AutoCAD Civil 3D :: 3D Faces In Standard Export Option

Nov 25, 2013

Just downloaded and installed this pack as was keen to see the Export Civil 3D drawing functionality but can't see any great advantages over the standard Export to AutoCAD option.

In fact in the drawing I tried all the surfaces were ignored whereas they were exploded to 3D faces in the standard Export optionAre there, in fact, any advantages to using the Productivity pack version of the Export to Autocad routine?

View 4 Replies


Photoshop :: Is 3D Text Not An Option In CS6 Standard

Jul 7, 2012

Is 3D text not an option in CS6 Standard?  It doesn't show up under the Type tab as shown in the Lynda tutorials.  The tutorial does not state whether it is Standard or Extended edition.

View 2 Replies View Related

Photoshop :: Upgrade From 5 To 6 In Standard Mode To Get CS6 With 3D Option?

Apr 23, 2012

Is it possible when upgrading from 5 to 6, in 'Standard' mode, to get PS CS6 with 3-D option?I don't need all the bells & whistles that come with Premium.

View 8 Replies View Related

AutoCAD Inventor :: Combine Faces Of Flat Pattern To Export As DXF?

Jul 12, 2013

I have created some curved straightening vanes to go inside a large square duct 90 degree elbow. Each vane starts with a 6" long straight section the its follows a fixed radius through 90 degrees. When I "unfold" the part the resulting face becomes two separate faces. When i right click to export as dxf i can only export one face or the other. How can I combine this into a single face to export?

View 4 Replies View Related

AutoCAD Inventor :: Standard Text In Fields In STEP Export Dialog

Jun 13, 2012

it's possible to have a standard text filled in the "Authorization" and "Organization", so that I don't have to enter the same text each time I want to export a STEP file.

Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
Nvidia Quadro 4000
Windows 7 Professional (64bit)

View 6 Replies View Related

AutoCAD Inventor :: Splitting Curved Faces Into Two Faces?

Jan 11, 2013

i got Inventor recently, and i've been working on a model of a longboard just to teach myself how to use the tools in Inventor. right now i'm trying to color areas for the griptape pattern so i drew the 2D pattern and projected it onto the 3D model of the longboard. but when i tried to split the faces of the model along the projected pattern only a few of the projected lines split the faces. for other faces i kept getting these errors: 

Create parting line failed Crane.ipt: Errors occurred during update Split11: Could not build this Split The attempted operation did not produce a meaningful result. Try with different inputs.

View 1 Replies View Related

AutoCAD Civil 3D :: Extract 3D Faces From Surfaces?

Sep 18, 2012

I am looking for a better way to get my 3D Faces from a surface into a DXF. Note: I need to have 3D Faces in a DXF as it is the only way my data collector will accept them. My current process is 1)export surface to a XML 2) open new drawing and import XML 3)make the surface style only display triangles 4)extract triangles from surface 5)change my surface style to no display 6)save drawing as a DXF. I don't like to extract the triangles from the original drawing because I am often making adjustments to the surface and then the old extracted triangles and still hanging around in the drawing. I don't want that. Looking to see if it would be possible to record a macro(or some other automated procedure) that would allow me to extract triangles as save them in a new DXF from a selected surface all in one step.

Civil 3D 2014
i7-3930K Overclocked
32 GB Ram
Windows 7 Professional

View 7 Replies View Related

AutoCAD Civil 3D :: Extrude Preview (Series Of 3D Faces)

May 6, 2013

I'm trying to extrude a series of 3D faces, a very large series, over 200,000 3D faces. I´ve done this before only it was not on so many faces as I can select only like 3,000 faces aprox at any one time or the computer crashes.

I think this problem could be solved, or at least I could save some time, if the extruding preview could be turned off. By extruding preview I mean that when I enter the extrude command and select the objects to extrude, then immediatly there's a preview of what the objects would look like once they're extruded and that's what's causing the delay and the crashes.

Is there any way this could be turned off?

I've attached an image.

View 5 Replies View Related

AutoCAD Civil 3D :: Volume Calculation For Faces Object?

Jan 9, 2013

I have a volume in my CAD file described by 3D Faces. Is there anyway to know what is the volume of this volume -that represents an open pit-?

Every time that I do a volume I do by the comparison of 2 surfaces but this is not the case now.

View 6 Replies View Related

AutoCAD Civil 3D :: Lisp / Net Routine For Converting 3D Polylines To 3D Faces

Apr 2, 2013

Any program or routine in lisp or net that can select a group of 3d polylines in the form of a tin and convert them all to 3d faces?

I know that I can take the 3d polylines and explode them to 3d lines.   Then I can use map clean to delete the duplicate lines.   Then I can create a C3D surface using the 3d lines.   Then I can extract 3d faces from the surface.  

View 9 Replies View Related

AutoCAD 2010 :: Any Option To Export 3D Graphic To AutoMOD?

May 4, 2012

I'm trying to export 3D models from AutoCAD 2011 to AutoMod Simulation software. However, every different export filetype that I try does not allow me to bring the model into AutoMod and still have the colors that the model had in AutoCAD. For example, If I create a car and it has several colors for the metal, the wheels, and the windshield, it brings it over as a single block, all in red. I'm not sure how to fix this. In the old models, I used to use 3DSOUT command, but that doesn't look like an option any longer.

View 3 Replies View Related

AutoCAD Civil 3D :: Building Standard Tool Palette

Apr 26, 2013

I've got a tool palette that I use which has about 5 or so tabs with about 10 to 50 standard blocks, tables, etc in each tab that is organized by text headers and dividers. It's such a productivity booster I exported the palette to a place on our server that everyone can import them from. My problem is that when they import the tool palettes, the icon images dont come in. We're left with manually updating all the images which is a problem when certain people "don't like change" and don't want to take the time to deal with the technical problems. Maybe I'm missing something, but shouldnt the images come in when you import the palettes?
Andrew Ingram

Civil 3D x64 2012
Win 7 x64 Ultimate
I7 3820 (3.6ghz quad core with HT)
32gig RAM (Corsair XMS3 4x8g)
Intel x z79 mobo (BOXDX79TO 2011 socket)
Radeon HD 7850 2gb GDDR5

View 3 Replies View Related

AutoCAD Civil 3D :: QTO Implementation - WSDOT Standard Items?

Jan 16, 2013

setup QTO Pay Item files for the WSDOT Standard items?

View 9 Replies View Related

AutoCAD Civil 3D :: Annotation And Standard Scale Of Viewport

Jan 22, 2013

The properties palatte has both these scales listed.  In theory, they can be different.I would love to be able to plot my drawing at 1:1000 with the civil objects & labels scaled to 1:500 so they don't overwhelm the plan.  It would seem I should be able to simply set the viewport to have a standard scale of 1:1000 and annotation scale 1:500 and be done.  But it doesn't work.  It will always scale the annotative objects to the standard scale.

My workaround is to scale my sheet double size and plot it half size, to trick the Civil objects & labels.

View 2 Replies View Related

AutoCAD Civil 3D :: Prevent 3D Faces Objects When Exploding An Alignment Tangent Label

Nov 8, 2013

I received a drawing where I have to add Bearings to an alignment and Right-of-Way lines. I have a Line Label Style that it works for that purpose. These new bearings are "Alignment Tangent Labels" and we need them to be "MTexts"

Select & explode once, and you get "Block Reference"

Select & explode again, and you get "MText"

Once that is done, unfortunatly, I get "3D Faces" objects in the background. Invisible on the drawing, but visible on paper once we plot them. The only way to remove them is by selecting around the new MText until I click on one, then, right-click, Select simnilar, Delete!

Is there any way to prevent that to speed up the process???

View 1 Replies View Related

AutoCAD Civil 3D :: Hydraflow Import Changes All Parts To Standard Style?

Jun 19, 2013

one would think that you could just export the .stm file into hydraflow, make some changes, and import, and all would be fine.  when i export, all of the structures in hydraflow come up as drop curb.  how can they come in as what they actually are.. aka, when the part i use is a 2x4 box, it should come into hydraflow as a "grate inlet", or a st-mh will come in as a "manhole".

and then likewise, when the changes are made, and its brought back into autocad, they all come in as a "standard" style.  except the outfalls, which show as a "standard" style, but come in with a different block, and get a whole new label (outfal - x)

View 3 Replies View Related

AutoCAD Civil 3D :: Library For Pipe Network Parts For Items Such As Standard Type

Jan 22, 2013

I was wondering if there exists a library for pipe network parts for items such as a standard type 1 catch basin that I can add to the existing autocad pipe network parts library. Basically I'm trying to find a shortcut so that I don't have to build all of the catch basins that I need.

View 3 Replies View Related

Lightroom :: Select A Profile Like Camera Standard Instead Of Adobe Standard?

Dec 6, 2012

Why would I want to select a Profile like Camera Standard instead of Adobe Standard?

View 10 Replies View Related

Illustrator SDK :: Export PDF With Option Dialog

Feb 22, 2012

When I use 'kAISaveDocumentAsAction' to play action event, the pdf option dialog shows up, as in the following piece of code:
result = sAIActionManager->AIActionSetString( valueParameterBlock, kAISaveDocumentAsNameKey, szPDFullFileName );
//file format
result = sAIActionManager->AIActionSetString( valueParameterBlock, kAISaveDocumentAsFormatKey, kAIPDFFileFormat);
//file extension
result = sAIActionManager->AIActionSetString( valueParameterBlock, kAISaveDocumentAsExtensionKey, kAIPDFFileFormatExtension );
//show pdf option dialog
result = sAIActionManager->AIActionSetInteger( valueParameterBlock, kAISaveDocumentAsGetParamsKey, 1);
//play event
result = sAIActionManager->PlayActionEvent( kAISaveDocumentAsAction, kDialogOff, valueParameterBlock);

I want to use the kAISaveDocumentACopyAsAction option and want the pdf option dialog to show.

View 1 Replies View Related

Photoshop :: Export Video File As AVI - CC Option?

Aug 9, 2013

In CS5 I could export my video files as AVI. Where can I find this option in CC?

View 10 Replies View Related

Photoshop :: Export Video But No Option For Sound

Nov 11, 2012

how to fix an audio issue with exporting video from Photoshop.I am choosing the quick time format however the option for sound is always grayed out.  from the animation panel I have the audio enabled and I can hear it when I play back from within Photoshop.
I am using Photoshop CS4 extended on PC Windows 7.I understand the following -
-For audio I need to choose Quicktime format
-Photoshop is primarily image editing software (with video capabilities)

View 3 Replies View Related

Lightroom :: Don't Enlarge Option In Export Not Working

Mar 11, 2013

I am having trouble with the image sizing feature of Lightroom 4.3. In working with a batch of RAW files that I am exporting as JPEGS, I want to resize some down to a smaller size yet I do not want to make the images that are already smaller than my target dimension larger, I find that Lightroom resizes everything to the dimensions I have specified. This happens even when I check the “Do Not Enlarge” box. For example, if I am exporting 100 images in a photo set of which 90 images are 5555 pixels on the long end and 10 images are 3333 pixels on the long end and I specify that I want to resize to a dimension of 4444 px, Lightroom will resize all 100 images to 4444 px, even when I have checked the “Do Not Enlarge box”. What I want Lightroom to do is resize the 5555 px images to 4444 px, but export the smaller images in their original 3333 pixel size. I thought by checking “Do Not Enlarge” the files smaller than my resize dimension, would remain smaller. However, I have recently noticed that all the images are being resized, even the smaller ones despite me checking “Do Not Enlarge”.

View 3 Replies View Related

Lightroom :: 5.3 Export With Resize Option Not Resizing?

Dec 17, 2013

Just updated my LR to 5.3 from the CC and noticed a weird problem that I never encountered before in LR4 or 5.x (before 5.3 that is). I usually export pictures from RAW format to either TIFF or JPG (100% quality) and depending on purpose I use batch resizing, e.g. 1080 pixels on short edge ... well that whole Resize setting gets ignored by LR 5.3! It still exports full size (full RAW size in this case) into JPG or TIFF, but it won't resize .
I found out that I checked the "Don't enlarge" box in Export dialog under Resizing, that's when resizing was not working. After I unchecked it then it works fine, but still what does that have to do with anything if we are talking about downsampling images from 5184x3456 pixels to 1620x1080 ...

View 1 Replies View Related

Lightroom :: 4.3 - Can't Find Option To Export To PNG Format?

Jan 14, 2013

I can't find an option to export to PNG format in LR 4.3.

View 1 Replies View Related

Premiere Pro :: Best Export Option For Film PC Playback?

Feb 12, 2014

I have a friend who is just completing a film for a public screening...(about 400 people, mostly volunteers involved in production.)He will be using a regular projector hooked up to a PC to play the video.The source footage is 1080p HD shot on a HVX200. Edited on Premiere Pro CS5.
What format should he use to export so he gets great quality but it can also play without the computer stuttering and dying etc? We've debated between H.264 (mpeg 4 file format) or DVD Blu Ray.MPEG 2 (or some Quicktime format?)
Do we choose h.264 and bump up the bitrate to maximum? Stick with the preset recommendation? There also is h.'264 bluray'..have no idea what difference that makes.
We're not experts on codecs and resolutions etc.Premiere Pro presents this plethora of options.
We want to choose....File ...Export....a format and preset (and maybe adjust a setting or two) and get the best result.

View 2 Replies View Related

GIMP :: Resize Option Bundled With Export Command

Jan 13, 2014

This is such a common task, there may be cause to have a Resize option bundled with the Export command. Having to always perform them as two separate steps is an annoyance, but the possibility of accidentally saving the wrong resolution back to the XCF file is a danger.

A question that asked late last year as I had a need to resize and keep working on original. That's when I found the save for web had been reinstated as 2.6.

Part of the motivation for the save/export distinction in the firstplace is later being able to introduce such improvements to exportworkflows (as well as other neat things; like being able to choosebetween export presets, multiple named regions - and more). Without aclear conceptual internal seperation - such future improvements willbe much harder.

View 2 Replies View Related

Lightroom :: Use Image Metadata For (put In Subfolder) Export Option

Nov 6, 2013

Would it be possible to automatically set the name of the folder in the "put in subfolder" export option, based on that image metadata (or on a preset, as it is, for example, for filenames)? Maybe a plugin? - image in "summer 2013" gets exported in "summer 2013 jpg" subfolder, where "summer 2013" is taken from the "folder" metadata and "jpg" either from the filetype or manually added.

View 1 Replies View Related

InDesign :: Missing Object Export Options Option CS5

Apr 8, 2014

I am trying to add alt tags to objects in an InDesign CS5 project. The guidance I can find tells me to go to Object > Object Export Options.The problem I have is, there is no Object Export Options option available..

View 4 Replies View Related

3ds Max :: Convert A Cone (standard) To A Sphere (standard)?

Nov 3, 2011

I want to convert a cone (standard) to a sphere (standard), how do i do it?

View 5 Replies View Related

Illustrator SDK :: How To Set Embed Icc Profile Option To Export Document As JPEG

Jun 3, 2011

While exporting the document as jpeg, through File->Export, there is an option "Embed ICC Profile" as figure shows.

How to set it if I am exporting the document through my program in which I rasterize the document and used  the sAIImage->AsJPEG(raster, jpegDataFilter, params); I didn't find any option in AIRasterizeSettings or AIImageOptJPEGParams to set this flag.

View 9 Replies View Related

Photoshop :: Exporting Paths To Illustrator Option Shows Up Under File - Export

Feb 24, 2012

I'v seen for exporting a path to illustrator, they mention the File>Export>Export Paths to Illustrator option.  When I look under "Export", the only options I get are:
Data sets as files...
Render Video...
I can still drag/cut/paste the path into Illustrator, so I haven't been stopped, but why the export option isn't showing up?

View 3 Replies View Related

Copyrights 2005-15, All rights reserved