What happened to the option/enter command in the move object dialog that has been around since the early days of Illustrator??? Instead of having to mouse click the "copy" button in the move object window, one could just hold down option with Return or Enter and the Copy command would happen rather than a simple move. Immensely useful for prepress work!
While exporting the document as jpeg, through File->Export, there is an option "Embed ICC Profile" as figure shows.
How to set it if I am exporting the document through my program in which I rasterize the document and used the sAIImage->AsJPEG(raster, jpegDataFilter, params); I didn't find any option in AIRasterizeSettings or AIImageOptJPEGParams to set this flag.
I'v seen for exporting a path to illustrator, they mention the File>Export>Export Paths to Illustrator option. When I look under "Export", the only options I get are:
Data sets as files... Render Video... Zoomify
I can still drag/cut/paste the path into Illustrator, so I haven't been stopped, but why the export option isn't showing up?
For the image dialog box, it will not allow me to choose pixels, even though my document is a pixel sized document. I tried going to the Units & Increments settings, but nothing there changed it.
I cannot stand it when I make a new layer in Illustrator and the color hint becomes yellow. This usually happens on the third new layer into every project. I can go in and manually change it from yellow to the ten plus other colors, but I just want yellow completely out of the list. It's awful to look at, and I think every other color is easier.
We are trying to use the "Underline top line" option located in the Content tab of the Modify MultiLeader Style dialog in AutoCAD 2012 (See attachment).
The minor issue we have is that there seems to be no way to adjust the gap between the text and the "underline". In regular dimensions, there is a dimvar called DIMGAP that controls this distance. Is there any way to control the distance between the top line MText and the "underline"?
I don't know why, but lately, I don't have any options available when I go to export an image. Once I click "Export" from the file dialog box, all I get is this three-button Help/Export/Cancel dialog, and I can't specify any options relevant to the export format.
When i am clicking rmb and choose edit in cs6 there is no export dialog like i had before ( export with lightroom settings, copy or original). My cr2 opening in cs without changes i made in LR ?
What happened to the stacking optons n the export dialog when adding the exports back into the catalog? After watching Jared Platt's creativelive course, I started creating my PSD's by exporting them in bulk, adding them back into the catalog and stacking them on top of the original raw files. After updating to LR 4.2 I don't see the option in the export dialog any more.
Where else do they keep this setting? I only have found it in Active Layout in extended dada
(entget (vlax-vla-object->ename(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object)))) '("*")) The last pice of extended data is: ("PLOTTRANSPARENCY" (1071 . 0)) When i change it to 1 (setq layout(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object)))) (vla-getXdata layout "PLOTTRANSPARENCY" 'type 'data) (vlax-safearray-fill data '("PLOTTRANSPARENCY" 1)) (vla-setXdata layout type data)
it stays there (extended data), but the setting in Plot dialog box doesn't change!!! And it still prints no transparency.
It takes to save the drawing and reopen it again to see the change.
The command -PLOT does not have this setting as well, so my options back to VBA or Lisp, but HOW?
I used to have the option for "Use Adobe Dialog" in all the CS2 programs, but I didn't really use it that often. Now that I've just reinstalled Windows and gotten everything set up again, I was wanting to use it again, but now the option is no longer there in the Open dialog.
Transitioning to CD X6 while try to get work done is a chore. I just loaded the real CD X6 box version. It deleted the downloaded test version. But now I made a new poster and I am using Ctrl-E to export it and there is no Export Dialog box. It just saves the JPG in what it thinks I need!! How do I get the Export Dialog box back to control the parameters of my Export?
We have CorelDRAW Graphics Suite X5 installed on a Windows XP SP3 32-bit machine and when attempting to export a CorelDRAW file to anything (i.e. JPG), the applications crashes after the export dialog box opens. This happens for any file we try to export.
We have reset the workspace using F8, but it did not resolve the issue.
Exporting the same file in CorelDRAW X4 or even X3 works perfectly, this is only an issue with X5.
I lost my dialog boxes for SAVEAS and EXPORT. I tried the CMDDIA system variable but had no luck. I can't stand having to type in full paths for files that I'm trying to save.
I would imagine that alot of my other dialog boxes default back to command line as well.
Is there anyway to call activedoc.saveas as method with the save copy as boolean variable set to true and have it not display the export DWG dialog box? Without using the translators in code, or do we have to use that if we want to use savecopyas = true and bypass the dialog?
We save all our inventor files to .dwg's and I just want to loop through a file a bunch of times, change some properties and save it out to a new location. Doing just a save as, makes a mess of things and I would like to use the SaveCopyAs feature but don't know how to get the dialog to not show up.
This is in part of a vb.net addin using inventor 2013.
how to fix an audio issue with exporting video from Photoshop.I am choosing the quick time format however the option for sound is always grayed out. from the animation panel I have the audio enabled and I can hear it when I play back from within Photoshop.
I am using Photoshop CS4 extended on PC Windows 7.I understand the following -
-For audio I need to choose Quicktime format -Photoshop is primarily image editing software (with video capabilities)
I am having trouble with the image sizing feature of Lightroom 4.3. In working with a batch of RAW files that I am exporting as JPEGS, I want to resize some down to a smaller size yet I do not want to make the images that are already smaller than my target dimension larger, I find that Lightroom resizes everything to the dimensions I have specified. This happens even when I check the “Do Not Enlarge” box. For example, if I am exporting 100 images in a photo set of which 90 images are 5555 pixels on the long end and 10 images are 3333 pixels on the long end and I specify that I want to resize to a dimension of 4444 px, Lightroom will resize all 100 images to 4444 px, even when I have checked the “Do Not Enlarge box”. What I want Lightroom to do is resize the 5555 px images to 4444 px, but export the smaller images in their original 3333 pixel size. I thought by checking “Do Not Enlarge” the files smaller than my resize dimension, would remain smaller. However, I have recently noticed that all the images are being resized, even the smaller ones despite me checking “Do Not Enlarge”.
Just updated my LR to 5.3 from the CC and noticed a weird problem that I never encountered before in LR4 or 5.x (before 5.3 that is). I usually export pictures from RAW format to either TIFF or JPG (100% quality) and depending on purpose I use batch resizing, e.g. 1080 pixels on short edge ... well that whole Resize setting gets ignored by LR 5.3! It still exports full size (full RAW size in this case) into JPG or TIFF, but it won't resize .
EDIT: I found out that I checked the "Don't enlarge" box in Export dialog under Resizing, that's when resizing was not working. After I unchecked it then it works fine, but still what does that have to do with anything if we are talking about downsampling images from 5184x3456 pixels to 1620x1080 ...
I have a friend who is just completing a film for a public screening...(about 400 people, mostly volunteers involved in production.)He will be using a regular projector hooked up to a PC to play the video.The source footage is 1080p HD shot on a HVX200. Edited on Premiere Pro CS5.
What format should he use to export so he gets great quality but it can also play without the computer stuttering and dying etc? We've debated between H.264 (mpeg 4 file format) or DVD Blu Ray.MPEG 2 (or some Quicktime format?)
Do we choose h.264 and bump up the bitrate to maximum? Stick with the preset recommendation? There also is h.'264 bluray'..have no idea what difference that makes.
We're not experts on codecs and resolutions etc.Premiere Pro presents this plethora of options.
We want to choose....File ...Export....a format and preset (and maybe adjust a setting or two) and get the best result.
I am exporting graphics to TIF format and it needs to be exact same as in document, RGB code. I found out that if I uncheck the "Embed Color profile" it exports correctly with exact color codes as in Corel. However, sometimes I have found out that I have forgotten to uncheck that little box..
So I would prefer to have it unchecked by default. How would I do it?
I opened filters.ini and found the TIFF section, but I don't really understand anything there.
I've been attempting to export geometry (which I believe is in the proper format) out of AutoCAD 2013 to the .iges (or .igs) solid body model format with no luck. I found the instructions in the AutoCAD documentation but when I try and execute, no luck. I do get the mandatory "1 object found that "fits the file type format requirements" dialogue so again I'm pretty sure that I'm doing things correctly.
Do I need a special plug-in? Here is the info on this type of export: Click Output tabSend panelExport.In the IGES Export Data dialog box, in the Files of type box, select IGES (*.igs, *.iges).In the File Name box, specify the name of the IGES file.Click Save.Select the objects to export and press ENTER to begin the export process.When export is finished, a notification bubble is displayed.
I don't even get the IGES Export Data dialog box to show up..
I'm trying to export 3D models from AutoCAD 2011 to AutoMod Simulation software. However, every different export filetype that I try does not allow me to bring the model into AutoMod and still have the colors that the model had in AutoCAD. For example, If I create a car and it has several colors for the metal, the wheels, and the windshield, it brings it over as a single block, all in red. I'm not sure how to fix this. In the old models, I used to use 3DSOUT command, but that doesn't look like an option any longer.
Just downloaded and installed this pack as was keen to see the Export Civil 3D drawing functionality but can't see any great advantages over the standard Export to AutoCAD option.
In fact in the drawing I tried all the surfaces were ignored whereas they were exploded to 3D faces in the standard Export optionAre there, in fact, any advantages to using the Productivity pack version of the Export to Autocad routine?
This is such a common task, there may be cause to have a Resize option bundled with the Export command. Having to always perform them as two separate steps is an annoyance, but the possibility of accidentally saving the wrong resolution back to the XCF file is a danger.
A question that asked late last year as I had a need to resize and keep working on original. That's when I found the save for web had been reinstated as 2.6.
Part of the motivation for the save/export distinction in the firstplace is later being able to introduce such improvements to exportworkflows (as well as other neat things; like being able to choosebetween export presets, multiple named regions - and more). Without aclear conceptual internal seperation - such future improvements willbe much harder.
Would it be possible to automatically set the name of the folder in the "put in subfolder" export option, based on that image metadata (or on a preset, as it is, for example, for filenames)? Maybe a plugin? - image in "summer 2013" gets exported in "summer 2013 jpg" subfolder, where "summer 2013" is taken from the "folder" metadata and "jpg" either from the filetype or manually added.
I am trying to add alt tags to objects in an InDesign CS5 project. The guidance I can find tells me to go to Object > Object Export Options.The problem I have is, there is no Object Export Options option available..
