My brand spanking new Acad2012 cannot copy anything to the windows clipboard...it freezes as soon as I hit enter after selecting the objects I want to copy. The only solution is to taskmanager and kill it.
I've had to go back to using my old AcadLT 2002 in my WindowsXP VM.
Basically my new Sing$2000 SW is useless unless I can copy blocks form one drawing to another.
I've applied this patch: [URL]
Autocad 2012 copy button freezes once i have finished copying and pressing enter. Just been installed 32 Bit
View 5 Replies View RelatedWhenever I place a copy or paste from the clipboard AutoCAD freezes for about 5 -8 seconds and is very annoying. Time is money people. I know it's not a RAM issue. I don't have the problem with 2011 when I go back to it. What gives Autodesk? When is the next service pack due? This only happens with teh copy command
View 9 Replies View RelatedI am having PDS Ultimate 2012 and working on inventor. when i open a file or open a new template ribbon freezes means menu bar doesn't work properly,if i change the ribbon appearance it doesn't update also i cannot switch between the menu bar tabs and if i turn on the visibility of the datum planes it doesn't show on the screen.But when i refresh the windows everything works sometimes. i have installed SP1 and even repaired inventor.
System Config:
OS Name Microsoft Windows 7 Professional
System Manufacturer LENOVO
System Model 20079
System Type x64-based PC
Processor Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2300 Mhz, 2 Core(s), 4 Logical Processor(s)
Name AMD Radeon HD 6370M
Adapter Type ATI display adapter (0x68E4), ATI Technologies Inc. compatible
Adapter Description AMD Radeon HD 6370M
Adapter RAM 1.00 GB
My view is freezing in Architecture 2012 and when I close out of my drawing and open it again, the problem is fixed. What am I doing to make it freeze? It seems like it does it the most if I am in isometric. Also, I am working in a project manager and there are no Xref's attached.
View 4 Replies View RelatedMy autocad lt 12 crashes when I try to copy or cut to the windows clipboard. It only does this in some older drawings. I have to kill autocad and restart. I use copy and pasting between drawings quite extensively. I am desparate for a fix for this I use Windows 7 64 bit.
View 7 Replies View RelatedI just started using Inventor and it is very slow, freezes for a few seconds, and is non responsive. My AutoCAD Architecture 2012 works just fine.
View 6 Replies View RelatedSince last week (4-19-2012) Our users have been expierencing cursor issues and freezes with Civil 3d 2012. Entering commands in the command line very slugish, pressing the shift key to select / de-select, trim, open osnap menu, ext.
We are running Win7pro6d bit quad core machines with 6gb ram, ATI FirePro V4800 (FireGL), Intel Xeon ES640 (2.67 ghz). AutoCAD Civil 3D(SP2) and all hotfixes installed.
This problem just started one week ago and It started with the cursor jumping all over the place when crossing objects. However; we now have very sluggish command line entry, 2 - 3 seconds after typing till it shows up, and cursors freezing when pressing the shift key for any reason.
Just got AutoCad 2012. Commands like Mirror and Copy which involve duplication (no problem with Move or Rotate, for example) will cause AutoCad to not respond for a few minutes. I believe it only is an issue with files brought forward from AutoCad 2000.
View 6 Replies View RelatedBecause the new Building Suite Design programs won't run on windows vista, I've been upgrading some of our older computers to windows 7. Most are working fine but having problems with one computer.
Specs of this computer (it's pretty old I know)
Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz (4 CPUs), ~2.5GHz
Asus P5K SE/EPU
NVIDIA Quadro FX 570
8gb ram
So I formatted this computer and installed windows 7 64x pro, installed all the software etc. This computer is also part of a domain. Problem now is opening some AutoCAD files on the server, edit the file then hit the x in the corner to close it, we hit yes to save it then the whole computer just freezes. It doesn't happen with all files, just some and I can't work out what the problem is. ALSO when copying some CAD files from one project folder on the server to another project folder on the server it freezes. No problems copying files to the local computer/desktop, just server-server. The graphics card driver is up to date etc.
So we have this custom construction note routine. It creates all the notes with station, offset, blah blah , and it is all together as once piece. So if you move the note group the leader will stay attached to it and it holds all of the label properties.
When I copy clip, wblock, insert these key notes into another drawing they are no longer a group and there is no way to move them all together.
This has created a lot of extra work and moving stuff around that does not seem necessary.How can I copy or move construction key notes from one drawing to another without losing the group properties. I have tried WBlock and making sure the grouping is on when I copy and paste/insert them but it still doesn't work.
Oh and we are running a 64bit 2013 with the carlson suite application,
I am facing autocad-2014 error is "copy to clip board failed" entire drawing getting same problem,one particular file giving problem.
View 1 Replies View RelatedI am using ACAD 2000. My wblock and copyclip commands are not working only in one specific drawing. I am working in modelspace.
When I wblock it lets me select the objects and assign a file to save the objects to. When I hit OK it gives me no error but no file is created.
When I copyclip it gives me no error, but when I pasteclip, nothing happens.
I tried saving the drawing as something else. This drawing simply won't let me copyclip or wblock. I can use the copy command to make multiple copies of the object in question within the drawing. I tried restarting my PC and this particular drawing still has the same problem. Other drawings are fine.
When I copyclip a dimension from one drawing with UCS set to world/north, then paste into another drawing with UCS rotated in Z (south for example), the text remains oriented to north. The original drawing doesn't have to be set to world, just something different from the paste orientation.
Is there a way to have the text orient itself to the current UCS at paste?
I bought the Adobe CS5 master collection from a deal at my university. This error only started happening today, it was completely fine for the last few months up til yesterday, so it doesn't have anything to do with my specs probably.
Whenever I try to copy an image (ctrl + c), Photoshop would freeze. No error, no popup or anything, simply a freeze. The mouse cursor doesn't even turn into that loading icon, but nothing would be click able and any animations (like marquees) would stop.
Specs:
Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
Intel i5
Also Photoshop CS5 has a lot of bugs when Flash CS5 is also open, causing a ton of crashes of either Flash or Photoshop. It's like these two programs don't like each other. I'm surprised this didn't go noticed during testing ?
This is the first time I experience a major problem with Revit 2012. I created a duplicate of an 8" concrete masonry wall for my student project. Then I selected the Edit option in the Structure to change the rendered material to concrete masonry. Suddenly the program freezes and crashes. A window pops up stating that Windows has detected a problem with Revit and must shut the program down. I've everything since my last save. As of now, I recreated a duplicate of the masonry wall I need and started drawing some of the walls for my project but I'm afraid to experiment with other materials. Background Information about my computer: I downloadeda free version of Revit 2012 student software to practice at home. I have Windows 7 64-bit, 6GB of Ram and Intel (R) Core i7 2.20GHz...(I checked all the software requirements before downloading the correct version of Revit 2012)
Do I have to uninstall the program and reinstall it again? Would the problem go away?
Recently Photoshop CS3 Extended freezes when I launch it on my Windows 7 (64 bit) computer. The splash screen appears but then it just stops working (usually on initializing Tools).
I have read several things so far. To fix it I tried:
- disabling the TWAIN plugin
- resetting all tools
- deleting the Photoshop preferences file.
- deleting my printer from the control panel (some others said printer drivers could cause it)
My copy of CS5 photoshop freezes when opening saved psds and currently I cant find my cd key for it (in case I need to reinstall) what should I do?
View 6 Replies View RelatedI'm attempting to use CS3 on a Dell laptop- 64 bit- Windows 7.
When first installed it worked fine, then suddenly it was non-functional. It will open, but ANY request at all will cause it to freeze. I have to close it through Task Manager. I get no error messages, and when I went in to view the event viewer there is nothing there under Applications.
I've changed the default printer to a non-network but haven't done much else as I don't have administrative privileges on this (work) computer. We tried uninstalling and reinstalling and that did nothing.
I finally can get Organizer to run by using the new short cut I created but Editor refuses to display anything other than a small gray box on the upper right side of my desktop and a border that is missing a substantial amount of pieces!
View 3 Replies View Relatedcan i clone (not copy) cfx clip ? so any update made to the cfx clip will automatically update all the instance ?
View 2 Replies View RelatedI want to use some portions of a clip that I have modifyed to another new project. I tried with copy/past, but they are not transfered to the new project.
View 3 Replies View RelatedOur Cad person recently switched from a dying windows machine to an iMac. I know you can do the liscene transfer (the windows pc is being put down) however I can't find anyway to get the LT 2012 Mac download. (The disc is a windows only) I thought about just getting the trial but only 2013 is offered and we don't plan on updating as of yet.
View 3 Replies View RelatedWhen trying to Save Copy As:
1) When setting file type to AutoCAD dwg or dxf, Inventor has to "think" for about 30 - 45 seconds (i.e. the hourglass cursor shows up).
2) I press 'Options and Inventor "thinks" for about 30-45 seconds, but nothing happens, no DXF export wizard pops up, so I can't change any export settings..
3) If I press save anyway, I get an error message: "problems encountered while saving the document" I have tried repairing, reinstalling, and uninstalling inventor but each option fails.
I have recently upgraded to AutoCAD LT 2012. The copy/paste function and the group/ungroup function are not working. I have run service pack 2 with no improvement.
View 9 Replies View RelatedMy AutoCAD often will not copy & paste. It prompts for insertion point and when picked nothing appears. This happens on many different drawings. Windows 7.
View 2 Replies View RelatedHow would I copy a single clip from 1 project to another?
View 1 Replies View Relatedjust tested. no good. don't do it.
just a friendly warning. stick with 2013+win8
or
2012 + win7.
crashes all the time editing alignment/profile. (better). and corridors. (very bad).
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
I've downloaded it several times, but it seems it just will not install.
heres the log:
2012/10/11:15:59:33 midnit_angel13 ANGEL === Setup started on ANGEL by midnit_angel13 ===
2012/10/11:15:59:33 midnit_angel13 ANGEL Launch
2012/10/11:15:59:47 midnit_angel13 ANGEL === Setup ended ===
[Code].....
I have windows 8 on new asus laptop N56VZ. Installed civil 3d 2013 with no problems (i see some people have problems with installing) but it doesn't work normal. It crashes every time i try to edit an alignment, old or new.
I had windows 8 beta on an older asus laptop and civil 3d work there normally. Then I upgraded it to win 8 and it started crashing like described.Today i bought that new asus n56vz with windows 8 and it is crashing.
I just installed Civil 3D 2012 64 bit on a new computer running Windows 8. It starts up fine, but when I pull up a drawing, about 1 or 2 minutes later, the program shuts down and I have to restart Civil 3D. I've pulled up several different drawings from different sources, and it does the same thing. First, a window pops up for a split second, and I can't read the contents of the window. Then, I get the window that says Civil 3D is shutting down.
View 9 Replies View Related