When I use the move command to, let's say, to move a floor plan (drag to new location on the page), some of the lines in the "moved" floor plan are either skewed or missing. I'm able to "cut and paste" as welll as "copy with basepoint" w/out problem.
See attachment below.
How might I correct this problem?
I just got AUTOCAD 2013 and I have problem using MOVE command. With my previous version AUTOCAD I was able to move one by one every line from the object I created. Now with the new version when I use MOVE command, not only one line is moved, it is moved the whole object (Like the object is a block, but is not).
How can I move only one single object from my drawing?
HOW DO YOU TURN THIS OFF????!!!!!!!
If you select an object and then drag it, it moves. This is without initiating the MOVE command and without picking any grips.
I used the "break" command to split some lines into segments, but now I can not join them again using PEDIT. They are all on the same elevation. What is preventing me from joining them? I've attached the file in question, I'm trying to join the red (metal layer) lines.
View 3 Replies View Relatedhow to create a Shortcut key "Alt + c" for "File - close" command? I like the same seeting as my Inventor seeting, and the Inventor is so easy to setup my Shortcut keys use "Tools-Customise-Keyboard".
View 9 Replies View Related“Command” and “Option” settings in the AutoCAD...Is there a way to save the “Command settings” and the “Option settings” in the file but not on the “AutoCAD program”?
Examples:
The default of the “Isolate” command is “Lock and fade” For me I prefer to switch the this setting to be “Off”The default value of the command “FIELDEVAL” is 13. For me I prefer to switch the this setting to be “Off”The default setting of the “default mode” is “shortcut menu”. For me I prefer to switch this setting to be “repeat last command” ( I go to options>>user preferences”>>Windows standard behavior>>Right click customization>> default mode>>repeat last command. Is there a way to save these settings on the file such that if we open this file in another computer then we don't need to set them again?
In other words, why aren't the “Default settings” “Option settings” saved on the file the same way the “Drafting Settings: like sanps, Osanps” are?
I would like to save my opened dxf drawing again as dxf with one click by custom button.
I was trying the next code
^C^Cdxfout;;y;v;2004;16;;
It returns the message "Can't open file", it seems like it does the save only when initial file is dwg.
The goal I wish I click a custom button and will save my opened dxf drawing back to dxf in 2004 format.
When I copy or move an object in a file converted from Microstation to Autocad 2012 the system freezes or slows down to a crawl. If I redraw the drawing in Autocad it works fine. I have a lot of drawings converted from Microstation and I don't need to be redrawing them all.
View 1 Replies View RelatedDoes the command still exist to export a drawing to the 3DS file type? I remember doing it in 2007, but do not remember the command and can not find it in the help files.
View 9 Replies View RelatedI want to add an attribute to a BLK file I have from a past release. Using this .BLK file, I can create a table from attributes in my drawing using a LISP routine.
It seems there is no way to create or edit a .BLK file that I can use for this in ACAD 2011, it only creates .DXE files.
The problem with the .DXE file is that is saves the drawing that the original extraction is performed on. When I use the .DXE in another drawing, it uses the original drawing data unless I manually "delete" the old drawing reference using the dialog box in the extraction wizard.
The .BLK file works perfectly, but I want to add an attribute. How can I create a new, or edit my old .BLK file?
Will I have to reinstall an older version of AutoCAd to accomplish this?
I wrote some LISP programs. I would like to use the output data generated by LISP program in Command arear of AutoCAD. I Heard we can dave the output data into .dat files.
View 9 Replies View RelatedThis has happened on all versions of AutoCAD in our office.
I paste schedules from Excel into AutoCAD. I print out the sheets and ghost lines appear on the PDF and hard copy that were not intentionally place in the excel file. What is happening and what can be done about it.
I also paste a tif file on a sheet change the setting to imageframe <0> and a residual line willl appear in pdf and hard copy that seems to be the border of the tif image.
I have autocad 2010 installed on dell n5537, i5, windows 8, 64 bit,.. whenever i open an existing cad file,.. it gives strange lines emerging,... as shown in the screenshots attached, most of the times they emerge from the corners,..
these lines hide n show, when i pan/zoom or move the dwg .
We are using a file created by another company and making additions to it for Interiors. While working in this file we have added some new layers and have begun to hatch new walls. While hatching some of these wall my boss received a message saying that the file had errors. He saved and closed the file at that point. When he re-opened the file a number of lines were missing from the file.
They appear to be completely random - i.e. parts of chairs are missing but not the whole chair, parts of walls but not whole walls. The things missing were not all on the same layer and were not necessarily items that had been hatched.
Note - we are running 2012 and the files were created in 2007
without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
I need to save a drawing file and give it the name of my desire using a single command, I don't want to issue "saveas" and then specify the name in the file name prompt. This problem is has been faced when I was using ScriptPro and I couldn't succeeded to do that. Hence I need to know if it is feasible to do the stuff using a single command. It will be preferred if I can choose the location to save the file also rather than save the file to the default location.
View 2 Replies View Relatedi am doing a simple project making a survey plot for a piece of land that will be broken into subdivision. all measurements are of my starting point. after plotting the starting point i try to draw line that is 113 feet long and at a bearing of N 5d W i have no problem entering this data but when i hit enter it draws a straight line. now i know 5 degrees is much of an angle so i thought maybe it just looked straight and tried to plot the next point which was 542 feet from the last point at a bearing of N 39d E but once again after i put the info in and hit enter or space it would plot a line of the proper length but vertical, not the proper angle i need it at. here is how i would put in the info:
first i choose the lne command and choose my "beginning point" as that starting point for my line then i type 113<N 5d W for the length and direction and hit enter. when i do this it plots a vertical line of the proper length but wrong angle. what am i doing wrong? i have ortho set to off and idk what else to mess with
I was trying for an option with wipeout mask.
Is there any option with wipeout to turn the continuous lines into dotted lines instead of hiding the object? I have been working on one staircase block, i want to show half block as a dotted lines.. is there any way to do that without going in to the block edit and change? thats why am looking for wipeout mask option.
Having never used this command before I am struggling as to where it is located.I imported a U-Bolt in Solidworks format and I am just trying to move the nuts as indicated.
View 5 Replies View RelatedWhenever I use the move command on a line or series of lines that are touching other lines, the lines that aren't part of my selection move with that one line. cad-movecommand.jpg Here's a series of screenshots showing what I mean. I can't move just that line without moving the other lines around it.
View 3 Replies View Relatedget any further with VB.net I'm trying to (re)create some autocad commands (and a own features, eventually).
I'm trying a move command now.A recreation of the Autocad command.
The selection of object works. Moving the set between two points works. The only thing thats too advanced for me is the drag posibility VB offers.
Currently using civils 3D. MY command line/toolbar has for some unknown reason shrunk to 2 inches in length.
When I try to resize it, there is no way to reposition it, resize it, or alter it in any way.
Before I upgraded to AutoCAD 2014 (was using 2012) when I used the MOVE command on 3D geometry (while using the Realistic Visualization) I could see one object move into another. Like, moving a cylinder into a box to represent a button, and I would see it slowly sink into the box as I moved it further and further along.
In 2014, the object I am moving will REMAIN ON TOP visually of all other geometry until it is completely inside the other geometry (at which point it disappears completely). It's hard for me to then judge just how much of it is sticking out during the MOVE command. Once I complete the move command, the proper visualization order is then shown.
In other words, if I have a 10 inch cylinder, and I'm trying to move it into a box so only 2 inches sticks out (as a visual guesstimation), currently I would see ALL 10 inches of the cylinder whether part of it is inside the box or not, until I complete the MOVE command.
I find at least once every project I need to do something like this (skewing/forshortening). If I make a section view of a set design (cutting right through the stage), I'll do that by taking my set elevations and skewing them.
the solution, painstakingly outlined in VIDEO FORMAT, and annotated..?
When you get back up and running, here's a full demo of both the 2D and 3D methods described [URL] ......
Is it possible to move lines from different heights on the Z to "0"?
I am trying to use Architects drawings that have multiple line that look to intersect on looking from the top. but when you view them the front or side they are on different heights.
When I draw lines that don't start/end touching a line drawing by the Arch they are on the "0" height on the Z.
Not sure what they used to draw these original. Using Arch lines as reference to draw detail is not working very well, its taking way to Lang to do anything.
See Attached
Use the view to choose between front, top and Isometric.
Not sure as to why this is happening, but like the title says anytime I use move or grab a grip point my osmode automatically changes itself to settings that I do not want. I can change my osnap settings while in the command to set them back to what I had originally had but this is very tedious and I have not experienced this with previous versions of acad.
From all my searching, the only thing I can come up with is; it is a setting within the acad1014doc.lsp but I am not sure.
I use the following code to assign a reactor to an object:
(setq marReactor (vlr-object-reactor (list (vlax-ename->vla-object oggmar)) "TEST" '( (:vlr-erased . reactor_upd) (:vlr-modified . reactor_upd) ) ))
"reactor_upd" is the name of the function that starts every change or delete the object.
I would like to exclude the command "MOVE", ie if I move the object, I do not want that part to the"reactor_upd" function.
Civil 3D 2013/ When I try to move or un-dock the command line window, a red circle with a line through it appears.
When I switch work spaces still the same result.
I am new to AutoCad 2013 from 2000. When I try to move my command line, because it's in the way, I get a fatal exception error.
View 6 Replies View RelatedI am running AutoCad 2000 and for some reason in recent work I no longer have the command lines visible on screen.
View 9 Replies View RelatedWhenever I try to extend or even move lines or shapes, it also moves the line it's connected to.
So I have a line attached to a rectangle. I select the singular line only, and I try and lengthen it, and when I do the rectangle also moves with the line of the amount I extended it. How do I turn this off? I was able to cope with it for a bit when it first started but now it's just downright annoying.