AutoCAD 2010 :: Selection Modes Object Grouping Not Staying On
Feb 3, 2012
I can toggle "Selection Modes, Object Grouping" on by checking the box and save my file. When I close AutoCAD 2012 and come back in Object Grouping is turned off again, even if I pull up the same drawing. I can't seem to find a lisp function or command to turn this on. Seems that my only option is to go back to the options each time and turn it on. I've got a registry entry or a lisp command I an issue to keep this turned on.
When I select an object and pan to make another selection the first object "deselects". The object(s) will stay selected until I pan and as soon as I start to pan the grips go away and the object(s) is deselected.
I have a bunch of students who load tool bars and dock their command line, but as soon as they close AutoCAD and reopen, the command line is floating again and the tool bars are missing. Saving and importing a profile does not seem to work!
I use object grouping for several different things in AutoCAD. With the release of ACAD 2013 I occasionally get the following message upon opening a drawing:
Associative Network Evaluation Error
The object cannot be resolved or value limit has been exceeded.
Inconsistent associative objects my display geometry and grips incorrectly and update in unexpected ways when edited. You can undo to restore the associative object to its previous state.Upon receiving this message, all groups have been removed from the drawing.
I cannot get the advanced select objects tools to work.
I type:
select <enter>
wp <enter>
Make my polygon, and then I'm stuck in a single item select mode. If I hit enter, they all unselect and I can't do anything. Typing a command (like "m") does nothing.
Typing m <enter>, and then doing the selection yields the same result. At the end of my selection process and I hit <enter>, it sits in the single object selection mode (the little box cursor). Hitting <enter> here again makes the selection dissapear and I'm back to square one.
every time I select something a small box pops up in my way with the object's properties. I can't figure out how it became turned on, and don't know how to get rid of it.
I have some serious fight this morning with AutoCAD. I have to dimension my drawings properly so it can be build. I did some already, a few aligned dimensions in an layout snapping on modelspace objects. when i put them all is fine and right dimensions.
BUT after i saved, closed the file and opened it again those dimensions are everywhere exept where i put them originally. And no the modelspace objects are not moved.
How can this be? can i solve this? or is this a know bug for AutoCAD 2012? i can't check all the dimensions before publisching again and again.
I like to set up my draw order within my CAD file since I use many XREFs to create my design. Every time I go back into the drawing the draw order reverts back. How can I get it to stay in the order I have changed it?
When objects are selected, they don't show up on the properties panel (or on the Quick Select panel either) It doesn't matter what method I use:
-Pick one object (lines, arcs, circles, blocks, etc), the Quick Properties flyout appears, but empty. Properties flyout show "no selection"
-Window-select object or objects. Quick Properties bar shows up empty again. Properties flyout show "no selection"
-Click on the Quick Select icon. It prompts me to pick geometry. I do. The Quick Select window comes up, but where it says "Object Type", it only has the option "Multiple", and not the normal list of the geometry you selected.
Have Autocad 2011, as well as Autocad 2010 and Inventor 2010 (trial license) on the same machine.
Intel Core2 Quad Q8200 2.34 GHz 8 GB RAM Windows 7 Pro 64 bit
When I assign an object to a path using the default setting the object sits nicely on the first point of the cv curve in the path. And moves fine going in one direction but as it goes around a corner it is offset from the curve but continues along with this new offset until the end.
When using object snap feature, if a particular point has multiple roles, by which I mean it could be {endpoint, node point, circle, intersection, etc.} at the same time, is there a way to toggle the snap point selection?
mt.png
For example, does there existKey or key combination 1: Change the object snap mode to “single” amongst all enabled modes. Key or key combination 2: Iterate one by one through all available modes.
I recently subscribed to CS6 and wanted to use the Smart Object Stack Mode, but found out the subscription CS6 is not the Extended version.Smart Object Stack modes is just for the Extended version.
When I select a hatch or polyline or any object with grips for that matter, and hold down shift to select multiple grips on the object or objects and then press my middle mouse button to pan or scroll it to zoom, the grips that I have selected de-select, meaning I have to set up the view so that all the grips I want to move are visible before selecting them.
This is only happening on some drawings (although it is most of them) and only when I use 2012 not 2011. Which system variable it is that has gone screwy that I need to reset? or is it something else?
how to put a 3D object on top of the another 3D object in autocad"! E.g.,I want to put a 3d object of one leaf (raised 1") on top of the vase, so that the edges of the leaf are placed completely on the surface of the vase.
I extruded the leaf 1" first, then tried to copy it on a solid cylinder of a vase, but it didn't work!!! It seems to be simple, maybe not!
I am working on a drawings with nested xrefs and am experiencing major delays when selecting objects using crossing windows. It is as if the computer thinks I am selelecting the xref even though the curser doesn't touch any visible exref entities. Basically, I click to start the window and the curser freezes for 10 to 20 seconds. I am experiencing the same problem with other commands (intermittenly) such as move, line, and offset. The exrefs are on a separate locked layer and have been moved to the back of the drawing.
Having problem with object selection when covered by other objects ie lines,arcs etc on a solid model---autocad 2011---did not seem to be a problem in 2006 version,but wondering if switching layers on and off is the only way?
I'm having a problem setting layers in various viewports. I set them (using VP freeze), they appear to be fine, I save, yada yada, but after a while all the layers turn back on within the viewports. Very frustrating. I am starting to think that there is a fundamental problem with my layers system- possibly having to do with my profile setting, but I don't know enough about setting and managing profiles to know where to start. Or it could be something else.
I've got a bunch of tags with a dedicated "tag mode" style, and if I select them individually I can add them to a table, no problem. However, if I try to do a mass selection of a swath of labeled lines or arcs i get the option to convert all non-tag labels to tag lables (I don't want that) OR don't add those labels not in tag mode (presumably keepin those that are). The problem I have is if I select the latter it deselcts everything. Am I missing something or does this not function as it implies (or at least how I wish it would)?
I have a pice of code that select MText in my drawing. It looks that it select the MText in ALL my drawing and I am interested to choose the MText that is in the Model Space only.
The piece of code that I have is:
'Adding a Selection set in the drawing Set objSS = ThisDrawing.SelectionSets.Add("TestSelectionSetOperator") 'Using 4 filters to store in objSS -Selection Set- MText which is located in the Layer Text_MSpace ReDim intCodes(3): ReDim varCodeValues(3)
[Code] .....
How to add a criteria to choose the MText that is in ONLY in my model space?.
How can I remove an object I just selected from a selection set? I can't find the setting that allows this. Is it some combination of items check under the selection modes in the options menu?
I was wondering if it would be possible to do the following:
Parameters who can vary for lets say a rectangular profile with:
80x50x2
80x50x3
100x50x2
That these data sets/parameters are grouped/linked to eachother in the Parametric Table.
So when I'm doing my analyses with the profile of 100 and I change the wall thicknes from 2 to 3mm the 100 changes to the 80 variant automaticly, or asks me which version I want.
It would be handy to avoid mistakes with non excisting combinations of profiles.
Is there a custom app for Inventor that allows you to manage parameters easier? (Grouping wise to keep a better overvieuw.)
I work for a company that has several AutoCad seats. I have created a block with 4 attributes. On my computer and others the block works fine. On one computer 3 of the 4 attributes are placed at 0,0 instead of with the block.
I am a user of AutoCAD 2014 plain vanilla. I created a title block for my company which has worked well for a year or so. Recently, I have been experiencing the following. After inputing info like an address, sheet name etc. into an attribute definition everything will be fine. When I go and work on other other pages in paperspace, and then return, I will find that the text has dropped vertically into an area it shouldn't. how to remedy this? Attached is a screenshot.
Command Line being undocked and not staying where you move it to? I'm setting up my AutoCAD 2013 install at work and I love the new Command Line functionality but I like it just above the Layout Tabs and to the left. Every time I close and open, geographically the Command Line is on the same X-Axis (in relation to the screen, not literally in a drawing window). But it re-centers on the screen.
When selecting an object in 2013, entering the command and trying to select the object without moving the mouse will not select the object on the first pick. You must select the object a second time before the object is selected and highlighted.
Steps to reproduce:
1) Hover over desired object
2) Enter command on keyboard (M, E, CO, etc...
3) Do not move the mouse and attempt to select the object
Nothing is selected or highlighted
4) Attempt to select the object a second time
Object is now selected and highlighted
The same thing occurs if you attempt to create a selection window or crossing window immediately after entering a command without moving the mouse and clicking the first point.
This does not occur in vanilla 2012. I do have Raster Design installed with 2013, so not sure if the issue stems from the add-on or not.
I can use SolidSelection.Item for 3D object's handles and but I can't take 3D object's volumes with SolidSelection.
Then I can put object 's handles(1EE) to a collection. Can I use SolidSelection to keep my 3D volumes values? All sub-structure of my program works with SolidSelection Object.
Volume Codes;
For Each tEnt In ThisDrawing.ModelSpace If TypeOf tEnt Is Acad3DSolid Then Dim tEntSolid As Acad3DSolid Set tEntSolid = tEnt tmpVols1.Add (tEntSolid.Handle & "/" & tEntSolid.Volume) End If Next
I can't match with returned result of these codes and SolidSelection.item(i)
For Each tEnt In ThisDrawing.ModelSpace If TypeOf tEnt Is Acad3DSolid Then Dim tEntSolid As Acad3DSolid Set tEntSolid = tEnt tmpVols1.Add (tEntSolid.Handle & "/" & tEntSolid.Volume) [code]......
Inventor 2010 / I'm finding myself scrolling up and down the browser bar quite a lot to get to the Solid Bodies folder for example, and I was wondering if it was possible to group features into folders or something to make the journey quicker, with the benefit of also being able to just organize things a bit better.