I'm just wondering if there is a shortcut command for the 'export' dialogue box?
The only information I seem to be bringing up in searches is 'exporting your shortcuts' to create custom shortcut keys.
When I use 'kAISaveDocumentAsAction' to play action event, the pdf option dialog shows up, as in the following piece of code:
result = sAIActionManager->AIActionSetString( valueParameterBlock, kAISaveDocumentAsNameKey, szPDFullFileName );
//file format
result = sAIActionManager->AIActionSetString( valueParameterBlock, kAISaveDocumentAsFormatKey, kAIPDFFileFormat);
//file extension
result = sAIActionManager->AIActionSetString( valueParameterBlock, kAISaveDocumentAsExtensionKey, kAIPDFFileFormatExtension );
//show pdf option dialog
result = sAIActionManager->AIActionSetInteger( valueParameterBlock, kAISaveDocumentAsGetParamsKey, 1);
//play event
result = sAIActionManager->PlayActionEvent( kAISaveDocumentAsAction, kDialogOff, valueParameterBlock);
[code]....
I want to use the kAISaveDocumentACopyAsAction option and want the pdf option dialog to show.
When I use the shortcut in CS 6 "shift + delete" the dialog box does not show up the selection actually disappears. Where to find the content dialog box without the shortcut.
View 3 Replies View RelatedShortcut bar look like this? Any way to change either the background color or the color of the text?
White on light gray does not provide the best contrast.
When i type O for offset Command its not working its shows following error, i have attached the screen sort.
then i write full command "Offset" its working, like this many shortcut command are not working (Array, Reactangle, Fillet etc.)
is it possible to switch on all layouts by one command (shortcut)?
View 5 Replies View Relatedhow to create a Shortcut key "Alt + c" for "File - close" command? I like the same seeting as my Inventor seeting, and the Inventor is so easy to setup my Shortcut keys use "Tools-Customise-Keyboard".
View 9 Replies View Relatedknow if the shortcut command 'LAYOFF' can be edited. Edited to something shorter.
If so, were is this located to do so.
I want to know how to change subcommand shortcut
When I do a Polyline, after i done an arc section, I would like to be able to press "F" instead of "L" to do a line section...
Is there an easy way to do that or do I have to reprogram a new Polyline command in lisp with the subcommand shortcut that I would like? (would prefer to avoid it as sometime I have to work on LT)
The reason behind all of this is that I remapped all my command to keys that are on the left side of the keyboard ... it work really well and I almost never have to lift my left hand except for the case with the polyline... the L key is miles away ..
Right now I remapped a button on my mouse to "L" but its not as natural as just using the keyboard.
Is there any way to turn on a command dialog box for Revit architecture 2012?Whenever I try to perform any knd of command from the "ribbon bar", I don't know the status of the command until I ht cancel and see what the command may or may not have done.
I noticed that, whenever I enter a command (such as "place a component"), I have to hit "cancel" TWICE to get out of it. Seems strange; I would expect to see an "end" command, instead of "cancel" (which implies exiting without doing anything). Or maybe I'm just going nuts trying to learn Revit.
How do you change/edit command shortcut keys? For example, I would like to change the keyboard shortcut key for the command COPY to "C" instead of "CO" and CIRCLE to "CR" instead of "C" because I use the COPY command much more than CIRCLE and I'd like to maximize my drafting efficiency. In older versions of AutoCAD, you could open the acad pgp file and edit the info using "wordpad"; however, I have not been able to find that same file for this 2011 version.
My system is:
Gateway AMD Phenom II X4 820 quad-core processor 3 GHz
Windows 7 Professional 64-bit os
ATI Radeon HD 4250 graphics
640 GB hard drive
6 GB DDR3 memory
How do I bring up a dialog box with the insert command? after I type 'insert' it asks me in the command line what the name of the block is. I would like to bring up the dialog box so that I can browse to my block library etc.
View 9 Replies View RelatedWhat happened to the dialog box for the array command in Map 3D 2012
View 2 Replies View RelatedI have a problem where autocad will hang for almost 1 minute if I type in a misspelled command shortcut or misspelled command. For example if I try to type in "line" and I type in "linr" it will hang up for around 50 seconds. Is there a setting, system variable or key in the registry to stop autocad from looking for a command/shortcut that doesn't exist?
View 6 Replies View RelatedI want to know how to change subcommand shortcut
When I do a Polyline, after i done an arc section, I would like to be able to press "F" instead of "L" to do a line section...
Is there an easy way to do that or do I have to reprogram a new Polyline command in lisp with the subcommand shortcut that I would like? (would prefer to avoid it as sometime I have to work on LT)
The reason behind all of this is that I remapped all my command to keys that are on the left side of the keyboard ... it work really well and I almost never have to lift my left hand except for the case with the polyline... the L key is miles away ...
Right now I remapped a button on my mouse to "L" but its not as natural as just using the keyboard...
How do I turn on the dialog box "on" for the array command?
View 2 Replies View RelatedI am having an issue when I use the "Place in Photoshop" command from within Bridge CC, it is skipping the Camera Raw Dialog box and not behaving like a normal smart object. This has been my workflow for years and suddenly it's not working in CC.
View 1 Replies View RelatedI am unable to get this code to launch the File Save As Command. I Think I have the sytax correct, because if I Replace "AppFileSaveAsCmd" with a different command name (i.e. "AppFileNewCmd") it works as expected. I have tried this with "AppFileSaveCmd" and "AppFileSaveCopyAsCmd" and both have also failed. It seems any kind of save command wont work... I am trying to creat a rule that will fire on "New Document" iTrigger that will Force a user to save the newly created assembly document in preperation for further iLogic rules that depent on the assembly Filename and path. Maybe there I am not telling it What file to Save? I have pasted the code below..
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 3048 StartFragment: 314 EndFragment: 3016 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
[Code]....
How to create shortcut for Revit Schedule export. We have attached a snap for youre rerefence. We have created the shortcut but not work .
View 7 Replies View RelatedLand Desktop 2009 Civil 3D Companion
When I issue the Wblock Command I can not find the Dialog box to select objects and file location... This happens in the Layer Dialog when I try to change the color of a layer, the Color Dialog box can not be found. When I use the Block command the dialog box pops up, so I can see it.
fildia>1
cmddia>1
attdia>0
I don't know why, but lately, I don't have any options available when I go to export an image. Once I click "Export" from the file dialog box, all I get is this three-button Help/Export/Cancel dialog, and I can't specify any options relevant to the export format.
View 6 Replies View RelatedWhen i am clicking rmb and choose edit in cs6 there is no export dialog like i had before ( export with lightroom settings, copy or original). My cr2 opening in cs without changes i made in LR ?
View 4 Replies View RelatedWhat happened to the stacking optons n the export dialog when adding the exports back into the catalog? After watching Jared Platt's creativelive course, I started creating my PSD's by exporting them in bulk, adding them back into the catalog and stacking them on top of the original raw files. After updating to LR 4.2 I don't see the option in the export dialog any more.
View 11 Replies View RelatedTransitioning to CD X6 while try to get work done is a chore. I just loaded the real CD X6 box version. It deleted the downloaded test version. But now I made a new poster and I am using Ctrl-E to export it and there is no Export Dialog box. It just saves the JPG in what it thinks I need!! How do I get the Export Dialog box back to control the parameters of my Export?
View 1 Replies View RelatedWe have CorelDRAW Graphics Suite X5 installed on a Windows XP SP3 32-bit machine and when attempting to export a CorelDRAW file to anything (i.e. JPG), the applications crashes after the export dialog box opens. This happens for any file we try to export.
We have reset the workspace using F8, but it did not resolve the issue.
Exporting the same file in CorelDRAW X4 or even X3 works perfectly, this is only an issue with X5.
I lost my dialog boxes for SAVEAS and EXPORT. I tried the CMDDIA system variable but had no luck. I can't stand having to type in full paths for files that I'm trying to save.
I would imagine that alot of my other dialog boxes default back to command line as well.
Is there anyway to call activedoc.saveas as method with the save copy as boolean variable set to true and have it not display the export DWG dialog box? Without using the translators in code, or do we have to use that if we want to use savecopyas = true and bypass the dialog?
We save all our inventor files to .dwg's and I just want to loop through a file a bunch of times, change some properties and save it out to a new location. Doing just a save as, makes a mess of things and I would like to use the SaveCopyAs feature but don't know how to get the dialog to not show up.
This is in part of a vb.net addin using inventor 2013.
I am exporting graphics to TIF format and it needs to be exact same as in document, RGB code. I found out that if I uncheck the "Embed Color profile" it exports correctly with exact color codes as in Corel. However, sometimes I have found out that I have forgotten to uncheck that little box..
So I would prefer to have it unchecked by default. How would I do it?
I opened filters.ini and found the TIFF section, but I don't really understand anything there.
I've been attempting to export geometry (which I believe is in the proper format) out of AutoCAD 2013 to the .iges (or .igs) solid body model format with no luck. I found the instructions in the AutoCAD documentation but when I try and execute, no luck. I do get the mandatory "1 object found that "fits the file type format requirements" dialogue so again I'm pretty sure that I'm doing things correctly.
Do I need a special plug-in? Here is the info on this type of export: Click Output tabSend panelExport.In the IGES Export Data dialog box, in the Files of type box, select IGES (*.igs, *.iges).In the File Name box, specify the name of the IGES file.Click Save.Select the objects to export and press ENTER to begin the export process.When export is finished, a notification bubble is displayed.
I don't even get the IGES Export Data dialog box to show up..
it's possible to have a standard text filled in the "Authorization" and "Organization", so that I don't have to enter the same text each time I want to export a STEP file.
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
I recently upgraded to Civil 3D 2011 from C3D2010. I have used the same ACAD.PGP file for years that includes the shortcut C for the COPY command. Up until C3D2011 this would always allow me to copy an entity multiple times, (the default when COPYMODE is set to 0).
I am running C3D2011 64bit on WIN 7 64bit OS. It happens with other commands too that use a dialog box normally, i.e. INSERT - it only brings up the command line version of it.
