
know if the shortcut command 'LAYOFF' can be edited. Edited to something shorter.
If so, were is this located to do so.
How do you change/edit command shortcut keys? For example, I would like to change the keyboard shortcut key for the command COPY to "C" instead of "CO" and CIRCLE to "CR" instead of "C" because I use the COPY command much more than CIRCLE and I'd like to maximize my drafting efficiency. In older versions of AutoCAD, you could open the acad pgp file and edit the info using "wordpad"; however, I have not been able to find that same file for this 2011 version.
My system is:
Gateway AMD Phenom II X4 820 quad-core processor 3 GHz
Windows 7 Professional 64-bit os
ATI Radeon HD 4250 graphics
640 GB hard drive
6 GB DDR3 memory
I have a problem where autocad will hang for almost 1 minute if I type in a misspelled command shortcut or misspelled command. For example if I try to type in "line" and I type in "linr" it will hang up for around 50 seconds. Is there a setting, system variable or key in the registry to stop autocad from looking for a command/shortcut that doesn't exist?
View 6 Replies View RelatedIs there a faster way to close a group of windows or all windows at once than clicking on each one and waiting for it to close?
View 4 Replies View RelatedHave tried at least three different key combos using workspace, keyboard shortcuts.Have set them up successfully but they don't seem to want to close tab groups.I have set up other special keyboard shortcuts (like flatten image) which work great
View 4 Replies View RelatedIn shortcuts or preferences, is there a keystroke which would activate the "close without saving" button??
View 2 Replies View Related“Command” and “Option” settings in the AutoCAD...Is there a way to save the “Command settings” and the “Option settings” in the file but not on the “AutoCAD program”?
Examples:
The default of the “Isolate” command is “Lock and fade” For me I prefer to switch the this setting to be “Off”The default value of the command “FIELDEVAL” is 13. For me I prefer to switch the this setting to be “Off”The default setting of the “default mode” is “shortcut menu”. For me I prefer to switch this setting to be “repeat last command” ( I go to options>>user preferences”>>Windows standard behavior>>Right click customization>> default mode>>repeat last command. Is there a way to save these settings on the file such that if we open this file in another computer then we don't need to set them again?
In other words, why aren't the “Default settings” “Option settings” saved on the file the same way the “Drafting Settings: like sanps, Osanps” are?
I would like to save my opened dxf drawing again as dxf with one click by custom button.
I was trying the next code
^C^Cdxfout;;y;v;2004;16;;
It returns the message "Can't open file", it seems like it does the save only when initial file is dwg.
The goal I wish I click a custom button and will save my opened dxf drawing back to dxf in 2004 format.
Nothing works to close this window except mouse/clicking... I don't like it being in the background when I'm working in other apps.
View 4 Replies View RelatedIs there a keyboard shortcut to close the Tiltle Tool after creating text?Having to mouse-click the red "Close" button is not an efficient process after typing text..
View 5 Replies View RelatedI need to copy and rename my current drawing then open the copied drawing, and I need to close the original drawing.
However when I try to both open the renamed drawing and close the original drawing (in the code below), the original drawing will not close.
If I don't open the renamed drawing, the following code works and I can close the original drawing.
[CommandMethod("TestClose", CommandFlags.Session)] public void TestCloseDocument() { string fullName = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Name; string projectDirectory = System.IO.Path.GetDirectoryName(Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Name);
[Code] .....
When I use the move command to, let's say, to move a floor plan (drag to new location on the page), some of the lines in the "moved" floor plan are either skewed or missing. I'm able to "cut and paste" as welll as "copy with basepoint" w/out problem.
See attachment below.
How might I correct this problem?
Been searching for this one. Haven't been able to find an answer.
View 6 Replies View RelatedDoes the command still exist to export a drawing to the 3DS file type? I remember doing it in 2007, but do not remember the command and can not find it in the help files.
View 9 Replies View RelatedI want to add an attribute to a BLK file I have from a past release. Using this .BLK file, I can create a table from attributes in my drawing using a LISP routine.
It seems there is no way to create or edit a .BLK file that I can use for this in ACAD 2011, it only creates .DXE files.
The problem with the .DXE file is that is saves the drawing that the original extraction is performed on. When I use the .DXE in another drawing, it uses the original drawing data unless I manually "delete" the old drawing reference using the dialog box in the extraction wizard.
The .BLK file works perfectly, but I want to add an attribute. How can I create a new, or edit my old .BLK file?
Will I have to reinstall an older version of AutoCAd to accomplish this?
I wrote some LISP programs. I would like to use the output data generated by LISP program in Command arear of AutoCAD. I Heard we can dave the output data into .dat files.
View 9 Replies View RelatedI've seen this happen with a couple of the previous releases, but not for some time. After the CLOSE command is issued, the drawing graphics remain displayed but no AutoCAD specific keyboard or mouse input is accepted. More of an annoyance, I guess, as Control + O will then allow opening of another drawing file. This just started today for no apparent reason after using 2014 for the past week or so. Prior to this happening, my workstation locked up completely while trying to close a CAD file and Task Manager wouldn't take any input.
Win 7 with Service Pack 1, 64-bit
16 GB Ram
Intel Core i5 CPU
is it possible to switch on all layouts by one command (shortcut)?
View 5 Replies View RelatedI want to know how to change subcommand shortcut
When I do a Polyline, after i done an arc section, I would like to be able to press "F" instead of "L" to do a line section...
Is there an easy way to do that or do I have to reprogram a new Polyline command in lisp with the subcommand shortcut that I would like? (would prefer to avoid it as sometime I have to work on LT)
The reason behind all of this is that I remapped all my command to keys that are on the left side of the keyboard ... it work really well and I almost never have to lift my left hand except for the case with the polyline... the L key is miles away ..
Right now I remapped a button on my mouse to "L" but its not as natural as just using the keyboard.
Where did they hide the "close all" command or what was it renamed to? It's not in the Unused Commands, nor can I find it in the File command list
View 7 Replies View RelatedI want to know how to change subcommand shortcut
When I do a Polyline, after i done an arc section, I would like to be able to press "F" instead of "L" to do a line section...
Is there an easy way to do that or do I have to reprogram a new Polyline command in lisp with the subcommand shortcut that I would like? (would prefer to avoid it as sometime I have to work on LT)
The reason behind all of this is that I remapped all my command to keys that are on the left side of the keyboard ... it work really well and I almost never have to lift my left hand except for the case with the polyline... the L key is miles away ...
Right now I remapped a button on my mouse to "L" but its not as natural as just using the keyboard...
without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
If you have more then 1 dwg opened, and you close 1 dwg, wants to close the other dwgs as well?
View 7 Replies View RelatedIn the menu under File there is a command "Close and Go to Bridge" Is there a way to do something similar for returning to Lightroom after a "Save"?
View 1 Replies View RelatedSuddenly I got this issue when I draw an area boundary its not possible to close it with "enter" or "spacebar"..
View 9 Replies View RelatedAutoCAD 2010. I was editing a block in the block edit screen and it wouldnt save the block. My screen froze and I had to reboot the computer. Now when I open the drawing it is still in the block edit screen and I cant get out of it.
View 9 Replies View RelatedIt has happened repeatedly, but on different occasions, that the close file X that should be in the top right position of the drawing has vanished. In other drawings that are open at the same time the X in present...Switching between drawings often brings the X back, but this is a weird bug that was not present before the 2012 release.
win 7 IV 2012 suite + Vault
I used refedit to freeze a couple of items that were nested. My drawing file/machine locked up when I attemped to freeze them. I had to reboot, when I opened the file again I was still stuck in refedit mode. I cannot use refclose to get out our that command. It wants me to use refedit again. I need to get back to my work.
View 4 Replies View RelatedI'm just wondering if there is a shortcut command for the 'export' dialogue box?
The only information I seem to be bringing up in searches is 'exporting your shortcuts' to create custom shortcut keys.