AutoCad :: Loose Grouping When Using Copy Clip
Feb 12, 2013
So we have this custom construction note routine. It creates all the notes with station, offset, blah blah , and it is all together as once piece. So if you move the note group the leader will stay attached to it and it holds all of the label properties.
When I copy clip, wblock, insert these key notes into another drawing they are no longer a group and there is no way to move them all together.
This has created a lot of extra work and moving stuff around that does not seem necessary.How can I copy or move construction key notes from one drawing to another without losing the group properties. I have tried WBlock and making sure the grouping is on when I copy and paste/insert them but it still doesn't work.
Oh and we are running a 64bit 2013 with the carlson suite application,
View 0 Replies
ADVERTISEMENT
Jan 20, 2014
If I copy paste something I loose the live paint area.I´m using the adobe illustrator CC. With CS5 I didn't have this problem.
View 4 Replies
View Related
Mar 18, 2012
My brand spanking new Acad2012 cannot copy anything to the windows clipboard...it freezes as soon as I hit enter after selecting the objects I want to copy. The only solution is to taskmanager and kill it.
I've had to go back to using my old AcadLT 2002 in my WindowsXP VM.
Basically my new Sing$2000 SW is useless unless I can copy blocks form one drawing to another.
I've applied this patch: [URL]
View 5 Replies
View Related
Nov 28, 2013
I am facing autocad-2014 error is "copy to clip board failed" entire drawing getting same problem,one particular file giving problem.
View 1 Replies
View Related
Nov 26, 2008
I am using ACAD 2000. My wblock and copyclip commands are not working only in one specific drawing. I am working in modelspace.
When I wblock it lets me select the objects and assign a file to save the objects to. When I hit OK it gives me no error but no file is created.
When I copyclip it gives me no error, but when I pasteclip, nothing happens.
I tried saving the drawing as something else. This drawing simply won't let me copyclip or wblock. I can use the copy command to make multiple copies of the object in question within the drawing. I tried restarting my PC and this particular drawing still has the same problem. Other drawings are fine.
View 9 Replies
View Related
Oct 5, 2011
When I copyclip a dimension from one drawing with UCS set to world/north, then paste into another drawing with UCS rotated in Z (south for example), the text remains oriented to north. The original drawing doesn't have to be set to world, just something different from the paste orientation.
Is there a way to have the text orient itself to the current UCS at paste?
View 3 Replies
View Related
Nov 20, 2012
can i clone (not copy) cfx clip ? so any update made to the cfx clip will automatically update all the instance ?
View 2 Replies
View Related
May 22, 2013
I want to use some portions of a clip that I have modifyed to another new project. I tried with copy/past, but they are not transfered to the new project.
View 3 Replies
View Related
Dec 29, 2011
I have a scanned drawing (PDF) and I want to use it a a xref so i can redraw it (originals have gotten lost ). But is really big and makes autocad really slow.
Is there a way to make a scanned drawing in PDF have loose object / lines again?
View 4 Replies
View Related
Nov 11, 2012
How would I copy a single clip from 1 project to another?
View 1 Replies
View Related
Feb 6, 2013
I draw a closed polyline and then I extrude it. But when I want to see the 2d plane and hide the 3d version I cannot go back as the polylines are extruded and everything is disappearing. Should I draw a second poly over the first, then create a new layer, name it for example 3dpolywalls ? Is this the most common technique? Or there is a more efficient way ?
View 2 Replies
View Related
Feb 28, 2013
How can I copy the timecode from the clip in my viewer, and jump to that point in another clip?
I use this often to compare the same point in time for an offline to online clip. I can open the timecode input window, and manually enter the timecode from one clip to another, but I can't seem to find the copy and paste commands that will use that timecode as the input.
View 1 Replies
View Related
Sep 17, 2013
I've never cared for the Ribbon. IMO it takes up a lot of valuable screen real estate and spreads out commands I find to useful to be grouped together across multiple menus. I did like how the Menu Bar was laid out in LDD because all the commands for anything I could do with alignments, for example, were all in one place.
Here's how I set up C3D to have an UI more like LDD:
1. Show the Menu Bar: click on the dropdown menu button on far right of the Quick Access Toolbar (at the upper left of the C3D screen) and select Show Menu Bar. Old familiars like File, Edit, Points, Alignments, etc should be visible.
2. Get rid of the Ribbon: type RIBBONCLOSE into the command line and ta-da!
View 1 Replies
View Related
Apr 18, 2008
I've been working on a poster composed of several groups of layers and probably around a total of 80 layers. When I flatten the image, I loose all of my layer effects, things like bevel and emboss on text get flattened out.
View 3 Replies
View Related
Jun 19, 2013
When I upload photos to[URL]... They will either be a very large file size and delay the download of the page or they will come out grainy. I have tryed adjusting them in Photoshop, but I will either loose quality or they will not be compressed enough. It there an easier tool that I am missing?
View 1 Replies
View Related
Apr 12, 2011
I installed the download/trial version of X4. I decided to purchase but went through an education/academic seller since I work at a university and get better prices.
I thought I could just input the serial # of the disk I bought but obviously there is a difference in the 2-versions since it won't accept the "educational version" serial #.
So, I figure I need to uninstall the download/trial version and install the what I got on DVD.
I am concerned about loosing the info in the libraries. I made a spare copy of the projects, just in case the uninstall does something with them.
View 5 Replies
View Related
Nov 26, 2013
I was wondering if it would be possible to do the following:
Parameters who can vary for lets say a rectangular profile with:
80x50x2
80x50x3
100x50x2
That these data sets/parameters are grouped/linked to eachother in the Parametric Table.
So when I'm doing my analyses with the profile of 100 and I change the wall thicknes from 2 to 3mm the 100 changes to the 80 variant automaticly, or asks me which version I want.
It would be handy to avoid mistakes with non excisting combinations of profiles.
Is there a custom app for Inventor that allows you to manage parameters easier? (Grouping wise to keep a better overvieuw.)
View 1 Replies
View Related
May 24, 2012
I use object grouping for several different things in AutoCAD. With the release of ACAD 2013 I occasionally get the following message upon opening a drawing:
Associative Network Evaluation Error
The object cannot be resolved or value limit has been exceeded.
Inconsistent associative objects my display geometry and grips incorrectly and update in unexpected ways when edited. You can undo to restore the associative object to its previous state.Upon receiving this message, all groups have been removed from the drawing.
View 9 Replies
View Related
Jan 27, 2010
Inventor 2010 / I'm finding myself scrolling up and down the browser bar quite a lot to get to the Solid Bodies folder for example, and I was wondering if it was possible to group features into folders or something to make the journey quicker, with the benefit of also being able to just organize things a bit better.
View 9 Replies
View Related
Aug 17, 2012
I was working with inventor 2010, and i am want to link surface roughness symbols and text. so that they will be grouped together.
View 1 Replies
View Related
Sep 16, 2013
I have an assembly that I have the BOM property set to phantom. Consists of 7 parts, each have a bom property of purchased.
All parts are the same but cut to length in the shop. Parts list are based on parts only BOM. If I create a parts list based on just the assembly, I can group the items, they all have the same part number, and display the group participants, and the item numbers and everything works as expected.
If I use this assembly as a subassembly in a larger assembly and create a partslist with the same group keys, the subassembly does not show as a group, does not show group participants or corresponding item numbers.
What I'm trying to do is show total length of a product that we buy on a spool for this assembly. To do this I'm using substitution in the qty column. Most parts are purchased each, these are purchased by length. What would cause the parts list to display as a group in one list but not in the other?
View 3 Replies
View Related
Oct 20, 2013
Is subtotaling still impossible with ACA 2014?
Is there a workaround to what I am trying to do? I just want to create a table that has a list of all the spaces sorted by name, give a quantity of the spaces and the combined area of all those spaces in one row of the table.
Roughly:
King 4 2000sf
Queen 2 1000sf
Suite 4 3000sf
My attached schedule gives a row for each space, except that it groups spaces of exact same areas. I want a single row for each room type.
Also, when working with spaces sometimes using Space_Add, Generate I am met with the response that a space already exists and no space can be added. The "phantom" space does not show up in the schedule, thawing all layers does not reveal any space and I've tried all my selection tricks to parse a space from the closed boundary that appears empty.
View 4 Replies
View Related
Mar 8, 2012
I want to be able to take a few parts and group them together to make them appear as one single entry on the parts list.
Example: I have a Liquid Level Switch, Mounting Bracket and mounting hardware in the assembly as separate parts. On the .idw Parts List I need to have them show up as one item, as a 'LLS Kit' phantom.
Also, these parts will be used on other assemblies and will probably be used with other main components (ie. Temperature switches, pressure switches, etc.) so then need to remain independent of one another.
View 7 Replies
View Related
Oct 7, 2012
When I use photos, they pixelate slightly and loose quite a bit of clarity as soon as I press play. Why is this?
View 2 Replies
View Related
May 19, 2012
When I collect objects into, say, a drawing of a bicycle, I can do this with grouping or by creating a block (and I don't know what else). If one of the objects in the bicycle collection is itself a collection of objects--for example, a "front wheel" made up of tire, wheel frame, and spokes objects--what "grouping" method do I use such that when I explode the bicycle it only explodes the first level of objects--the objects that made up the bicycle become separate objects, but the objects that make up the front wheel stay collected as a "front wheel." (Or, is there a less deep form of explode?) Blocking the most detailed objects seems burdensome.
View 1 Replies
View Related
Feb 3, 2012
I can toggle "Selection Modes, Object Grouping" on by checking the box and save my file. When I close AutoCAD 2012 and come back in Object Grouping is turned off again, even if I pull up the same drawing. I can't seem to find a lisp function or command to turn this on. Seems that my only option is to go back to the options each time and turn it on. I've got a registry entry or a lisp command I an issue to keep this turned on.
View 2 Replies
View Related
Apr 18, 2011
I am developing 'enterprise' tool palettes which i've put on a networked drive to which i have write permissions and the users have read-only permissions. Within these palettes, each palette has separators and Text titles to group the commands and these groups originally appeared on everyone's computer as i expected when i first made them available. But now when i add new commands to a palette on the networked drive, the new command appears on the correct palette, but at the bottom of the palette, on the user's computers.
I have made provisions for each user to create their own collection of palettes, which are saved on their own directory and, of course, they can do whatever they want with them. But i want to prevent them from re-organizing the enterprise palettes and more importantly, if i add a new command in palette "X" and locate it in group "y" of that palette, i want it to be in that location when the users view it.
Is there some way to make the enterprise palettes on their computers look like i arrange them?
View 5 Replies
View Related
Aug 23, 2013
I have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
View 4 Replies
View Related
Sep 20, 2005
How can I group objects is CS2? (For instance, I have text and a picture of the earth. I want the text background to be the earth.) I know it's basic, but I cannot figure out how to do it in CS2.
View 3 Replies
View Related
Feb 10, 2013
How to group colors with out clicking on one and dragging it to the position of other colors? 148 different hues gets to be a long and tedious endevour. I'm using XP, 2.3 G processor, with Corel Draw graphics suite X6.
View 2 Replies
View Related
Jul 30, 2005
How do I do it?
View 8 Replies
View Related
